Ahoj, riesim ten isty problem, ako ty, stve ma vysoky vykon na Bafangu M500 na 1. stupni. Aj si s tym nejako pokrocil ?
Ja som skusil zatial 3 firmwery. Dva zbesilo hucia 300w a viac ked dotoho riadne busim a jeden dava tak do 200-220w, ale aj to mi pride vela. Chcelo by to tak do 100 max 150
A member of this forum recommended me to message you since you are familiar with riding Ebikes in the everglades. I am thinking of purchasing a bike to use in the Big cypress / everglades area and would appreciate any advice you can give me in what to look for? Thanks
hello Infex, I have the same problem with my Levo that you posted about in 2020 - when I switch on my Levo, the TCU lights up in the usual way, the power mode indicator shows briefly, then it goes off! exactly the same as in the video you posted. did you get it fixed in the end? what was the solution? I am tempted to buy a new TCU but am worried it may be a waste.
Hi! Sorry for my english i change the controller in my m500 motor with a m600 Controller. I make a Adapter for the cables. But i cant calibrate the Position Sensor. When i try it, it only moved just very small steps and stops... what can i try to Do? Thank you So much! Greetings from germany
Bonjour je souhaiterai obtenir l'adaptateur cx gen2 vers cx gen 4, aussi je souhaiterais passer d'un powerline vers cx gen 4 cela existe t'il !? [email protected]
Hi, I saw your post from a while back about planning for the tour du Mt Blanc.
Did you complete it? I'm planning to do it in September and would appreciate corresponding with you and hearing about your trip
James
My name is Bartek, I'm from Poland and I have a few questions for you about turning off the internal speed sensor.
After turning off the internal speed sensor and installing a new one with a spoke magnet, does the display show the correct speed?
Disabling the external speed sensor removes the speed limit?
Can I ask you for a list of exactly what parts you bought, so that I don't buy the wrong ones?
Vadll, looks like you knowledge of this software is next level. I'm doing as much research as possible on upgrading my ep8-rs to STD ep8.
I have some question, so if you have guidelines it would help so much.
I'm reading through at the posts and just making sure I have all the info I can before doing it.
Thanks
Hi Rod, I'm thinking of changing from a Kenevo to a Rise. I see you've changed from a Rise to a Levo. I'm a little concerned about the robustness of the Rise. I'd like more range, less motor support and lower weight. What differences have you noticed with Rise/Levo ownership both in terms of use and maintenance requirements. Cheers Brian
Hello. I saw a post where you mentioned "l have 2 used SC-E8000 displays both in perfect working condition, if they are of any use to you.". Do you still have these?
Hello, I have also a bike with rim magnet and it seems impossible to tune that type of bosch system.
How did you converted your bike to the Bosch swing arm speed sensor / spoke magnet?
Does it now works well with a speedbox?
Grtz
Peter
Did I read that correctly that you have a DZ41 available. ? I'm on the hunt for one to get me riding because I have one on order from Ali Express but it will be a couple of weeks till it arrives.
Hello. I saw you had a problem with mastermind tcu on your Specialized e-bike. The fuzzy screen problem. Did you manage to find the cause? Can you please let me know what was the problem and did you solve it?
I have the same issue on my dispaly. And I am curious how could be fixed and how long will it take until it totaly breaks.
Hi, I am a new e bike rider. Was lucky to get a Giant e bike as a gift and enjoying the ride very much! Have some trouble now with my battery or charger . still figuring out which?
Hey, sorry to bother you!
That photo you posted of your sonni is pretty much my dream build, with the e-storia, the grey zeb and the gx transmission, so great could you please post some more pictures of it?
Cheers, have a nice day
Hi, I saw your post about the Giant Energypaks. I haven't tried yet, but you said that shorting pin5 and pin6 made it work correctly. Are you able to use the bike and charge without problems? Did you short the pins inside the case or outside? Thanks for your help.
Hello Maramouse))
Just wondering if you manage to change your stem on your strive ON?
If you did..
Did you use round standard spacers above the original spacer that the cabel runs trough??
Thanx
Bjørn
Ciao,
Sto avendo il tuo stesso problema con l'allentamento della ghiera del motore Bosch gen4. In estrema ratio ho forato e filettato la ghiera per mettere un grano M4 che poi va ad inserirsi su di un corrispondente foro dello spider ma la soluzione non mi piace. Tu come hai risolto?
Grazie
Ivan