2024 Strive:ON

[Winryn]

Spoke too soon?

View attachment 137346 View attachment 137347 View attachment 137348

Mine had that with first 3-4 months of usage. After one of the sw updates it’s never occurred again

 

[Pazman]

You can try to reset the module ,it has a pin hole on the bottom you push a pin in.
Remove the battery cover and you will see the module ,just remove the screws and find the hole

 

[Wah]

Error 905007 just went away on its own. I think the module battery just needed time to recharge or something. I did contact canyon and they told me to bring it to a Bosch center for diagnosis, and warranty service but turns out I didn't need to.

 

[BiGJZ74]

I was seriously looking at the Strive On CFR LTD but found out through Canyon USA that you can't get a 750WH Battery in the US as an option and if I wanted it I'd have to order it through a Bosch Dealer. I ended up ordering a Wild. Strive looks like an amazing bike.

 

[Bandido]

Just an update on my chainring saga… i contacted canyon via the warranty process and submitted pictures of the frame damage and the picture of the chainring size my bike came with. They got back to me with an offer to buy back my bike and (and after a couple emails back and forth) rebuy any bike for 10% off and $150 worth of canyon swag. I did ask if sending just a rear triangle was possible but they do not have them in the US.

It was quite a hassle bc I had already installed brakes, fork, shock, tubeless stems and invisiframe. I uninstalled everything (except the wrap). Got the new bike the other day and repeated the process with RideWrap this time. Bike was absolutely fantastic yesterday on its first ride

View attachment 137322

I will say that, although it takes them 3-4 days for the warranty claim to get started, overall their customer service was responsive and I’m happy with the result.

I am looking for a rear mud guard and can't seem to find anything that's bolt on. Are you happy with the one you got?
Do you have a link to where I can buy the same?

 

[S1mmo]

I am looking for a rear mud guard and can't seem to find anything that's bolt on. Are you happy with the one you got?
Do you have a link to where I can buy the same?

I've got this one which looks very similar to the one in the post above.

RRP Proguard Rear Mudguard - 2023 | Merlin Cycles

Buy your RRP Proguard Rear Mudguard - 2023 at Merlin. Free worldwide delivery available on most items!

www.merlincycles.com

 

[S1mmo]

 

[Bandido]

Thanks! Looks tight though. Does it work well?

 

[Duke]

On my Strive

Rear / Front

Shit Flap made of two layers slapper tape back to back and mounted with a stripe 3m electric tape



On my Levo:
Rear but cuted and Front Fox stock long

 

[S1mmo]

Thanks! Looks tight though. Does it work well?

It's not tight and it works really well at keeping crap away from the bearings at the back of the bike.
It doesn't stop me getting a wet arse and back, I think a longer Mudhugger style guard is needed for that but they don't look too good and can hit the floor if you're moving your bike around on the back wheel.

 

[Wah]

I am looking for a rear mud guard and can't seem to find anything that's bolt on. Are you happy with the one you got?
Do you have a link to where I can buy the same?

sorry just saw this. Its a mucky nutz short guard. You have to make a small hole on the top to tie it to the seatstay brace, and trim away a small section so the chain doesn't rub, but the plastic is soft so its pretty easy. Fit is perfect and I like the way it looks.

 

[Bandido]

Thanks!

sorry just saw this. Its a mucky nutz short guard. You have to make a small hole on the top to tie it to the seatstay brace, and trim away a small section so the chain doesn't rub, but the plastic is soft so its pretty easy. Fit is perfect and I like the way it looks. View attachment 138739

Thanks!

 

[Bandido]

I just bought a new Bosch 625 battery as I wanted to have two and switch between them. It of course came without the spacer/adapter, latch and mounting kit. Does anyone have a list of all the parts needed to fit the battery to the Strive, and maybe links to where I can buy it?

 

[Pazman]

I just bought a new Bosch 625 battery as I wanted to have two and switch between them. It of course came without the spacer/adapter, latch and mounting kit. Does anyone have a list of all the parts needed to fit the battery to the Strive, and maybe links to where I can buy it?

If you call canyon they will create an invoice for you with all the parts needed , it will take a couple of weeks for them to sort it . cost was about £44

 

[Bandido]

Ok. Not possible to buy the parts from webshop? Aren't they made by Bosch?

 

[Pazman]

Ok. Not possible to buy the parts from webshop? Aren't they made by Bosch?

i think only dealer can buy from them .

 

[Bormio]

Looking to pull the trigger on a new Strive:On. Both The Underdog (5,049 €) and CFR (6,049 €) models are on sale. After looking at the specs am I missing something other than Deore vs XT and upgraded shocks? the question is, is the CFR worth the extra 1,000€?

Also, it looks like I'm between sizes of L/XL. I've always sized up to XL, but based on the numbers that doesn't feel like the right choice. My height is 191.5 cm and my inseam is 87 cm. If anyone with similar dimensions can chime in about what size frame they went with it would be much appreciated!

 

[jxrx]

Looking to pull the trigger on a new Strive:On. Both The Underdog (5,049 €) and CFR (6,049 €) models are on sale. After looking at the specs am I missing something other than Deore vs XT and upgraded shocks? the question is, is the CFR worth the extra 1,000€?

Also, it looks like I'm between sizes of L/XL. I've always sized up to XL, but based on the numbers that doesn't feel like the right choice. My height is 191.5 cm and my inseam is 87 cm. If anyone with similar dimensions can chime in about what size frame they went with it would be much appreciated!

Has been covered before but just quickly: better brakes (XT 4 piston), better fork (38 with Grip 2 damper and all the settings), X2 performance shock (up to you if worth it but technically better although only low speed comp/reb), better wheel set
For me deffo worth it and I'm really happy with it, would've cost me >1K to make the improvements afterwards
I'm 189cm and unsure of inseam but I went Large and it feels awesome, I know Rob is a bit taller than me and went Large too. That said I know some folks on the board, albeit not many, are around this height and went with XL.

I feel that an XL would be a little unwieldy on the tech trails that I like to ride in Swiss Alps

edit: oh also 6 bolt rotors as I hate centre lock rotors