deertrackdoctor
Active member
One up V2 240 fits with approx 20mm gap so not quite slammed down
Cube one77 2025
- Thread starter Rando_12345
- Start date
deertrackdoctor
Active member
Run then for two years on a trek rail without any issues so I see no reason why they won't work outm9n the cube
deertrackdoctor
Active member
Fucking hell that's proper catastrophic!
deertrackdoctor
Active member
It's came with SRAM XO wireless which I immediately removed and replaced with Shimano linkglide XT
It takes the piss that we have to buy an extra bit. Why isn't it in the box with the display? Many people will be upgrading their System Controller on the top tube for the Kiox 400c.
For anyone wanting. Not due till October tho.
Last edited:
There is no 440c it’s the 300/500/400
Typo
Raptor
Active member
Sorry mate I was meaning the whole bike
Because every bike manufacture has their own solution/design for integrating it into the top tube. It's not on Bosch to produce whatever extras required to mount it.
Good point. I was caught up in the ONE77ness of it all.
deertrackdoctor
Active member
Ah yes sold it to a riding buddy who's a vets happy man
#rideshimano
I found the front shock setting to be important. I was having pedal strikes and found the bike to be almost unrideable on uphill technical single track with the rear shock setting closer to 30 than less than 20 mm sag. I now keep it <= 20mm
Interestingly the Fox Manual recommend a lower than average setting if you have the Fox 38 Rhythm grip, as follows:
Fox 38 Rhythm is designed around 15-20% sag
No but you can work it out. Essentially wrap the chain around the largest gear and the chain ring. Connect them together and in your case add 6/7 extra links. That should allow you to do what you need to. Start with the above at 7 and then remove one additional link if need be.
How to determine the correct chain length | How to shorten SHIMANO bicycle chains correctly
The basics of SHIMANO chains How to measure chain wear, determine the correct length and maintain your chain
mtb.shimano.com
If anyone is curious. This is what the Kiox 400c looks like in situ without the adaptor plate. My theelectricbikeshop will have the adaptor plate in stock in a week or two, so will fit and update here.
Apparently I am one of the first to get the display (from their shop in Cardiff) and very hard to get hold of at the mo.
Apparently I am one of the first to get the display (from their shop in Cardiff) and very hard to get hold of at the mo.
I got my display the other day. Just waiting on mtb monster to send me the bracket in next 2 weeks. Does look smart with the screen but it should have been like the Santa Cruz where no bracket is needed.
100%. They knew about it, like Santa Cruz, but didn't make the hole the correct size ready to retrofit the display. Disappointing. We'll possibly be the first two to get them on!
Fitted. 150mm (With Acid for comparison)
I just need the weather to clear before a test run. Could be a while mind in S. wales. My Kiox 400c adapter might arrive by then too. LOL.
Hi! I’ve been following this post for a while and finally decided to buy my One77 SLX 2025. Once I receive it and make the first mods, I’ll share them here.
I have a question about the Kiox 400c display: is it plug & play? Any experiences? On the Ridewill website they told me that the kit can ONLY be activated through Bosch dealer diagnostics.
I have a question about the Kiox 400c display: is it plug & play? Any experiences? On the Ridewill website they told me that the kit can ONLY be activated through Bosch dealer diagnostics.
Great choice the SLX is a great bike.
RE the Kiox 400c: You'll need the Flow app to get the bike into pairing mode. I didn't go through the whole process as I need to use the stock System Controller until I get the screen adapter.
If were you, I would look at pre-ordering the adapter sap so you're not waiting. Apparently they are in short supply.
For me it's about being able to see the info I want without having to stop and get my phone out of bag. Getting a quick reference on the move.
I also didn't have the Purion or any other display with the bike.
Last edited:
Raptor
Active member
If I didn't already have my purion I would be fitting the kiox so I'm happy to stick with the purion. I also use a garmin for maps which suits me fine. The purion on the bars is at the right position too.
Rando_12345
E*POWAH Master
- Thread starter
- #835
I just want battery percentage.
Ordered the full kit from bike24: https://www.bike24.com/p2957611.htm...serToken=3abbd3a2-7731-437f-828e-bb18742a2e41
I'm not sure I'll even use the navigation.
deertrackdoctor
Active member
It's absolutely piss poor of you ride anywhere remotely remote !
compared to even the most basic of garmin device with turn by turn directions
The most Basic gen2 Garmin instinct is cheaper ,more reliable ,more accurate and more user friendly
It uses the Flow app, but you can import a gpx file from some other app.
Similar Threads
-
Cube Stereo Hybrid One77 AT fork/shock setup for pop and grip- Started by Razzy_82
- Replies: 3
-
-
-
Cube Stereo Hybrid ONE77 HPC 2025 — revisión recomendada al sacarla nueva?- Started by Ibiza12
- Replies: 4
-