Orbea Rise H15 Profile 2

[aforestfan]

I'm wondering if someone could send me a picture of profile 2 on default settings.
My lbs set up my motor to 85nm & i would like to set up Profile 1 to the Default settings on 65nm.
Here are my setting for profile 2 on 85nm, loving these setting & it's well with doing.....

 

[Borbea]

Hi, you can‘t get the default settings now as I think all your modes are at 500 Watts. (EP8). Default is eco 150 W, trail 250 W and boost 350 W (EP8 RS).

So even if you set boost to 60 Nm you will have 500 W peak power and not 60 Nm, 350 W. This is what makes the motor more natural and increases the range. Now in 60/500 you have a lot more power at low cadence and much higher consumption.

Unfortunately in shimano e-tube you cant enter peak power settings. Third party app like stunlocker can manage this.

So even if I post the default e-tube profile 2 settings you will have a total different motor behaviou because peak power on your bike is 500 W in every setting. Not 150, 250 and 350 watts.