Torque setting for EP8 Motor bolts on a 2022 Canyon Spectral ON

[Tone_Loc66]

Hello All, tired looking through the threads but I could not find the Torque settings. One of the motor bolts came loose. I just need to torque it to the correct spec.

Thanks in adavance.

 

[Narfel]

I can't give you an exact number, but I loosened a bolt with a torque wrench and it was pretty much bang on 20nm if that helps. The surrounding bolts of main pivot and such have similar torque values printed on them so I'd think its safe to assume 20nm. It is overengineered quite a bit anyway so I wouldn't worry too much about it coming loose, given the way it is snuggly wedged in the frame.. I think too much torque would just make it harder to loosen should you need to. But again, that is not official nor from support.

 

[Myalteregohamish]

Two of mine came loose, started making the loudest creaking sound. Lost one of the bolts before figuring out what happened. The bolts didn't have any lock tight on them. I would have assumed there should be. Retighten the whole thing to around 20-30Nm no more creaking.