SZZS CEF69 Build with New Bafang M510 3.0 version

[lalachill]

Can anybody share there cable management? Mine seems to make a lot of noise. lol
Didn't really plan it out coz too excited to ride. I might have some time to disassemble it and do it properly

 

[Torqshred]

Can anybody share there cable management? Mine seems to make a lot of noise. lol
Didn't really plan it out coz too excited to ride. I might have some time to disassemble it and do it properly

 

[lalachill]

View attachment 188711

What is it like inside the frame?
Did you have a pic for it?

 

[curufinwe_wins]

What is it like inside the frame?
Did you have a pic for it?

I don't have a picture, but mine is pretty aggressively stuck besides the battery. I'd actually have prefered it not be there, but I couldn't seem to prevent it falling down.

 

[patdam]

[ATTACHE=plein]188711[/ATTACHER]

Connecteurs de tuyau Magura Sale avec différents angles.

 

[kaaskopf]

Can anybody share there cable management? Mine seems to make a lot of noise. lol
Didn't really plan it out coz too excited to ride. I might have some time to disassemble it and do it properly

use foam tube

 

[cascoblanco]

En un cuadro cef69 alguien podría decirme en talla L cual es la longitud máxima de tija que entra dentro del cuadro

 

[Garfield]

Guys, сould you please help me with two questions? What is the fundamental difference between RS motors and their standard versions? What is the maximum rear tire width/clearance for the CEF69 frame? Thanks in advance for your help!

 

[nvcheeko]

Guys, сould you please help me with two questions? What is the fundamental difference between RS motors and their standard versions? What is the maximum rear tire width/clearance for the CEF69 frame? Thanks in advance for your help!

I have 2.

Guys, сould you please help me with two questions? What is the fundamental difference between RS motors and their standard versions? What is the maximum rear tire width/clearance for the CEF69 frame? Thanks in advance for your help!

Mate, I think the FC4.0 Might have same internals as the RS but Bafang are no longer making FC4.0 standard M510 gone back to FC 3.0, Mine is definitly noisier then the FC2.1 etc

For wheel size i have a 2.6tire on rear im sure you could go bigger.

 

[borysgo2]

I have 2.

Mate, I think the FC4.0 Might have same internals as the RS but Bafang are no longer making FC4.0 standard M510 gone back to FC 3.0, Mine is definitly noisier then the FC2.1 etc

For wheel size i have a 2.6tire on rear im sure you could go bigger.

At the beginning I thought that FC4.0 was noisier than FC2.1 but after about 500km they seem to be similar in noise.
FC4.0 is very smooth with stock tuning.

I am very curious what is the real difference FC4.0 vs FC3.0.

Cheers

 

[Garfield]

For wheel size i have a 2.6tire on rear im sure you could go bigger

Is this for 29"?

 

[Torqshred]

Oops......

First casualty.

 

[ficorama]

Oops......

First casualty.

View attachment 188930

aww! as far as I remember there were similar things on cef50 frames. what is the shaft diameter?

 

[Torqshred]

aww! as far as I remember there were similar things on cef50 frames. what is the shaft diameter?

11.9mm , so about 12mm. And around 81.7mm long... I saw specialized uses a rear suspension pivot bolt thats 12mm wide x 82mm long....

It was starting to creak, so I did a torque check on the bolts and pop goes the weasel!

My frameset has done alot of downhill. Over 1000km on it now.

 

[ficorama]

11.9mm , so about 12mm. And around 81.7mm long... I saw specialized uses a rear suspension pivot bolt thats 12mm wide x 82mm long....

It was starting to creak, so I did a torque check on the bolts and pop goes the weasel!

My frameset has done alot of downhill. Over 1000km on it now.

you can also cut a thread on the side where it broke and put a washer on it. at least temporarily until you solve the axle. or have made from an old 12mm thruaxle.