Im not familar with that screen, I know on the screen the CEF69 DPC030 from this Thread doesnt have the ability to do that. Do you have a CEF69 with DCP010? I know on my Bafang go app you need to navigate to upload that to strava thats useless if you want to ride a trail and upload you dont know where your going half time not to a physical address. I guess you don't need it
Vedremo io in paese uso 25kmh mai al max e comunque sarei curioso di provare pedalpass ma costa troppo secondo meNot real good for me i will proably stack alot LOL atleast you have backup if screen fails, Didnt you want to try eggrider? I would but no where to put it unless i remount it in frame, Dont worry iv considered it to 3D print mount, i ordered UART one sent it back and changed mind again, then chatted with fellow aussie for pedal pass sovled my no work effort upgrade. BBR is good too the V2 has some differnet features. Hidden in Australia they just assume its moded and by by to bike laws getting bad downunder
its easier to hide spending on my bikes not noticed by the wife, so lucky in that sense.
hi. I think there are 4 pins, 2 for charging and 2 for the range extender, because the range extender goes through the splitter.
Ahh, range extender! Clever!hi. I think there are 4 pins, 2 for charging and 2 for the range extender, because the range extender goes through the splitter.
and the seatstay bridge is the connection between the seatstay bars. it additionally stabilizes the rear end. the first model cef69 does not have a bridge, the new model does.
Dovresti avere un cavo per la ricarica da inserire in quella porta per ricaricare la batteria serve e anche per metterne un altra
Strange, my CEF69 is on the way, but my X2 adapted linkage seem different from your and those of https://www.emtbforums.com/members/nivek-razla.53933/ ?
how did you upgrade it? firmware for rs?
Tutti uguali sono col telaio cf69
That looks epic with Coil perfect photo too. Nice well doneFinally, my mullet CEF69 build is complete!
I uploaded with Open Bafang tool and changed to 16A i know RS is 16A as i put in motor previously and checked but wouldnt work becasue of the sensor, got .5kph, I wouldnt recomend people doing this unless you are sure you know what you are doing.
if you have Fusion i can send you the link in file if you want to measure it, it is much shorter and fatter, i reused the same mount to the shock so that hasnt changed, just the bottom linkage.
What is your BB height? Any issues with pedal strikes with the new link? Bike looks sick!
Can you please share what frame downtube protection are you using?
With a 180 mm fork and an offset bushing on the rear shock, I still ended up with a 350mm bottom bracket height, which is great. The new link might have help.
The downtube protector is just a piece I cut from a rubberized old car door protector. The length is perfect, but I still need a better adhesive to keep it securely in place.
If anyone knows something for help would appreciate it.
ebikes.ca
Did the washers help? I’ve got a couple of small creaks not sure were they are coming from. I’ve greased all the pivot points.Anyone getting carbon creak sound from the frame (motor area i think) when pedaling? seems to get worse the more torque i put in but unable to fix it so far, its really annoying
Edit: I saw some people talking about a slight motor gap and i also have that, ill try to add some small washers there. My gaps are not that big so i had to order some quite thin washers but im fairly certain the sound is coming from there, ill update you guys later as its useful info.
Hey sorry, really bad weather here for some time ill update later when i can take a proper ride. The washers i had to use were only 0.4mm thick but it seemed to fill the gap, hoping it fixes it.
Nice!! I am still waiting mine.
