• Warning!!

    Riding a tuned or deristricted EMTB is not a trivial offence and can have serious legal consequences. Also, many manufacturers can detect the use of a tuning device or deristricting method and may decline a repair under warranty if it was modified from the intended original specification. Deristricting EMTB's can also add increased loads for motors and batteries. Riding above the local law limit may reclassify the bike as a low-powered bike, requiring insurance, registration and a number plate.

    Be aware of your local country laws. Many laws prohibit use of modified EMTB's. It is your responsibility to check local laws. Ignoring it, has potential implications to trail access, and risk of prosecution in the event of an accident.

    UK Pedelec Law

    Worldwide Laws

    We advise members great caution. EMTB Forums accepts no liability for any content or advice given here. 


SC-E6010 with E8000 motor - options

Coopers

New Member
Dec 31, 2019
15
9
Australia
Turns out my 2018 bike has only the SC-E6010 display coupled with the E8000 motor. So, no bluetooth for me :(

Can anyone say for sure, that if I purchased the EW-EN100 Juntion A 2xPort device, that I could then use STunlocker to derestrict?

If this would work, it looks like the cheapest option?
 

Coopers

New Member
Dec 31, 2019
15
9
Australia
OK. So for anyone interested, this does work.

However, it required firmware updates to various components on the bike before it worked. Luckily for me I bought the EW-EN100 from the bike shop and they were able to plug it into their PC and get everything updated etc.

I was then able to connect e-tube, and subsequently Stunlocker. Just waiting from my Stunlocker licence to change some settings.
 

MassDeduction

New Member
Dec 1, 2019
49
25
Victoria, BC
OK. So for anyone interested, this does work.

However, it required firmware updates to various components on the bike before it worked. Luckily for me I bought the EW-EN100 from the bike shop and they were able to plug it into their PC and get everything updated etc.

I was then able to connect e-tube, and subsequently Stunlocker. Just waiting from my Stunlocker licence to change some settings.

Cool set up. Good to know that it works. If it works on other motors, I might give that a try on a DU-E6100 setup with ST-Unlocker, as the SC-E6010 is my favourite screen (estimated battery percentage rather than "bars"). Time to do some research.
 

stuart_75

Member
Apr 12, 2023
7
3
UK
Bumping this thread as I have a similar issue.

Just got an Orbea Urrun that has the EP8-RS motor and a SC-E5003 display, so no bluetooth. Is the cheapest way to do a region change buy a SC-EM800 display?
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

536K
Messages
26,779
Members
Join Our Community

Latest articles


Top