Search results for query: *

My Bosch speed sensor (I'm guessing that this is the cause of the problem) seems to be playing up. When I start a ride and get into it and hold a high speed, somewhere over 20kph, my speed fluctuates up and down on the speedo causing the motor assist to cut in and out. Seems to settle down...

Had a bit of a 'mare and to cut a long story short after "borrowing' my wifes caliper, as I broke a ceramic piston on my rear caliper, I've managed to mangle the O-rings that go either side of the banjo bolt that is on the end of the brake line that then goes into the caliper. I've order some on...

Mate has just bought a 2024 Sam 6.9 here in Australia, just wondering if anyone out there has mulleted their bike of the same. I've got the 2023, older framed model, and it had a flip chip where the rear axle goes through the chainstay/rear triangle to compensate when you fit the smaller...

Have a set of Fox Factory 38s at 170mm travel on my 2022 Focus Sam, it's coming up to 2 years old and although the forks have been serviced around the 1 year mark was thinking of trying to buy the new X2 damper at 180mm and fitting them up. Wondering if any of you have already been down that...

After watching the first few downhills for the year, just wondering if anyone else out there is intrigued by his 75mm rise bars. Ok so it does look like Dakotah Norton is riding a Raleigh Chopper from the 70's but hey, he's pretty well up there in the standings with the best of them at the...

Looking to overhaul my drive line on my now 2 year old Sam 6.9. Got nearly all the components except the chain ring, looking at buying a Race Face one from Fox Australia as only one I can find but there is a section for chain line in mm's, one is 52mm and the other is 55mm's. Anyone know what...

Got a 2022 Sam2 6.9 with a Fox Van Performance Coil rear shock. Thinking of going down a progressive spring line and have been doing a bit of research and have come up with the following. Cane Creek 450-550lb x 65mm, looks around right as the standard shock came with a 450lb spring. Wondering...

Have posted this elsewhere and over 100 people have looked at it but no reply. Just started looking at Miranda cranks as a replacement for standard cranks that are starting to keep coming loose and there 2 options in the 155mm length that I want to go, they both say that the are compatible with...

Got a creak down in the bottom bracket and it really felt like a pedal on the way out. Checked the pedal and sure enough there was a fair bit of lateral play in it. Tried nipping it up but to no avail, creak still there. Bit the bullet and bought new pedals only to find the creak still there...

Borrowed the wifes Kellys Theos for a mate to ride and we had 4 of us out riding, swapping bikes around as 2 blokes were new to emtb's. While I was on the wifes bike I noticed a clunking coming from the rear end. After having a look noticed that the bolt holding the derailleur hanger to the...

Just a quick one, is it possible through the Connect app to vary the amount of assistance given by the motor in the different modes, ie eco, tour, Emtb and Turbo as you can do on the Shimano e-Tube app?

Had a ball over the weekend riding some of my usual trails and comparing the difference between my old Merida and my new Sam2. Loving it so far, observations so far are; finding the need to get over the front a bit more in those "loose gravel' in tight turns, not sure if its to do with the...

Just received and 2/3 put on my sticker (invisiframe) kit from Bikestickers eu. Must say it has turned out very nicely so far, have taken my time though and some of the pieces have taken 20 - 30 mins to get right with no bubbles and all stuck down. Gave it away after about 3 1/2 hours last...

Just a thought and I wonder if anyone has tried it. I know the bike is designed for down, but I do have a lot of tight single track near home. So was wondering if you left the 29" rear wheel in and moved the flip chip on the axle to the lower position whether the wheel would have enough...

Bike / Product Year: 2019 Manufacturer: Merida Model: e160 900e Size XL Asking Price: $5300 AUD Location Sunshine Coast, Queensland, Australia Description My new bike has arrived so time for the Green Machine to go. Very well cared for 2019 Merida e160 900e in XL size, was top of the...

NEW BIKE DAY TOMORROW!!! Hence the impending lack of sleep, should have been Tuesday but I wanted a Kiox display and controller fitted and they had to get one sent up from Melbourne. Hopefully it arrives in time and it ready in time. I have had a Merida for the past 3 years and after having to...

Have used both the free version and a purchased version for years now and have fantastic results, it's so much better than the Shimano Steps app. But, and it's a big but, I used my paid version to check on a mates battery health on his e8000 powered Norco Range. Since then his motor developed a...

Was hoping for some owner feedback please. At the moment my ride is a 2019 Merida, top of the line e160. After replacing the motor at 3500km, which was out of warranty and was a very expensive exercise at $2000 on a bike that I only paid $5000 in the first place, that second motor has now played...

Well after 3500km got an error code I can't get rid of. Had the odd error code in the past, usually the E013 on start up which displays in a box up on the display but this time it's different. Started with the usual E013 that I couldn't get rid of by turning on and off a few times so did a 10km...

A couple of mates have both bought these bikes for their 'better halves', there seems to be no blue tooth connection with the controllers on there bikes. Great having the new motor but would like to play with settings for them. Is this possible or am I missing something, do you really have to...