Yes it will be fine
New CEF69 bafang m510 and bafang m560 and cef50 bafang m820 frames
Guys, as i mentioned they had the linkage working with the Float X2 2025 and lower, I mentioned they need to get 2026 Float X2 as its bigger, they have purchased that and starting testing again measurments, once they get that fully fitted i would say should fit any shock on market.
Just need to be patient, I have had my bike since November and havnt seen trail yet, So feel my pain
Just need to be patient, I have had my bike since November and havnt seen trail yet, So feel my pain
I am not sure about the little black box for your first speed sensor photo. Mine did not come with that, but if I had to bet, it just get stuffed up inside the frame. Your second photo. I believe is extra hardware from Befang but our frames came with their own mounting hardware. The only items I used from your second photo were the locking ring and the two crank bolts on the top left. Hope this helps.
Wallyza
Member
So my frame etc finally arrived. Quality of the frame is really good.
I can now also confirm that the Float X does make contact with the frame at about 85% travel. Sorted that out by shifting the washers on the mounting hardware BUT this is not an ideal situation. I will contact Jean and see what the options are.
I am also not able to get the motor to give any assistance. Controller works, gives cadence and speed etc but the motor does not kick in.
Does anyone have links to installation videos of links for manuals? Bafangs support to the individual is definately on the lacking side.
Thanks all
I can now also confirm that the Float X does make contact with the frame at about 85% travel. Sorted that out by shifting the washers on the mounting hardware BUT this is not an ideal situation. I will contact Jean and see what the options are.
I am also not able to get the motor to give any assistance. Controller works, gives cadence and speed etc but the motor does not kick in.
Does anyone have links to installation videos of links for manuals? Bafangs support to the individual is definately on the lacking side.
Thanks all
Wallyza
Member
Everything lights up, yes. Cadence and speed show when I turn the cranks. I am going to connect my BESST tool and see if I can see any issues.
The motor won’t engage unless you are on it. If it’s n the stand it won’t go. Did you actually try riding it?
Wallyza
Member
Aah! No, I did not try riding it. Will give it a go this afternoon once I have reassembled.
Wallyza
Member
That was the correct answer! All operating as it should. Went for a test ride and the bike feels really good. Weight comes in at 21.5kgs.
Also reset the parameters on the BESST tool. They seem to be giving accounts out a bit easier than they used to. Sent in my account request on the app and 2 minutes later was approved and could work online with the BESST tool.
vikino1
Active member
Wallyza
Member
I had my laptop connected to the BESST tool and my bike. A prompt came up asking to register. I entered my details, and said I was a dealer, and a few minutes later I had my username set up. I then had full use if the tool, not just the off line functions.
Hope that helps?
vikino1
Active member
Thank you, I'll try it.
Edit: It worked, it works.
Edit: It worked, it works.
Last edited:
Hello, sorry for the bump but can you make me a quote for a L size frame set with 510 motor and battery? I can't private message you yet sorry..
temon10
Well-known member
no need for that
Wallyza
Member
Speaking under correction, but I think it is frame specific as it bolts onto the frame, not the motor.
Best would be to get them to courier one to you at their cost as it was their mistake.
Not sure of the3d print options but I think they would be scarce.
temon10
Well-known member
I got 3D files of motor cover from Jean. U can download it,
here is the 3D file of CEF69 cover motor provide from Jean
Hi, thank you will try that
Triman
New Member
How did you get the BESST tool? Dies it come in the kit from SZZS Bikes? I'm waiting for a quote on a frame, seems like the good timing to check for such "details"
Wallyza
Member
It does not come in the kit. I ordered it from SZZS but paid extra. I think long term it will be worth it.How did you get the BESST tool? Dies it come in the kit from SZZS Bikes? I'm waiting for a quote on a frame, seems like the good timing to check for such "details"
They have it on their list of products, was not too expensive.
temon10
Well-known member
no need to use brake sensor
how to avoid over run of the motor?
temon10
Well-known member
backpedal, over run is controllable
Not sure if normal, but mine gets hot. I leave it on a solid floor and not carpet.
