Avinox SRAM AXS Motor power Cable (M1/M2 Variants)

👍
That's great.
Is the SRAM AXS cable an M1 Higo A ? Originally !
Thanks for the update
 
⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
IMG_8786.webp

Seems like a good option for splicing with a light cable.
 
 
Don't think Supernova ship to UK 🫤

eBike24 €200 minimum
www.ebike24.com

DJI Avinox Light Cable 500 mm | eBike24

DJI Avinox light cable | up to 30 W | Retrofit e-bike lighting for various brands | Only for e-bikes with DJI Avinox motor ✓ Buy now!
www.ebike24.com www.ebike24.com

Nanobike don't ship outside EU
nanobike.de

DJI Avinox Lichtkabel - Anschlusskabel - HIGO Z ⇒ jetzt kaufen!

DJI Avinox Lichtkabel - Anschlusskabel - – jetzt online bestellen ✓ Click & Collect in Berlin ✓ schnelle Lieferung ✓ Top Qualität bei nanobike.
nanobike.de nanobike.de

Contact about UK shipping !?
shop.e-bike-technologies.de

HIGO 4-Pin Cable 1000 mm – Z405MM – Blue – IP67 – 5.5 mm E-Bike Connector

HIGO 4-pin cable Z405MM with 1000 mm length and IP67 protection. Waterproof e-bike connector Ø 5.5 mm with gold-plated contacts for sensors and control lines.
shop.e-bike-technologies.de
 
Last edited:
Probably not the best option but has anyone considered hard wiring it to the motor? Could always resplice the connector back on if needed. Or even finding the proper pins so you don't need to buy two harnesses.
 
You could splice a different socket to the motor, say a Higo A ??
Dubious warranty support methinks !?
 
Yotaismygame said:
Probably not the best option but has anyone considered hard wiring it to the motor? Could always resplice the connector back on if needed. Or even finding the proper pins so you don't need to buy two harnesses.
Click to expand...
Yes, I was all set to do this, soldered & heatshrunk, possibly more reliable long-term and easier installation too. In my case I found a bosch cable and swaped the connector (M1 Higo-A)
 
Then I would think crimping pins and inserting them without having the new style connector would be an option.
 
Last edited:
sergiotudela said:
Any guide or video how to build it?
Click to expand...
Problem will be that different light cables require different connections. And different AXS power cables also use different colours and different polarity. So it's always going to come down to the user must verify the wire colours and polarity of both the SRAM AXS power cable and the Light Cable.

I have already made a post on how to verify the wire colours and polarity of the SRAM AXS power cable, and posted a picture.

When I have the M2S motor, I'll make the same post on how to verify the wire colours and polarity of the motor wires when you plug in the light cable and it's bare ends left free. Also with a photo.
 
Astro66 said:
Problem will be that different light cables require different connections. And different AXS power cables also use different colours and different polarity. So it's always going to come down to the user must verify the wire colours and polarity of both the SRAM AXS power cable and the Light Cable.

I have already made a post on how to verify the wire colours and polarity of the SRAM AXS power cable, and posted a picture.

When I have the M2S motor, I'll make the same post on how to verify the wire colours and polarity of the motor wires when you plug in the light cable and it's bare ends left free. Also with a photo.
Click to expand...
You just need a multimeter and a 9V battery.
 
DJI is currently custom making these AXS extension cables and has essentially taken over production for Sram. I should have 30 of these soon. Hopefully they will arrive in time for our first batch of Teewing frames.
 
Bike Barn AZ said:
DJI is currently custom making these AXS extension cables and has essentially taken over production for Sram. I should have 30 of these soon. Hopefully they will arrive in time for our first batch of Teewing frames.
Click to expand...
Bike Barn AZ said:
DJI is currently custom making these AXS extension cables and has essentially taken over production for Sram. I should have 30 of these soon. Hopefully they will arrive in time for our first batch of Teewing frames.
Click to expand...
Dibs
 
Hi there,

I just randomly purchased a cable to convert it to the z 405. Just realized after cutting, that it was already the right connector. Also the wiring seems correct. So they’re already out there.

image.webp
 
Last edited:
So you randomly managed to get the mythical correct Amflow-SRAM cable ?
Where did it come from ?
Just have to join it back together again ...
More pictures 🖼️ please.
 
Last edited:
DoubleCrunch said:
Hi there,

I just randomly purchased a cable to convert it to the z 405. Just realized after cutting, that it was already the right connector. Also the wiring seems correct. So they’re already out there.

View attachment 184033
Click to expand...
We need the photo of the cable bag that the AXS Power cable with Z405 connector, came in, not the light cable. And where you got it.

Also, I'm assuming one of those cables you are holding, has a battery clip on the other end ?
 
Astro66 said:
We need the photo of the cable bag that the AXS Power cable with Z405 connector, came in, not the light cable. And where you got it.

Also, I'm assuming one of those cables you are holding, has a battery clip on the other end ?
Click to expand...

The blue one is the light cable - I have the same one from nanobike.de
 
I bought it on Buycycle.com from a private seller for 70€. Just ordered a second one. The blue one I got is the lightcable from nanobike. The black one on the left is the one from buycycle with the SRAM adapter attached.

EDIT: Got confused about the whole talk with the z 405 light cable. Just looked at the color black and figured it must be the wrong connector.

EDIT2: @Astro66 It came without a bag so I got no serial for it sorry

IMG_2605.webp


IMG_2606.webp


IMG_2607.webp


IMG_2608.webp
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    668K
    Messages
    40,724
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top