I found the app to be a bit flaky on the version of bluetooth used at both ends. If you have a version 3 245 then maybe use a different phone with a newer ANdroid and hence newer bluetooth. But is must be 5.0 or later.
SZZS specific CEF50-main thread (initial builds and troubleshooting related only)
- Thread starter TCFlowClyde
- Start date
92se-r
New Member
Yah it is a 245 ver 3. My phone is a s22 with bt 5.2. Ill play around a bit more. Appreciate the help.
sandnap
New Member
I have a pixel 6 with android 14 and Bluetooth 5.2 and have the same "operation failed" issue. Others have reported it as well. Hopefully Bafang fixes the issue soon.
@sandnap I see you are in herriman? Im just north of SLC by lagoon. You have a CEF50 as well?
sandnap
New Member
Cool! I have an LCE930 that I just finished building. I am patiently waiting for the trails to dry out so that I can ride it.
Maybe it's the version of Go+ app itself.
The latest version is v2.2.0 Nov 2023. I suspect this is the version causing problems.
Maybe try previous versions 2.1.0 or 2.0.1
2.1.0 worked for me many months ago.
Thanks bro , it work for me now. I uninstall my V2.2 and install V2.1 . Can change the setting now.
92se-r
New Member
Where did you get the old version?
I installed on my s22 from the link below
92se-r
New Member
Good lord the popups and spam. I cant even get to download it
I download and upload to my google drive below, also linda just send me new Update 48V firmware
Bafang – Google Drive
Last edited:
Thanks. very strange, the 4812 file i had, have not the same size than your ? mine in attached file, If an "geeks" want to see what is the differences
92se-r
New Member
Thanks! Did you try the new firmware?
Bro the file name or verison are different so size should be different.
Not yet try bro.... Need to find my laptop. Lazy to look for it.
TCFlowClyde
Active member
- Thread starter
- #3,676
Close enough to fit my 3-pin charger plug? Replacing my dust cover for the 720Wh factory battery.
Possible replacement.
The dust cover looks more stout and then just splice wires to battery connector...
OEM
FYI: I finally got Linda to physically disassemble the charging port to convince her that the dust cover was actually separate and therefore replaceable. Also that the covers likely could be sourced from their battery maker providing the charge port...(sorry frustrating but after 6 weeks of trying to communicate this to her, too close to the New Year's to inquire I guess?
).
Possible replacement.
OEM
FYI: I finally got Linda to physically disassemble the charging port to convince her that the dust cover was actually separate and therefore replaceable. Also that the covers likely could be sourced from their battery maker providing the charge port...(sorry frustrating but after 6 weeks of trying to communicate this to her, too close to the New Year's to inquire I guess?
).
Last edited:
TCFlowClyde
Active member
- Thread starter
- #3,677
Here's my charging plug 3 pin male.
Here's the 3-pin female replacement port. Is it close enough to fit? Any electrical engineers care to weigh in? (I don't know if the matching charger is 42 V/2.0 A for the replacement if needed. I'll try to find out if necessary.)
Here's the 3-pin female replacement port.
Is it close enough to fit? Any electrical engineers care to weigh in? (I don't know if the matching charger is 42 V/2.0 A for the replacement if needed. I'll try to find out if necessary.)
Neeko DeVinchi
E*POWAH Elite World Champion
This is honestly, the best power hour emtb
TCFlowClyde
Active member
- Thread starter
- #3,679
@mike_kelly any thoughts? Just buy it and see if it works?Here's my charging plug 3 pin male.
View attachment 135148
Here's the 3-pin female replacement port.
View attachment 135147
Last edited:
Regular_Michael
New Member
I think I'm going to pull the trigger on a CEF50. I want to know from a size perspective what folks have chosen. I'm a regular 186cm tall dude - 85kg. Whenever I check sizing charts I seem to fall between a L and a XL.
I currently ride a Rocky Mountain XL (This will be my donor bike) - it rides well although it can be a challenge to throw around.
The team at CEF50 suggested an XL - I'm keen to get some opinions from current CEF50 owners on this.
Cheers
Mike
I currently ride a Rocky Mountain XL (This will be my donor bike) - it rides well although it can be a challenge to throw around.
The team at CEF50 suggested an XL - I'm keen to get some opinions from current CEF50 owners on this.
Cheers
Mike
Cef50 feel a little small when u ride so size UP will be a good choice.
TCFlowClyde
Active member
- Thread starter
- #3,682
1/2 size small to me. Next time probably XL (long torso shorter inseam) but the dropper slams for lower standover height.
Myalteregohamish
Active member
I’m about the same height as you and I have the XL. I run it with a mullet and I can throw that around all day.
The problem I see is that the plug I got and the one you originally got have a diamond shaped opening with two screw lugs that are glassed into the frame. Your new candidate is designed for a round opening, If you were doing this from scratch that might be fine but not when it is already cut-out for the diamond shape. The next problem with your candidate is that it appears to be designed for an installation that needs a thick "spacing" between where the nut screws on and where the outer surface contacts the frame.@mike_kelly any thoughts? Just buy it and see if it works?
TCFlowClyde
Active member
- Thread starter
- #3,685
Ok thanks. I'll explore your custom charging plug that you rigged for your battery extenders next.
It has turned out to be a good plug but it does stick out a lot and if you have narrow q cranks they could hit.Ok thanks. I'll explore your custom charging plug that you rigged for your battery extenders next.
I forgot you are just using it for charging so it does not matter. It does have a nice screw-on cap.
TCFlowClyde
Active member
- Thread starter
- #3,687
Got a pic handy...forgot what it looks like.
Guys, regarding charger port, I'm thinking of building an extender for the summer but I was thinking of using a magnetic charging plug, there are tons on Aliexpress, some with a nice 90° angle and low profile. Have you tried this ? Also, not sure about Bafang default charger, there might be more than 2 wires, but you can find 3/4/5 pins connectors
22mm i can not install, i need to sand it to 20mm
Similar threads
EMTB Forums
Latest articles
-
The new 2025 Orbea Rise - my wish come true?
A few months ago, I wrote an article about a great bike that didn’t...- Knut Nes
- 5 min read
- Views: 11K
- Reaction score: 7
- Comments: 21
-
The lightweight Canyon Neuron:ONfly CF is here!
Finally, Canyon is out with their first mid-assist, lightweight emtb...- Knut Nes
- 6 min read
- Views: 5K
- Reaction score: 5
- Comments: 5