Latest
If you’re like me, you’ve never heard of FitNord before. This is a Finnish brand and as far as I can tell, they only sell their bikes in a few...
BESV is out with a refreshed line of full suspension emtbs. The cheaper TRS models come with an alloy frame and two options of suspension travel...
Recent posts
Anyone using a Northshore bike rack with your EMTB?
I'm short and have a vertical hanging type North shore rack. I saw the suggestion to pull the...
New E160 RSX - anything to look out for
How are you finding the weight compared to the levo?
Just pulled the trigger on my 1st EMTB!
Hi
Welcome to the Darkside (y)
New member building a emtb
Welcome to the forum and happy building :)
Brose-S Belt Replacement Costs
I do all of my own bike service and after about 700 miles my original Brose-S belt broke. I...
Increasing front travel and rear tire size on new Mx heckler
I just bought a used Heckler MX 2021 and my buddy extended the Pike to 160mm already. The seat...
EDC Lite - Fox 38 Performance Elite
Can anyone clarify of the EDC Lite toll fits into the Fox 38 Performance Elite Forks
The kids...
When is an eMTB too heavy?
Lock with vertical plate is about 400gm, printed bracket is about 30gm, so save about 370gm...
Shortening carbon bars
Thanks everyone. Job done and all is well.
Awesome 👏.
If you cut the bar too short just use a...
Derestricting Cannondale Moterra Neo 3
Hi Danny, any updates on this? I'm looking into derestricting a Moterra 3 as well
See my reply...
Trek Rail upgrades, what have you done?
Newer Gen 4 carbon rails have a 1.8 lower, mine has the same
@bfletch2006 - if your existing...
What did you do to your EBike this week?
Heard good things about this bell so I’ll give it a try.
But I didn’t expect it to weigh this...
Ard Moors on an ebike?
Good to know! Were you kicking yourself you didn't use the higher modes a bit more?
Lets discuss uphill crashing.
Are you sure you haven't had a few "offs"that didn't involve a bang to the head mate ? 😂
Ha Ha...
Assembly frame LightCarbon LCE971 bafang M510 (By Denver)
I asked for an update on scheduling from Jim at LightCarbon and apparently they're making some...
S4 for 6' tall? anyone tried this and happy w/ it or are most saying it's too small?
interesting my friends had 7 motors on his 2019 got no option of replacement bike. Maybe its a...
New M820 frame from Seraph/TanTan, the E67.
temon10, have you tried testing to see what range you can get with your full DIY battery on...
LETS SEE YOUR RIDE FOOTAGE
Yeah I like watching peoples lines on trails I know to see where I can improve. For instance...
Bosch CX Race ltd motor failed at 230 miles
Pazman, I'll also add that all the emtb's in my area pretty much operate almost exclusively in...
Haibike LYKE - Show and tell!
No motor issues on here with these yet? My Heckler SL is giving me nightmares….
Zero motor...
Going to Santa Cruz next week, need EMTB rental recommendations
Specialized has a factory store in town, it's next to the Patagonia Outlet and it's close to...
Clicking/knocking sound Bosch CX Gen 4 motor
Same noise when the motor was put in a different bike. They still don't know what is causing it...
Pole Voima swing arm CRACKED
My swing arms are ok so far (Modell 2023). But if they break, then unfortunately yes :confused:
Any experience with Moterra SL out there?
Interested in actual experience rather than practical thoughts :) Specs are VERY impressive, but...
2022 Bullit build
Just wanted to give an update to the creek coming from my battery. After doing a full days ride...
Mullet Setup Effect on Range
So, I have for over a year now had two Levo Comps that are extremely similar with the exception...
Shimano speed sensor
I guess only Mister Shimano would know the answer. It’s like a lot of electrical problems that...
Official Trek Fuel EXe Megathread!
I just dropped mine off today to have the motor swapped out for the same noise. There was no...
E82 Dengfu frame now available
I wish these guys had just released a size L quicker, I ended up going with a LightCarbon mostly...
Anyone knows DengFU?
I am very happy to come to the EMTB forum to communicate with more like-minded friends. I hope...
You can ring my bell!
Or if your in a country where they drive on the LEFT, move to the left and let you pass on the...
Carbon, Full-Susp, Motor-less frame for Bosch Gen4 750W Powertube?
Its early all 1st gen and still OK at about 1000miles. I have the frame only for sale but...
2024 Strive:ON
Another issue is the top mount were the battery fits to , lose bolts from factory
Yeah,I've...
Anyone ever replaced a CX Gen 2 for the new Gen 4
I have 8sets to sell. If someone want please write on priv.
Home Batteries / Solar
Hello friends,
I am learning about this subject that I was unaware of until now..
@Rob Rides...
Orbea rise emtb rider here
With the Rise, you're supposed to forget that you have an ebike (except for the whine the motor...
TQ HPR50 Grinding Noise
I am living with it. Got my first bike in Oct 22 and i asked Trek to replace the motor before...
Cascade Components 2023+ Levo SL Link
I am coming off a gen 3 Turbo Levo with an EXT E-Storia and Cascade Components long travel kit...
Controller lights
App is fully updated. Bike ran fine, it’s my kids and he just ran the battery down the other day.
Replacement tyres wanted.
I've got nobby nics on my bike, I ride everything from asphalt, gravel , trail rides and some...
Official 2022 Kenevo SL (KSL) Megathread!
Has anybody been running a coil shock?
I am riding the Float X2 with about 260Psi and was...
Bosch Gen 4 Chainring Nut printed Torque of 25 to 30 NM is likely wrong
Guess what the new Bosch lockring that I just bought and installed says on it? 35 nm
Edit...
EMTB Forums
Articles
-
Bike Reviews 28
-
News 45
Latest News Comments
-
The new 2025 Orbea Rise - my wish come true?Had my first ride today. I can confirm that the motor is more powerful than last years model, it now feels close to full power emtbs...
-
The new 2025 Orbea Rise - my wish come true?Does anyone know if the new 630W battery is compatible with the previous version of the Rise running an EP801? Would be a nice upgrade with no...
-
-
The new 2025 Orbea Rise - my wish come true?Did you got for the LT or SL? Look forward to a ride report. -
A new superlight Cube AMS Hybrid ONE44I don't remember Cube saying anything about max fork length. But adding 10 mm might just be a good idea. It adds a few mm of bottom bracket... -
The new 2025 Orbea Rise - my wish come true?These things are a bit like electric cars worth way less when you drive it off the forecourt, let alone a year later when you have ragged the arse...
-
A new superlight Cube AMS Hybrid ONE44Do you think replacing the fork with a 150mm one is a good idea?
-
The new 2025 Orbea Rise - my wish come true?I didn’t last long. New Rise(s) on order. After a bit of reading round it looks like the new 630 battery is just 600g heavier than the original... -
The new 2025 Orbea Rise - my wish come true?Some personal thoughts on the Orbea production line (very good) and marketing strategy (very bad)! I am really getting sick and quite mad about...
-
2023 Specialized Levo SL Comp Carbon reviewAfter having it for a while is this still a problem? I’m considering this bike but the battery size is meh
Latest Threads
-
Anyone using a Northshore bike rack with your EMTB?
- Started by cragginshred
- Replies: 0
-
-
-
-
-
-
-
-
Going to Santa Cruz next week, need EMTB rental recommendations
- Started by Jasong911
- Replies: 2
-