120 Nm update for the Bosch CX and CX Race Announced

[Kepa]

Some folk are never happy.. How do you think I feel, I’ve got the SX motor and definitely feel like the poor relation now, forgotten about, not worthy of attention…..

It’s the Garmin live data update that has got me interested in this update.

PS, no app update showing for me yet, 07:40.

I just updated the bike, let's see later this evening whether it kills me or not

 

[smokey79]

I just updated the bike, let's see later this evening whether it kills me or not

I just updated the bike, let's see later this evening whether it kills me or not

I've got no update showing on my current flow app & no new flow app on play store

 

[slavio]

I've got no update showing on my current flow app & no new flow app on play store

Will take a few days for the update to be propagated to Google Store in all regions. If you want to have it ASAP try Flow app update from Apple Store

 

[smokey79]

Will take a few days for the update to be propagated to Google Store in all regions. If you want to have it ASAP try Flow app update from Apple Store

Thanks

 

[emtbPhil]

Will take a few days for the update to be propagated to Google Store in all regions. If you want to have it ASAP try Flow app update from Apple Store

No update yet here on iPhone App Store either.

I’m convinced it will appear as soon as I finish my 3hr ride lol

 

[_Jason_South_Wales_]

I'm not sure if my 2022 Cube performance line cx ( BDU3741 )
will even get the update??
85nm is great but an increase would be welcomed.

 

[Jackware]

I'm not sure if my 2022 Cube performance line cx ( BDU3741 )
will even get the update??
85nm is great but an increase would be welcomed.

No, you'll just get an increase in assistance to 600%, presuming Cube have not added any restrictions. When your flow app shows the update (mine updated overnight) it gives the info in the 'What's new?' section.

 

[_Jason_South_Wales_]

No, you'll just get an increase in assistance to 600%, presuming Cube have not added any restrictions. When your flow app is updated (mine updated overnight) it gives the info in the 'What's new?' section.

So I'll be stuck with 85nm?
Would an assistance to 600% make a difference?
Sorry I'm not familiar with nearly everything ebike related

 

[Rockhopper70]

Nothing still at 9:40am UK time.

 

[Rockhopper70]

The app itself doesn't update, but the bike update may be showing if you open the app and click on the 'What's new?' text

Yeh, tried the bike. Not due out today anyway but it’d be nice the have it for the Garmin link.

 

[Bomble]

Mine is updating now, uk

 

[Eyuplad]

So I'll be stuck with 85nm?
Would an assistance to 600% make a difference?
Sorry I'm not familiar with nearly everything ebike related

So I'll be stuck with 85nm?
Would an assistance to 600% make a difference?
Sorry I'm not familiar with nearly everything ebike related

Yes. Anything but the Gen 5 CX and Cargoline will remain at 85nm

 

[bomberstudios]

App update already up on the Apple App Store in Spain

 

[slavio]

Just got updated Flow app version in Google Play Store in Poland

 

[nickf]

Would an assistance to 600% make a difference?

You will get more motor support with less muscular effort expended, but the support will still max out at your current power/torque levels.

 

[emtbPhil]

App just updated on iOS

Literally in the car park just as I was about to ride. Groups all waiting now lol

 

[Adyzakydany]

just got the update, UK, Bosch Gen 5 and I can’t see 120NM as an option. Slider is max at 100NM?

 

[Mlok]

So I'll be stuck with 85nm?
Would an assistance to 600% make a difference?

Measurement for CX4: To call up the maximum output of around 540 watts, almost 180 watts of power are required from the rider.
Only difference will be a bit less rider's power requiered for max motor output (around 100W - It won't actually be exactly 600%) for speed up to 15km/h.

 

[emtbPhil]

just got the update, UK, Bosch Gen 5 and I can’t see 120NM as an option. Slider is max at 100NM?

Same

 

[killerade]

 

[Rob_S]

Just put it in turbo and tell everyone it updated fine Phil
I reckon this update is avinox trolling Bosch and it actually does nothing - tomorrow there will probably be an announcement avinox have acquired Bosch bike division and are shutting it down for being too slow. Either that or cube are limiting it to their new range, again to make you buy an avinox bike

 

[_Jason_South_Wales_]

Measurement for CX4: To call up the maximum output of around 540 watts, almost 180 watts of power are required from the rider.
Only difference will be a bit less rider's power requiered for max motor output (around 100W - It won't actually be exactly 600%) for speed up to 15km/h.

So I will get an update sometime from today for the assistance upgrade? Thanks

 

[Rob_S]

For those not seeing any change. Delete and reinstall flow app, then go to components, drive unit and you should see the next phase (20 second) update to get the actual adjustment installed…faff, my kid could vibe code something better than this, but at least it works

 

[Bomble]

Anyone know where to adjust the overrun and if it’s possible to turn down the 600% assistance?

 

[bomberstudios]

App and bike updated. But no sign of the Garmin integration

 

[Raptor]

Those on Android - have patience - Bosch has released it to Google Play but the sync is taking some time across Google's servers. The app version is 1.35.6 and is slowly making its way out there

 

[slavio]

App and bike updated. But no sign of the Garmin integration

It's there - just follow these steps:

Post in thread 'Project to enable Bosch + Garmin integration'

May 3, 2026

After updating my Garmin Edge 840 to the newest beta software 31.23 I can confirm you can already pair Bosh Gen5 with Edge via the Flow app (version 1.34) (Settings -> Components -> Add new device -> Accessories and on your Garmin you need to go to Sensors section -> Add Sensor -> eBike -> Bosch Smart System eBike). After you pair both your Garmin should show up in Components section of the Flow app as External Display (see screenshot below)

Once done your Garmin will now show/record: Power, Cadence, (didn't check Speed as I have external speed sensor), Gear Combo (though for me it's bit...

• slavio

• 

 

[bomberstudios]

It's there - just follow these steps:

Post in thread 'Project to enable Bosch + Garmin integration'

May 3, 2026

After updating my Garmin Edge 840 to the newest beta software 31.23 I can confirm you can already pair Bosh Gen5 with Edge via the Flow app (version 1.34) (Settings -> Components -> Add new device -> Accessories and on your Garmin you need to go to Sensors section -> Add Sensor -> eBike -> Bosch Smart System eBike). After you pair both your Garmin should show up in Components section of the Flow app as External Display (see screenshot below)

Once done your Garmin will now show/record: Power, Cadence, (didn't check Speed as I have external speed sensor), Gear Combo (though for me it's bit...

• slavio

• 

Thanks! I was under the impression that they would also add an integration on the “Connected Services” section in the app but that doesn’t seem to be the case (I don’t have a Garmin Edge and was hoping Bosch would push the data directly from the app to Garmin Connect)

 

[slavio]

Thanks! I was under the impression that they would also add an integration on the “Connected Services” section in the app but that doesn’t seem to be the case (I don’t have a Garmin Edge and was hoping Bosch would push the data directly from the app to Garmin Connect)

If it was configured they way you're depicting that would still involve recording the activity in Flow app and only the final activity results would be pushed through to Garmin API.

The main trick here is to make power/cadence data avaialble in real time to an external device during the activity

 

[cebo]

View attachment 183779

Up to 24hours to take for what? to refresh the sync from the bike to the app?
Sorry, but this is poor sw development.