The Official BLEvo Thread

Status
Not open for further replies.
@PaoloBLEvo,
I bought the app a while ago, but I don't see a user guide and an easy step by step guide with explaination of what the parameters mean would be great. Can you add one we can download or open a thread on here with instructions you can update when the app is updated?

could you also create some useful user setting defaults like they have in mission control?
 
⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
@PaoloBLEvo this is what I get when I try to share to Strava:

636256FC-A823-4D15-9E51-A1C7D6C48956.png
 
PaoloBLEvo said:
Sorry, but I don't understand your question..
Click to expand...

@Rob Hancill there should be a nnn.GPX attachment (mine appears right at the bottom of the email sent from BLEvo) which you save locally and then upload to Strava. I use an x too and it works for me...

EDIT: Just seen your further post...

My process is to hit the "send GPX" (which composes an email with all the textual data AND the GPX attachment) and then save to the computer and upload to Strava from there.... (you can actually do it all from the phone if you save the GPX from the email to cloud storage and then upload to strava from the same place)
 
Last edited:
Stumpy said:
@Rob Hancill there should be a nnn.GPX attachment (mine appears right at the bottom of the email sent from BLEvo) which you save locally and then upload to Strava. I use an x too and it works for me...

EDIT: Just seen your further post...

My process is to hit the "send GPX" (which composes an email with all the textual data AND the GPX attachment) and then save to the computer and upload to Strave from there.... (you can actually do it all from the phone if you save the GPX from the email to cloud storage and then upload to strava from the same place)
Click to expand...
Perfect, thanks mate. Sorted (y)
 
Stumpy said:
@Rob Hancill there should be a nnn.GPX attachment (mine appears right at the bottom of the email sent from BLEvo) which you save locally and then upload to Strava. I use an x too and it works for me...

EDIT: Just seen your further post...

My process is to hit the "send GPX" (which composes an email with all the textual data AND the GPX attachment) and then save to the computer and upload to Strave from there.... (you can actually do it all from the phone if you save the GPX from the email to cloud storage and then upload to strava from the same place)
Click to expand...
It is better to use the tcx file, because in this file there is also the biker power, not present in the gpx file..
 
I've just released the new version for Android 2.21.6.
Here are the news:

- Added the chart also on the Bike monitor page
- Increased acceptance of GPS accuracy to 40 meters
- Added color if the phone's battery is under 20%
- Entered bluetooth activation request
- Restored the autonomy of the difference in level
- Added minimum, maximum and average temperature of the battery and the motor
- Bugfix color assistance level after disconnection
- Bugfix in the identification of the Smart Power configuration name


Download the update from the Google Play

https://play.google.com/store/apps/details?id=com.dopa.android.blevo&hl=it

Let me know if you will found any issue.
Thanks.
Paolo
 
PaoloBLEvo said:
I've just released the new version for Android 2.21.6.
Here are the news:

- Added the chart also on the Bike monitor page
- Increased acceptance of GPS accuracy to 40 meters
- Added color if the phone's battery is under 20%
- Entered bluetooth activation request
- Restored the autonomy of the difference in level
- Added minimum, maximum and average temperature of the battery and the motor
- Bugfix color assistance level after disconnection
- Bugfix in the identification of the Smart Power configuration name


Download the update from the Google Play

https://play.google.com/store/apps/details?id=com.dopa.android.blevo&hl=it

Let me know if you will found any issue.
Thanks.
Paolo
Click to expand...

Can’t wait to get the iOS version ?
 
Noticed on my ride with BLEvo that often in spotty GPS reception sections the speed does not display. But in Mission Control its always available. Can you perhaps use the last known value in the last x amount of time or calculate from wheel speed perhaps so we can just look down and see relatively accurate measurement?
 
VaseLEVO said:
Noticed on my ride with BLEvo that often in spotty GPS reception sections the speed does not display. But in Mission Control its always available. Can you perhaps use the last known value in the last x amount of time or calculate from wheel speed perhaps so we can just look down and see relatively accurate measurement?
Click to expand...
Are you talking about iOS or Android version?
 
PaoloBLEvo said:
Do you mean that the Speed is not shown correctly in the bike monitor? Sorry, but I don't understand the issue..
Click to expand...
It show zero ( 0 ) mph. While mission control is showing 12 mph for example. It seems the GPS reception is the issue because I noticed GPS was showing red. Then it gets reception and suddenly speed shows. Mind you at same time your cycling speed rpm is showing, so my question is if you are relying on GPS, and it is spotty, can you instead use the rpms to calculate the speed then sample the GPS when it is available? It may have been coincidence, but that was my immediate conclusion. Has no one else noticed this, or is there a sensitivity setting I can adjust so it samples maybe a little less frequently so speed always shows?
 
There is an issue with GPS on IOS(or iPhones) i think. My iPhone 8 did the same all the time, i bought old Sony Experia to do the job. No issues with Android.
Android version is better in every aspect in my opinion.
 
VaseLEVO said:
It show zero ( 0 ) mph. While mission control is showing 12 mph for example. It seems the GPS reception is the issue because I noticed GPS was showing red. Then it gets reception and suddenly speed shows. Mind you at same time your cycling speed rpm is showing, so my question is if you are relying on GPS, and it is spotty, can you instead use the rpms to calculate the speed then sample the GPS when it is available? It may have been coincidence, but that was my immediate conclusion. Has no one else noticed this, or is there a sensitivity setting I can adjust so it samples maybe a little less frequently so speed always shows?
Click to expand...
Could you try to use the data coming from the bike and not from the GPS? There is a configuration for this...
 
brilleaux said:
There is an issue with GPS on IOS(or iPhones) i think. My iPhone 8 did the same all the time, i bought old Sony Experia to do the job. No issues with Android.
Android version is better in every aspect in my opinion.
Click to expand...
What is the issue in the GPX?
I will check tonight...
 
brilleaux said:
That what @VaseLEVO said:
"It seems the GPS reception is the issue because I noticed GPS was showing red. Then it gets reception and suddenly speed shows."
Click to expand...
Sorry.. I read GPX and not GPS..
In the next release I will review the GPS accuracy..
 
Can some one tell me. Do you need to be conected to your mobile for the sipped limiter to be removed or do you just have to deactivate it once and it's off all of the time.
 
Grasshopperaggy said:
Can some one tell me. Do you need to be conected to your mobile for the sipped limiter to be removed or do you just have to deactivate it once and it's off all of the time.
Click to expand...
Just activate once and it remain without smartphone connected..
 
VaseLEVO said:
@PaoloBLEvo,
I bought the app a while ago, but I don't see a user guide and an easy step by step guide with explaination of what the parameters mean would be great. Can you add one we can download or open a thread on here with instructions you can update when the app is updated?

could you also create some useful user setting defaults like they have in mission control?
Click to expand...

Google Blevo Guide and it will point you in the right direction (y)
 
JonasH said:
HAHAHA, i wish :D
But no rumors regarding blocking of third party apps?
Click to expand...
I asked to Specialized, but I didn't received any answer...
We will test when the bikes will be available...
Some rumors say that there will be a new App to handle the new bike, but I think (and I hope) is a fake rumor... But we will see...
May be Specialized takes so many time to release the new version of Mission Control due to adding the handling of new bike.. But I don't know... these are only suppositions...
 
I think something is coming called flex mode which from what i have been told is like Blevo smart control
 
Status
Not open for further replies.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    669K
    Messages
    40,827
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top