Velduro Rogue 170/165 mullet Enduro with DJI

Velduro UK said:
Update

The current Chain stay length is 440 with a tolerance of +- 1mm see below. We are flying in the 450 rear triangles to arrive in UK on May 10th they will be free issued to anyone who has ordered an XL bike or frame and to anyone else through our website. Please allow 10 days for customs and UK internal delivery.
Chain ring bash guards are available now at £15.00 plus PnP from [email protected]
Below is a CnC'd version of the linkage, Rob has one and there is just one more available in the UK. Currently we are not stocking them. They are exactly the same in all dimensions as the black Version.
Current frames are certified to cat 4. We are awaiting the final 5 categorisation testing in Germany, this could take time. Current frames must be considered Cat 4 until we officially announce the Cat 5 certification.
Click to expand...
Any formal Veduro update on 700WH slim battery support with the Rogue? Can it be adapted to the M2S-equipped frames enroute, like with the Crestline? Or is a new frame version in order?
 
⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
I was able to test my Intend Hover Monocoque 205x65mm in a size Large frame. Full bottom-out was about 4–5 mm clearance to the rubber charger port cover. But it was just a quick test in a different bike shop. I'll test it again in my Large frame.
 
There is no way. I just got my Avinox light cable. I just checked the pinout. If I’m right, it’s the exact opposite of the SRAM one. Is that correct? See photos. Or is the red output the recessed part? Then it would be correct.

1776369302905.webp

That’s the light cable. The red circles are the ones that are connected to the wires.

1776369382148.webp

That’s the SRAM spec sheet.
 
Last edited:
GeordieDownSouth said:
They are not for sale to the public at this point as they are all going into the new bikes, absolute pain in the arse for all the people who were advised to buy the Higo….
Click to expand...
and forbidden is giving them to their customers with eagle 70/90 deraileurs...
 
nathan_dh said:
There is no way. I just got my Avinox light cable. I just checked the pinout. If I’m right, it’s the exact opposite of the SRAM one. Is that correct? See photos.

View attachment 182076
That’s the light cable. The red circles are the ones that are connected to the wires.

View attachment 182077
That’s the SRAM spec sheet.
Click to expand...
-.-

have you tested them with a voltage tester?
 
nathan_dh said:
Yeah, the ones in my picture with the red circle have continuity with the wires in the cable.
Click to expand...
ffs, i think i just order some axs batteries too. i have two of these light cables on order and two of the micro a axs cables already here
 
sethimus said:
ffs, i think i just order some axs batteries too. i have two of these light cables on order and two of the micro a axs cables already here
Click to expand...
I think it could be correct, but I’m not sure about the SRAM drawing. What is the recessed part and which one isn’t?
 
sethimus said:
have you also ordred this one?

View attachment 182078
www.ebike24.com

DJI Avinox Light Cable 500 mm | eBike24

DJI Avinox light cable | up to 30 W | Retrofit e-bike lighting for various brands | Only for e-bikes with DJI Avinox motor ✓ Buy now!
www.ebike24.com www.ebike24.com
Click to expand...
Oh nice, this one has all 4 wires. You’re good. Mine has only 2 wires. It’s the Supernova adapter cable for their lights.
supernova-lights.com

AVINOX/DJI Frontlicht Anschlusskabel

Anschlusskabel für AVINOX/DJI Antriebe. • Einfache Installation durch Steckanschluss, PVC frei• Kabellänge: 400 mm ANLEITUNG
supernova-lights.com supernova-lights.com
 
DMR Dave said:
Could this be used/adapted to run other lights? I’ve got a big power magic shine 8000 and it would be nice not to have to strap its battery to the frame!
Click to expand...
Yes, but I’m not sure what the watt limit for the output is. But most likely you’re good. Its 12v
 
sethimus said:
no, i spoke with the distributor. a bit over a week ago the ship was around namibia. so takes 2-3 weeks to rotterdam. then it needs to get unloaded and shipped to switzerland. they booked both a lorry and a spot on a train, but it is not clear when exactly they get it. sucks big times, i‘ll leave on the 26th to finale and probably need to rebuild my kenevo sl for this trip. and ride the shitty 23 x2 it came with.

my proper shock no longer fits, it just arrived from the tuner:
i have now a one of a kind fenix 2.0 with the last available side by side res
Click to expand...

I’m guessing you have no update on your frame delivery? Im on the same Batch.

I have to bring my Hover Shock to Intend before I can fit it to the new frame. But then I can’t ride it on my current e-bike after the changes, which sucks if I do it too early. But if the frame arrives sooner than expected, I’m stuck with no shock.
 
nathan_dh said:
I’m guessing you have no update on your frame delivery? Im on the same Batch.

I have to bring my Hover Shock to Intend before I can fit it to the new frame. But then I can’t ride it on my current e-bike after the changes, which sucks if I do it too early. But if the frame arrives sooner than expected, I’m stuck with no shock.
Click to expand...
I tried to mount the Hover opt and it’s not working in the frame M. The pigi back slamed to the charging port.
On what size frame you’ll mount it?
 
ChrisCH83 said:
I tried to mount the Hover opt and it’s not working in the frame M. The pigi back slamed to the charging port.
On what size frame you’ll mount it?
Click to expand...

I orderd a size large. Yeah its worse with the Opt.
If you’re 100% sure you would order the Hover Monocoque, I could maybe test it on a size medium for you, with 205×65mm or 205x60mm.
I tested it with my Moto V2 (aka Rover). But the Body is the same as the Hover Monocoque
 
nathan_dh said:
I’m guessing you have no update on your frame delivery? Im on the same Batch.

I have to bring my Hover Shock to Intend before I can fit it to the new frame. But then I can’t ride it on my current e-bike after the changes, which sucks if I do it too early. But if the frame arrives sooner than expected, I’m stuck with no shock.
Click to expand...
talked again today, they expecting them thurday/friday next week. not much longer :eek:
 
cozzy said:
You haven't read the manual have you 😉. That hole is for a 600 battery.
Did you get yours from ace with the e-storia bundle?
Click to expand...
I have - I now recall that! I’m sure my battery in loose, it it will be out soon for cable/hose routing so will sort then.

No jtech for the shock.
 
nathan_dh said:
I orderd a size large. Yeah its worse with the Opt.
If you’re 100% sure you would order the Hover Monocoque, I could maybe test it on a size medium for you, with 205×65mm or 205x60mm.
I tested it with my Moto V2 (aka Rover). But the Body is the same as the Hover Monocoque
Click to expand...
If you have the possibility that would be great. thx :D
 
sethimus said:
isn’t the 800wh mounted with a screw from the top under the display or do i mix it up with the crestline?
Click to expand...
Yep. Thats the one. Silly design really. The trek tq set up is way better. There is a bit of a technique to it and once you get that you're away. Do the bottom bolt up first then the top, helps locate it. Near impossible doing it the other way. Trust me 😆
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    668K
    Messages
    40,741
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top