E-MAD MALC
Well-known member
Nice one BeBikerNice!
Cube Stereo 160 S 750 2022 Specs Modifications
- Thread starter BeBiker
- Start date
- Thread starter
- #152
The other 40 wheels around here, from our cars, traktors, kids trailer, kids bikes, lawn mower,... all have normal Schrader valves, and I inflate them with a tyre inflator like you sometimes see at gas stations.
The Decathlon Rockrider E-st900 came with strange valves named Presta, so I drilled the wheels to accept Schrader too.
The Cube also came with those road bike Presta valves, but drilling the wheels made me hesitate a bit, because they are narrower, and the surface is a bit more pointed.
I always used a hand pump or these small adapters, which have to be removed first to open the presta valve, then put on again, inflate, take off, close the Presta, put on, cap on.
But now I bought this:
www.radcranks.de
The trick here is that the ennoying Presta valve is removed permanently, and the adapter itself has a
Schrader valve.
It's simply bolt on and self-sealing, so nothing to drill, modify or seal.
The inner valve is removable like all Schrader valves, for filling up tubeless fluid.
The Decathlon Rockrider E-st900 came with strange valves named Presta, so I drilled the wheels to accept Schrader too.
The Cube also came with those road bike Presta valves, but drilling the wheels made me hesitate a bit, because they are narrower, and the surface is a bit more pointed.
I always used a hand pump or these small adapters, which have to be removed first to open the presta valve, then put on again, inflate, take off, close the Presta, put on, cap on.
But now I bought this:
Presta zu Schrader Ventilkonverter
Hochwertiger Ventilkonverter. Lieferung in 2 Tagen.
www.radcranks.de
The trick here is that the ennoying Presta valve is removed permanently, and the adapter itself has a
Schrader valve.
It's simply bolt on and self-sealing, so nothing to drill, modify or seal.
The inner valve is removable like all Schrader valves, for filling up tubeless fluid.
Last edited:
E-MAD MALC
Well-known member
Another quarter of a gram you've added to your bike can you tolerate itThe other 40 wheels around here, from our cars, traktors, kids trailer, kids bikes, lawn mower,... all have normal Schrader valves, and I inflate them with a tyre inflator like you sometimes see at gas stations.
The Decathlon Rockrider E-st900 came with strange valves named Presta, so I drilled the wheels to accept Schrader too.
The Cube also came with those road bike Presta valves, but drilling the wheels made me hesitate a bit, because they are narrower, and the surface is a bit more pointed.
I always used a hand pump or these small adapters, which have to be removed first to open the presta valve, then put on again, inflate, take off, close the Presta, put on, cap on.
View attachment 112975
But now I bought this:
View attachment 112967
Presta zu Schrader Ventilkonverter
Hochwertiger Ventilkonverter. Lieferung in 2 Tagen.
The trick here is that the ennoying Presta valve is removed permanently, and the adapter itself has a
Schrader valve.
View attachment 112977
It's simply bolt on and self-sealing, so nothing to drill, modify or seal.
The inner valve is removable like all Schrader valves, for filling up tubeless fluid.
What's right with them. They are flimsy, fiddly to use and completely pointless on a MTB wheel. Can understand it on a road bike with razor thin wheels but unnecessary on a MTB.
I dunno, never had problems with any valve type. I take care not to break the valve off when using a small hand pump. Perhaps they could be shorter though...
E-MAD MALC
Well-known member
Well this kind of give you the advantages and disadvantages of the two
www.cyclingnews.com
Schrader vs Presta: Understanding the differences
Explaining the similarities and differences between two kinds of bike valves
www.cyclingnews.com
Presta is better for pressures over 100psi... Considering most emtb riders are trying to run as low as possible I don't think it's an issueWell this kind of give you the advantages and disadvantages of the two
Schrader vs Presta: Understanding the differences
Explaining the similarities and differences between two kinds of bike valves
- Thread starter
- #162
The Pirelli M back tyre is worn out.
In the compromise between mud, asphalt, traction, rolling resistance,... it suited me better than the Pirelli R.
At the front I keep the S with the big knobs.
And at the back, trying the Pirelli Scorpion H now.
There was only 10mL of the +-60mL tubeless milk remaining.
In the compromise between mud, asphalt, traction, rolling resistance,... it suited me better than the Pirelli R.
At the front I keep the S with the big knobs.
And at the back, trying the Pirelli Scorpion H now.
There was only 10mL of the +-60mL tubeless milk remaining.
Last edited:
E-MAD MALC
Well-known member
I'm running the maxxis shorties front and rear in this shite weather bloody marvelous in the mud gòe grip don't know how long the wiĺ last on other surfaces
- Thread starter
- #165
I do +-30% asphalt, with that profile my teeth fall out of my mouth
60ml?! I use 140
E-MAD MALC
Well-known member
So I'll be OK them with 500ml lol60ml?! I use 140
That would make for an interesting ride with all that sloshing around.
- Thread starter
- #170
Since a few times, the fork steering fights back a bit, feels like the steering has a few set positions, no continuous anymore.
Who knows which bearings kit do I need?
I found things online, but never a reference to what bike exactly it fits
www.bike-discount.de
www.cube-store-hameln.de
www.e-bikeshop.co.uk
Any tools I need? I saw this:
www.tradeinn.com
Who knows which bearings kit do I need?
I found things online, but never a reference to what bike exactly it fits
Headset #16 (IS52/28.6 - IS52/40)
Product features - Cube Headset #16 (IS52/28.6 - IS52/40) Model: Headset #16 IS52/28.6 - IS52/40 (1 1/2" integrated) Type: Integrated (IS) Steerer: 1 1/2" Bearing: Industrial ball bearings Upper: 1 1/8" -...
www.bike-discount.de
CUBE Steuersatz 16 - Cube Store Hameln
www.cube-store-hameln.de
Cube Headset Number 16 ICR - 8016 – e-bikeshop.co.uk
The Cube Headset number 16 is a replacement or spare Cube headset for frames with integrated cable routing and Block-Lock for 1 1/2" tapered steerer tubes.
www.e-bikeshop.co.uk
CUBE STEREO HYBRID 160 SL / TM / RACE 27.5" 2021 REPLACEMENT HEADSET B
Consists of 2 replacement headset bearings, spec as follows: ZS56 TOP HEADSET BEARING ID - 40mmOD - 52mmH - 6.5mmANGLE - 36˚
/ 45˚ ZS56 BOTTOM HEADSET BEARING ID - 40mm OD - 52mm H - 6.5mm ANGLE - 36˚
/ 45˚ Please ensure you measure you old bearings and compare to the dimensions above...
thebikehouse.co.uk
Any tools I need? I saw this:
Park tool RT-2 Head Cup Remover Oversized Tool, Silver | Bikeinn
Get Park tool RT-2 Head Cup Remover Oversized Tool in Silver for 0 €. Ideal for bike with fast delivery. Buy General tools at Bikeinn!
E-MAD MALC
Well-known member
Evening Buddy
All I know is the steerer tube on the Cube bikes are 56mm top and bottom
You've got the internal ròuting headset so can't suggest anything all I know is the tools I used to swap the headset out were these two tools didn't buy into park tools for these cos not really used that much
All I know is the steerer tube on the Cube bikes are 56mm top and bottom
You've got the internal ròuting headset so can't suggest anything all I know is the tools I used to swap the headset out were these two tools didn't buy into park tools for these cos not really used that much
- Thread starter
- #172
It seems my bike has the: ACROS AZF-1035 headset.
This is the zs56 icr at the top, and the zs56 blocklock at the bottom.
This shop on Ebay sells the bearings separate, but unfortunately no stock.
For all bikes using the ACROS AZF-1035 Headset Bearing Kit
Upper Bearing - MH-P03K
Lower Bearing - MH-P25K
This is the zs56 icr at the top, and the zs56 blocklock at the bottom.
This shop on Ebay sells the bearings separate, but unfortunately no stock.
ACROS AZF-1035 Headset Bearing Kit | eBay.de
Forall bikes using the ACROS AZF-1035 Headset Bearing Kit. Both the upper and lower headset bearings, two bearings included in sale. Upper Bearing - MH-P03K. Lower Bearing - MH-P25K. Maybe you need help choosing the right parts?.
www.ebay.de
For all bikes using the ACROS AZF-1035 Headset Bearing Kit
Upper Bearing - MH-P03K
Lower Bearing - MH-P25K
- Thread starter
- #173
Enduro Bearings Black Oxide Balhoofdlager
De Enduro Bearings Black Oxide balhoofdlagers zijn duurzamer en betrouwbaarder vanwege de zwarte coating om roestvorming te voorkomen. De lagers bevatten de grootst
www.mantel.com
XLC Balhoofdlager Balhoofdlager
Met deze XLC Balhoofdlager gaat jouw stuur weer soepel draaien. Deze stalen lagers hebben een hoge prijs-kwaliteitsverhouding. Ook is het aanbod breed, zodat de kans
www.mantel.com
Enduro Bearings Black Oxide Balhoofdlager
De Enduro Bearings Black Oxide balhoofdlagers zijn duurzamer en betrouwbaarder vanwege de zwarte coating om roestvorming te voorkomen. De lagers bevatten de grootst
www.mantel.com
41mm/30.20mm/36gr/45gr/6.5mm
Which one is the best fit?
The bearings of this set looks similar too:
IS41/IS52 Headset for Radon Jealous
Product features - Acros Headset IS41 - IS52 Model: Headset Acros (Tapered 1 1/8" - 1 1/2" integrated) Type: Integrated (IS) Steerer: Tapered 1 1/8“- 1 1/2“ Top cover: 4.8mm...
www.bike-discount.de
E-MAD MALC
Well-known member
Are you still trying to source these bearingIt seems my bike has the: ACROS AZF-1035 headset.
View attachment 135088
This is the zs56 icr at the top, and the zs56 blocklock at the bottom.
This shop on Ebay sells the bearings separate, but unfortunately no stock.
ACROS AZF-1035 Headset Bearing Kit | eBay.de
Forall bikes using the ACROS AZF-1035 Headset Bearing Kit. Both the upper and lower headset bearings, two bearings included in sale. Upper Bearing - MH-P03K. Lower Bearing - MH-P25K. Maybe you need help choosing the right parts?.www.ebay.de
For all bikes using the ACROS AZF-1035 Headset Bearing Kit
Upper Bearing - MH-P03K
Lower Bearing - MH-P25K
View attachment 135089
Cos this is where I can pick these up
Search results for: 'MH-P25K Headset Bearing'
www.kineticbikebearings.com
Search results for: 'MH-P03K Headset Bearing'
www.kineticbikebearings.com
E-MAD MALC
Well-known member
No mate
I must admit I still like to run my cabling out side to me it's just more convenient when swapping things out and servicing
I have slackened the head angle to 64°
I'm finding it ok
I must admit I still like to run my cabling out side to me it's just more convenient when swapping things out and servicing
I have slackened the head angle to 64°
I'm finding it ok
Might be to late, but just in case a table with bearings 2022 models:
Bearing Sets Cube 2022
Bearing Sets Cube 2022
- Thread starter
- #178
So I measured the bearing, 52mm/40mm/7mm is the one at the bottom of the ACROS headset.
Ordered Sunday evening 21h, delivered Monday 10h30. Incredible.
Besides these, I ordered multiple others, to be sure to have one that fits.
www.mantel.com
www.mantel.com
With some precision mindset, it was easy to replace.
Ordered Sunday evening 21h, delivered Monday 10h30. Incredible.
Besides these, I ordered multiple others, to be sure to have one that fits.
Enduro Bearings Black Oxide Balhoofdlager
De Enduro Bearings Black Oxide balhoofdlagers zijn duurzamer en betrouwbaarder vanwege de zwarte coating om roestvorming te voorkomen. De lagers bevatten de grootst
www.mantel.com
FSA Staal Balhoofdlager
Stalen FSA balhoofdlagers voor geïntegreerde en semi-geïntegreerde balhoofdstellen, prijs is per stuk.Om de juiste maat van je balhoofdlager te kunnen be
www.mantel.com
With some precision mindset, it was easy to replace.
Last edited:
- Thread starter
- #179
This is how the old bearing looks, after cleaning.
My guess is that some water got above this lower bearing, and slowly entered through the upper sealing to the inside.
The ICR Internal Cable Routing is a bit messy, but with some patience it's ok.
The new bearing inside:
My guess is that some water got above this lower bearing, and slowly entered through the upper sealing to the inside.
The ICR Internal Cable Routing is a bit messy, but with some patience it's ok.
The new bearing inside:
Last edited:
E-MAD MALC
Well-known member
Got to admit, it's amazing how those bearings get shifted up so much
Similar Threads
-
For Sale (BIKE) 2024 Cube Stereo 160 slx 750wh Large: 1900- Started by adamdavies11b
- Replies: 0
-
-
Sold 2022 Cube Stereo Hybrid 140 HPC SL 750 Large: 3450- Started by Ebikes-Unlimited
- Replies: 0
-
-
For Sale (BIKE) 2022 Cube Stereo Hybrid 140 HPC SL 750WH - PRICE DROP £2400 ono
- Started by TwoTokens
- Replies: 2