Bafang m510

[Dado]

No. It is hardcoded in firmware. Only to ask Bafang devs to update it. I am ok with walk assistance, dont find it weak.

Not sure if it regulate max walking speed by wheel speed sensor or only to some rpms of rotor. If first option try to decrease circumference if this help to walk assist speed.

But true is every firmware is different and things which worked in older version can be spoiled in new version.

For example v3.5 in M510 has a long delay and I am noticing I am braking also motor for a second, when I stopp pedalling. What the hell that developers doing?!

 

[Dado]

Shikhov, how u mean u have wrong SOC percentage? If you have 43V firmware flashed (motor is not 48V, only depends what firmware voltage u flash, controller takes voltage up to 14S) and using 48V battery, it is like that. What do u expecting?

 

[Waynemarlow]

is there any way to increase walk mode speed?

Yup change your gears to get a faster speed, on my M600 I have to go down about 3 gears before getting an acceptible speed.

 

[Dado]

Wayne, could be it wont help if it regulate according speed of wheel.

 

[Waynemarlow]

Wayne, could be it wont help if it regulate according speed of wheel.

Mine seems to want to just spin at a set rpm, I just set the gearing accordingly. The irritating part is about 20m up the path you want to start riding again but you are then in too tall a gear to get going.

 

[temon10]

Mine seems to want to just spin at a set rpm, I just set the gearing accordingly. The irritating part is about 20m up the path you want to start riding again but you are then in too tall a gear to get going.

ok will try it. thx.

 

[shikhov]

Shikhov, how u mean u have wrong SOC percentage? If you have 43V firmware flashed (motor is not 48V, only depends what firmware voltage u flash, controller takes voltage up to 14S) and using 48V battery, it is like that. What do u expecting?

Yes, I meant that I use a 48V battery.

 

[Dado]

So then why u complaining it is showing wrong SOC %?

 

[temon10]

No, I'm not a retailer or similar, I came across this account by chance as a private person by reading on the internet

can u pls share that besst pro account here? curious to try it on my M510 V2 motor.

 

[LAnton]

can u pls share that besst pro account here? curious to try it on my M510 V2 motor.

Please throw it off, I also want to try to do it

 

[temon10]

This is Hardware and Software version of new Bafang M510 version 2.

 

[savas]

Where and when did you buy your motor?

 

[patdam]

This is Hardware and Software version of new Bafang M510 version 2.

View attachment 103507

thanks. personaly my motor is second revision (model I) and the controler is an FC 1.0. I suppose that those have the first rev (E) are in FC 0.0 ? Please could you share also the model of your torque sensor.

 

[temon10]

Where and when did you buy your motor?

i buy from Flora Joyebikes, if u interested i can give u her contact. I order end of November.

 

[thaeber]

i buy from Flora Joyebikes, if u interested i can give u her contact. I order end of November.

Did You test the motor already? Does it still have the high pitch whining noise/whistle? Thanks for n update mate!

 

[temon10]

Did You test the motor already? Does it still have the high pitch whining noise/whistle? Thanks for n update mate!

still have whining noise when high cadence, when slow it's not.

 

[iscander13]

Hi, guys. Do you have a rattling noise when going down the rocks from the motor?

 

[temon10]

Hi, guys. Do you have a rattling noise when going down the rocks from the motor?

nooo

 

[iscander13]

nooo

Thanks. It could be wire mounts

 

[temon10]

Thanks. It could be wire mounts

cabling inside frame usually

 

[Martin (Mallorca Guiding)]

i buy from Flora Joyebikes, if u interested i can give u her contact. I order end of November.

hi, have you bought any of Flora's eMTB frames? like the JB-E02??? We've just purchased 1 and M510 motor to build a demo eMTB... any feedback on the frame is welcome...thanks

 

[temon10]

hi, have you bought any of Flora's eMTB frames? like the JB-E02??? We've just purchased 1 and M510 motor to build a demo eMTB... any feedback on the frame is welcome...thanks

can u show me that frame picture?

 

[Martin (Mallorca Guiding)]

can u show me that frame picture?

 

[temon10]

 

[Martin (Mallorca Guiding)]

View attachment 103922

ah yea.. this is their older frame.. the 43V with a 14ah battery... our one is the 48v... both nice...

 

[Martin (Mallorca Guiding)]

View attachment 103922

Have you built it up?? Do you have any finished photos? how does it ride? are you happy with Flora?? I've had a bit of a nightmare if truth be known...

 

[temon10]

ah yea.. this is their older frame.. the 43V with a 14ah battery... our one is the 48v... both nice...

i buy only with battery case, so i can make maximum of 48v 17.5ah

 

[temon10]

Have you built it up?? Do you have any finished photos? how does it ride? are you happy with Flora?? I've had a bit of a nightmare if truth be known...

so far already make some transacton with her and never get disapponted. some little delay on shipping but it's normal.

 

[iscander13]

Hi, guys. Do you have a rattling noise when going down the rocks from the motor?

About the rattling sound when passing obstacles. The sound is definitely coming from the motor when I am standing on the pedals. There is no noise when I pedal on rocks. I did a test at home. Constant pressure on the left pedal. I swing the motor shaft through the chain. The sound is the same as what I hear when I ride downhill. Does anyone have the same sound?

- YouTube

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

youtube.com

- YouTube

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

youtube.com

- YouTube

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

youtube.com

 

[iscander13]

Also, has anyone found a way to fix the motor turning off (for a second or fraction of a second) in mode 1 and 2 when riding flat or up a slight uphill. I read that the m510 takes a little longer (about a minute) to calibrate when turned on. But waiting more than a minute doesn't help remove the turn offs on my motor.
Many thanks!