its a two step process, look again for drive unit update... i did the same
A stronger Bosch SX and improvements for the CX coming on July 14th
- Thread starter knut7
- Start date
bullit398
Member
My ap doesnt show its got an update, anyone in the US got the update?iPhone user here. Nothing in my app.
I've looking forward to this for a long time. It's even my birthday today, so it would be a great present. Come on Bosch !!!
EDIT!!
I updated the Flow app, and rebooted. Now it's there, and downloading. Yay!!
reboot your phone, sometimes helps... then search again
Fredmeister69
Member
How does the Drive Unit Update work? Check again after updating the Software?
Yes, I also had 85nm limit and was concerned, so checked again and found a motor update, then all sorted
Daveed F
Active member
On a CX gen 5 I've got 750 w Max power, eMTB+ but not 100 Nm torque.
read comments above... needs a two step update.. check app again for motor update...
Daveed F
Active member
I saw it but can not find a motor update.
yes
But is it just in EMTB+ or any mode?
Prisondude
New Member
My performance line cx had an initial update which took quite a while. I got 750 wattd but no update for 100nm.tried rebooting phone and nothing
Last edited:
On my CX4, it took about 15 minutes to download the firmware, and another few minutes to install. All good.
So does anyone have a chart like this one for the new firmware, assistance levels, and mode?
So does anyone have a chart like this one for the new firmware, assistance levels, and mode?
Last edited:
Iphone or Android? I'm in California also using an iphone and it isn't showing up for me
iPhone. What do you see for the Flow App on the App Store?
Same issue......I forced a check for another update, and it says I am on the latest, and should be able to adjust the max torque. But I can only increase the watts....torque still capped at 85NM.
I'm just back from a ride on my Crafty since updating the firmware... I have to say that the extra power is great but EMTB+ needs a bit of work as the bike felt like it was trying to surge forward after every pedal stroke, it just didn't feel natural in any way shape or form so I just reverted back to normal EMTB which felt much better
Riding modes: Individually adapted to you
Always optimally supported: The riding modes for eBikes with Bosch system are precisely adapted to you and your eBike.
www.bosch-ebike.com
Try adjusting the tune for it. It works really well if you turn down the Dynamic a bit, to remove that surge feeling.
Thanks Rob, i'll give that a try next time I'm out
Prisondude
New Member
Wondering that to
GDAS
Active member
does this video help?
Jeremybub
Member
So we're you left with your original emtb AND emtb+ or did it replace emtb with emtb+?
Have ridden using emtb+? What is different?
TL DR Just EMTB+ & RaceRiding modes: Individually adapted to you
Always optimally supported: The riding modes for eBikes with Bosch system are precisely adapted to you and your eBike.
This is what I see. In the video, there should be a button to download this update. This is on a Santa Cruz Bullit. I am going to take it in to my LBS and have them hook it up to a computer.
I have to say, while I love the motor, everything else about the Bosch experience (software, display, charging) is so far behind Specialized, DJI, Fazua and TQ. At least a new display will be available. But the tuning options are somewhat mysterious in terms of what they actually do, and the lack of overrun tuning is a huge oversight.
Last edited:
As Rob said in Post #80, you can tune the overrun via the Dynamic setting.
I'm also on a Santa Cruz Bullit and i'm having the same issue. Let me know if the bike shop can get it done. I purchased the bike 2 hours away from where I live so not looking to drive there unless I have to
