Yes. Be nice to have a sweet Siryon integrated display upgrade in the future! Or just like the Trek Fuel Ex-e display (less tech but color) which is a simpler HUD, but nice when I test rode on demanding terrain...easy to see!
180 front and 170+ rear. Standard shock spec is 210 x 55, so only additional 8 mm stroke with the 216 x 63, at 2,6 ratio = 20,8 mm add. travel. The CC DB is equipped with a 450-550 lbs progressive spring - perfect matching the more linear suspension kinematics.BTW: Very nice E10!
180mm F/180mm R?
Smoking idea
The Siryon display is basically just an android phone stuffed in there. But at least with the hole in the frame you can run cables to anything else you may want to mount there.
Or even the simpler Fazua60/TQ50 blend-like system from a clever 3rd party seller. Basic LED colored lights integrated frame HUD already on the DP-171 paired with a very discreet tactile push button system...great thumb feel on Fuel Ex-e!!!
Only $45 USD for a nice wired remote switch...
The remote switch is not CAN, only analog on/off switches. I use various old BBS uart remote, just wiring modification needed to adapt to display DPC240/241. LAnton have allready explain thatOr hack somehow an existing Bafang discreet switcher button? I know it's a UART not CAN firmware, but some ingenuitive forum member here perhaps?
View attachment 104448 View attachment 104449 View attachment 104450
I believe LAnton was suggesting that the integrated display the DP-1711.CAN on the frame was a power on/off button only.
i speak about the C961 remote of your pics, About DPE170/171, i don't know, i never touched itI believe LAnton was suggesting that the integrated display the DP-1711.CAN on the frame was a power on/off button only.
It's that, and a 3-mode power selector combo. It's Bluetooth rather than a USB compatible. I just showed him that it's the fully independent HMI made for H700 hub ecity drive kit as pictured previously. So, Linda, the CEF50 salesperson is saying there mixing two separate HMI kits to somehow work together. l'm unsure that they are compatible.
It has no remote power mode selector unfortunately. Hence the suggestion of adapting an alternative like the UART switch from BBSHD set up.
You're suggesting the alternative DP-C961 UART remote is an analogue switch only and can easily be adapted to the DP-171.CAN display?
If so, awesome.
Ok. That was my point how to modify the C961.UART remote for the 171.CAN display?.
Does the 171 have a remote on handelbar wired to it ? if yes, i think that the remote alike all other HMI is just analogic on/off switches. Does it linked directely to the main wire to the motor alike all other HMI display, without any connector for an remote ? if yes, i don't think you can add additional remote control.Ok. That was my point how to modify the C961.UART remote for the 171.CAN display?.
You're suggesting that it's not a firmware problem, it's just cable connector compatibility issue?
If so great! But how? I'm no electrician or computer programmer.
The 171 doesn't have a remote handlebar hardwired power mode selector/onoff switch, so it's unlikely it could be wired in if the main motor wire is the only wire attachment...so I assume that but don't know yet honestly. We'll wait to see when the frames get shipped out.
We'll wait and trouble shoot this at a later date if needed.
Cool. If there was another wire connector, additional to motor wire on the 171...just splice in. Easy! It's analogue. No firmware issues. Got it!
i will be surprised if bafang don't allow possibility to have remote switch to easily change the mode without letting go the handlebarCool. If there was another wire connector, additional to motor wire on the 171...just splice in. Easy! It's analogue. No firmware issues. Got it!
But like we both speculate, the 171 has only a motor wire connector....so no way to hardwire it.
We'll see...I hope
Looks like we'll have to wait. I should've asked a few weeks ago. But, the Bafang-e.com website clearly shows no handlebar mount remote switch for the DP-171.CAN like it does for all other models...so observation suggests only the motor wire unfortunately.We'll see...I hope
Be nice if you're right!
It's hard too tell from pic below. I'll ask Linda for another angle of the DP-171.CAN. But, she may already be on holiday.
View attachment 104482
It looks like Bafang HMI lineup will show a display and wired remote if one exists. So none for the 171.
Yes
. The 171 is a separate, independent system for the H700 hub system. Engineers for the CEF50 are incorrectly mixing two separate systems.
Yes weird.
Unkownable until physical inspection. 
I'll paint myself...get the frame faster. But if past experience dictates, they'll likely do it for a nominal extra fee $50-75 USD? But you'll have to confirm with them.
