Crestline Bikes

[E Bob]

it's 12mm for -5, could be 10mm for +5 as your raising the bike slightly when it moves forward, i set up 25% rider sag both ends & For me on fast, flat, mild steep it noticibly lost front end grip, even bike park steep it wasn't as planted. BUT... This is just my experience... i'm not one for geeking on measurements but i knew the bike had lost grip over that 2 Deg, Nothing stopping you trying both set ups, easy enough to knock out/in

 

[RoJo]

That is pretty sweet "mess" in the background by the way. I'm not sure that adding 15mm slackens by 2 deg, the maths just doesn't stack up (if you excuse the pun). I reckon about 0.4deg per 10mm of fork length.
This was calculated for my Firebird 29:

Pivot

Head Angle

Axle to Crown

zCrown

xFront Centre

Wheelbase

Rear Axle to Crown

aAxle to Crown

aWheelBase to Rear Axle to Crown

Reach

Stack

CS

BBDrop

lRAD

aRAD

170mm Fox36

65​

582​

527.4711​

245.9638​

1217​

1105.051​

86.489​

28.511​

455​

612​

431​

29​

762.6067​

53.37052​

+17mm Cup

64.27893​

599​

539.6496​

259.9603​

1224.281​

1105.051​

86.489​

29.23207​

447.2621​

617.6776​

430.9659​

23.57599​

762.6067​

54.09159 ​

 

[E Bob]

i'v honestly not got a clue re all the numbers, Alls i know is after -5 install the bike felt high and lost grip at speed in the front, This led me to check the HA, it measured 61,62 with -5 cup, 63,64 without. But Forget all the Numbers the Main thing is The bike Steers well. Holds a line when its rough. Attached is her sat high on the cup...

 

[RoJo]

Crestline old vs new geom numbers would suggest that the difference isn't that much:
RS 75 SRAM – CX RACE (SOLD OUT) – Crestline Bikes (63.5deg)
RS 180 Special Team Edition – Crestline Bikes (63.1deg)
Can't argue with Pythagoras (because he's dead )

Did you drop the bar height to compensate or had you run out of spacers to remove?

 

[E Bob]

i removed the -5 and went back to standard, For me this works well

 

[eTrax]

I would like to go +.5 HTA, it will slightly lengthen reach. i would like to be in the ~64.2-5 range.

 

[Alejandro]

RS 180 frame!

Pellejo on Instagram: "Hola Pellejers!! Hoy hemos tenido una unidad especial, una Crestline. Una E-Bike con unos acabados que llaman la atención. Esperamos un montaje a la altura de semejante 🥒!! Disfruta Alejandro!! @hexis_espana @hexisgraphics @b

30 likes, 2 comments - pellejo_ptmApril 19, 2024 on : "Hola Pellejers!! Hoy hemos tenido una unidad especial, una Crestline. Una E-Bike con unos acabados que llaman la atención. Esperamos un ...".

www.instagram.com

 

[Onetime]

They should make a 200/200 frame With the Bosch race motor!

 

[GeorgesEBike]

Can't wait to build up my new Crestline RS 180! Going with Ohlins air suspension, SRAM GX AXS Transmission drivetrain, SRAM AXS dropper post, Hayes Dominion A4 brake/rotors, NOBL wheels, Onyx Classic hubs, One Up bar, stem and pedals. Hoping to have it completed in the next 2 weeks.

 

[Plummet]

Well if the voima ever dies this RS 180 will be on the top of my list. It hits all the geo numbers I like.

The only spec I don't like is the over leveraged shock at 2.77.

 

[Robstyle]

Can't wait to build up my new Crestline RS 180! Going with Ohlins air suspension, SRAM GX AXS Transmission drivetrain, SRAM AXS dropper post, Hayes Dominion A4 brake/rotors, NOBL wheels, Onyx Classic hubs, One Up bar, stem and pedals. Hoping to have it completed in the next 2 weeks.

View attachment 138920

Solid build George. Ohlins will look great with that colour scheme too

 

[Redders473]

Evening guys and gals my names Darren and i represent CRESTLINE BIKES i will be racing the UK national series and other races so if you see me come say hello. If anyone in the UK is interested in the next batch of RS180s and would like to know more and talking through how the process and how troydon will save you some cash on import and VAT give me a shout. On here or instagram, @Darren.redfern

Cheers

 

[RoJo]

Evening guys and gals my names Darren and i represent CRESTLINE BIKES i will be racing the UK national series and other races so if you see me come say hello. If anyone in the UK is interested in the next batch of RS180s and would like to know more and talking through how the process and how troydon will save you some cash on import and VAT give me a shout. On here or instagram, @Darren.redfern

Cheers

Already got one... best bike in the world. Where are your local riding spots Darren?

 

[Posvar1]

Evening guys and gals my names Darren and i represent CRESTLINE BIKES i will be racing the UK national series and other races so if you see me come say hello. If anyone in the UK is interested in the next batch of RS180s and would like to know more and talking through how the process and how troydon will save you some cash on import and VAT give me a shout. On here or instagram, @Darren.redfern

Cheers

Yo Darren! I already follow you on IG. Stoked that you are on the team. I’m about 15 months into my Crestline and it’s best bike I’ve ever had. Good luck in 2024.

 

[Redders473]

Already got one... best bike in the world. Where are your local riding spots Darren?

I live near Leeds so wharney dalby Guisborough, hamsterly all over really

 

[Arethustra]

Can't wait to build up my new Crestline RS 180! Going with Ohlins air suspension, SRAM GX AXS Transmission drivetrain, SRAM AXS dropper post, Hayes Dominion A4 brake/rotors, NOBL wheels, Onyx Classic hubs, One Up bar, stem and pedals. Hoping to have it completed in the next 2 weeks.

View attachment 138920

Sadly, my RS180 arrived 2-weeks ago and hasn’t been out of the box yet as I’m still waiting on I9 to build a EN350 wheelset that seemed like a good idea after a few scotch’s…hopefully the color choices/lacing pattern for the spokes doesn’t end up looking silly

Rest of the parts are in and I can’t wait to get this thing built! Current build list includes:

Zeb 180mm & Super Double Deluxe Ultimate in the Rear
Maven Silver with 200mm discs
XO Transmission
Reverb Post
Yoshi ENDH Stem & Pedals
e13 Cranks and Chainring

Hopefully it’s only another week for the wheelset…

 

[Arethustra]

Can't wait to build up my new Crestline RS 180! Going with Ohlins air suspension, SRAM GX AXS Transmission drivetrain, SRAM AXS dropper post, Hayes Dominion A4 brake/rotors, NOBL wheels, Onyx Classic hubs, One Up bar, stem and pedals. Hoping to have it completed in the next 2 weeks.

View attachment 138920

Did your frameset come with a UDH?

 

[GeorgesEBike]

Did your frameset come with a UDH?

No, it did not include a UDH. You don't need one with the XO Transmission.

 

[Arethustra]

No, it did not include a UDH. You don't need one with the XO Transmission.

Thanks, my box had a hole in the bottom and I wanted be sure that nothing had escaped as the render showed a UDH.

In retrospect, yeah it was kind of a pointless question since I don’t need it.

 

[Gnarly Bailout]

I made a NBD post on a different forum yesterday, and a commenter said "the bike looks heavy", so I thought I'd give a first ride impression. (Before you ask, I measured it at 53.7lbs/24.4kg with pedals). For a full powered, long travel (180mm) ebike, my first ride impression is 1). WOW! and 2) This thing feels surprisingly lively and playful. It did not feel heavy to me at all. Probably no surprise to any of you on this Crestline Forum.