Reign E+ 2022

⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
Mine has arrived from Canada (E+0) so now all I have to do is locate a battery. I have contacted several Dealerships non of which have any in stock (no surprise there). So if anyone has a spare kicking about please get in touch (UK based). In the meantime I plan on doing a lot of pushing!
 
zorro77 said:
hi guys, I'm arguing with the Fox Factory 38 of E + 0 I can't find a good setup, my hands and arms hurt, it's hard, Do you have any advice on a good set-up? weight 90kg with backpack and clothing
I hope it doesn't have any problems, you don't even hear the clicks of the low speed compression when turning the knob
Click to expand...
I asked this earlier but haven’t had a reply yet. I’ve found that opening both high and low compression up really helped. Also adding a bit more air than recommended to get the sag right. It seems to keep you higher in the stroke. Also have the low speed rebound quite quick for the smaller breaking bumps and roots etc but the high speed a bit slower for the bigger hits.
Because of the heavier weight of the bike it definitely needs different settings than the recommended ones on the fox site.
I’m running 98 psi with both hsc and lsc nearly fully open. One or two clicks definitely make a difference (I can’t feel the clicks on the lsc but apparently this is normal. If you really concentrate you can just feel something)
There’s a good video on YouTube by one of the Fox riders called Jeff Kendal-Weed.
 
Last edited:
So the first proper ride out today around peaslake, Surrey hills area. It was very very wet. I rode probably 80% of the ride one up from eco which I found was plenty. The rest I rode in either auto or full power. I would say ignore the estimated range when using the app.
C6EC9A6F-B574-4ECC-A17F-E38218F98987.png
AE3929C1-30B5-4541-B687-99D2E99C5E1A.jpeg
 
Not sure if US will have 750 batteries available, only reign e+2/3 available here. No +1 or +0. Good info all, thanks!
 
zorro77 said:
hi guys, I'm arguing with the Fox Factory 38 of E + 0 I can't find a good setup, my hands and arms hurt, it's hard, Do you have any advice on a good set-up? weight 90kg with backpack and clothing
I hope it doesn't have any problems, you don't even hear the clicks of the low speed compression when turning the knob
Click to expand...
Some of them need some additional loving, this might be your problem :

www.emtbforums.com

Fox 38 Harshness?

Back in the 90's and early 2000's I used to mostly run Fox forks and didn't particularly care for Rockshox. One day I bought an all-singing all-dancing 120mm fork with Fox's best damper at the time and no matter what I tried, the ride was harsh and travel I was getting out of the fork was...
www.emtbforums.com www.emtbforums.com
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    668K
    Messages
    40,758
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top