SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

[forsa355]

I think the bottom using 22. Just grind it until it fitted.

when I inquired what size bushing to get, Jean confirmed with their engineers to get 22, not 22.2. Look back in this thread... we debated it as the opening in the specs is 22.2. I ordered 20... will see if that works when I get my frame

 

[temon10]

when I inquired what size bushing to get, Jean confirmed with their engineers to get 22, not 22.2. Look back in this thread... we debated it as the opening in the specs is 22.2. I ordered 20... will see if that works when I get my frame

I use default FOX DPS bushing from Polygon Siskiu and direct fits.

 

[stuff]

22.2 fitted top and bottom over here also

 

[stuff]

For now it's not work.

It works with the standard bafang go app

 

[brbr]

It works with the standard bafang go app

And what can you do with the app?

 

[temon10]

It works with the standard bafang go app

yes, but not for Go+ app

 

[stuff]

And what can you do with the app?

Not much tbh, just view typical stuff and update firmware.
Not worth it for now

 

[mike_kelly]

when I inquired what size bushing to get, Jean confirmed with their engineers to get 22, not 22.2. Look back in this thread... we debated it as the opening in the specs is 22.2. I ordered 20... will see if that works when I get my frame

I posted, in the spec thread, a diagram from the SZZS engineer that clearly shows the bushing as being 22.2

 

[temon10]

Long time no see @TCFlowClyde, busy on building CEF50??

 

[temon10]

What is the best wheel size and circumference setting for mullet to get the right distance measure?

 

[Sander23]

I think the Float X should fit. My MegNeg is as thick as a coil unfortunately.

How wide is that body from the megneg?
Im not sure if i have enough space to fit one.

 

[stuff]

How wide is that body from the megneg?
Im not sure if i have enough space to fit one.
View attachment 116239

It fits a megneg

 

[stuff]

Today the Nukeproof/token headset arrived.
For the remote plug (dp e181) to fit the plastic in a whole needs to be trimmed a lil, apart from that it fits OK.

I’ll take advantage of disassembling and route cables better, add some noise insulation and upgrade the shifter to xt.
Also upgrading the fork to a lyrik for stiffness

 

[temon10]

Today the Nukeproof/token headset arrived.
For the remote plug (dp e181) to fit the plastic in a whole needs to be trimmed a lil, apart from that it fits OK.

I’ll take advantage of disassembling and route cables better, add some noise insulation and upgrade the shifter to xt.
Also upgrading the fork to a lyrik for stiffness

any picture or video?

 

[stuff]

Just trimming the plastic a lil it goes through

 

[stuff]

Took me less than 1’ with the dremel since its plastic. Now it fits properly and just have to cut the grommet and it’ll look oem

 

[stuff]

100% recommended the headset upgrade. Cables go WAY smoother now

 

[clix]

70k, quite thin but either way 4hrs riding for me was impressive!

Next test will be using mid-level the whole ride, stay tuned for tomorrows report

Hey, I think you owe us the mid-level report.
Km's and elevation gain in second level, please!

 

[mike_kelly]

https://www.aliexpress.us/item/3256803836208720.html?spm=a2g0o.order_list.order_list_main.5.292b18020xbwUn&gatewayAdapt=glo2usa

$19 US free shipping, Message seller CEF50 Jersey. Short, long, winter, or summer weight.
Typical Asian sizing. I normally take a US Xl and I need an Asian 3xl or 4Xl for loose fit.

 

[stuff]

Hey, I think you owe us the mid-level report.
Km's and elevation gain in second level, please!

Once I finish the headset + some noise reduction on cables i’ll be able to ride it again!
Sorry its half assembled now

 

[Stephen B]

I am having my Fox Float X2 210 x 55 stroke reduced to 50mm. It has one volume spacer in it now should I have them leave it in?
I don't feel comfortable taking the shock apart myself.

 

[stuff]

I am having my Fox Float X2 210 x 55 stroke reduced to 50mm. It has one volume spacer in it now should I have them leave it in?
I don't feel comfortable taking the shock apart myself.

Leave it. Adding or removing a volume spacer is a job that doesnt even require tools

 

[stuff]

Nukeproof headset, fits amazingly well and I wrapped the cables with automotive cloth tape to avoid any possible issues

 

[stuff]

This is how it looks installed

 

[mike_kelly]

Really sweet, Stuff.

 

[temon10]

Member here already received CEF50 frame (assembled or not yet) :
@LAnton
@temon10
@stuff
@TCFlowClyde

Others pls add, so we can share more our experience with this CEF50 frame and M820 motor.

 

[Kenk3589]

I got it.. I just pulled out the 720 wh battery and it’s significantly heavier than the motor or the frame… kind of wish I went with a lighter battery

 

[Kenk3589]

Anyone know if we need a special chainring tool to tighten it? I’m not sure I received one if so..

Part c and d?

 

[temon10]

Anyone know if we need a special chainring tool to tighten it? I’m not sure I received one if so..

Part c and d?

View attachment 116660

same as bosch

 

[Kenk3589]

when I inquired what size bushing to get, Jean confirmed with their engineers to get 22, not 22.2. Look back in this thread... we debated it as the opening in the specs is 22.2. I ordered 20... will see if that works when I get my frame

Hey so it is 22.2. Linda had me scratch the paint off the frame and it fit.