I have ordered through Leisure lakes, they supplied the bike. (Orbea Wild) so there is a few week delay as they need a wire from Bosch and an additional mount?
When I ordered the bike, it was an option, I should have taken it at the time.
What did you buy your ebike this week?
- Thread starter Simoto123
- Start date
When I ordered the bike, it was an option, I should have taken it at the time.
Colin1517
Active member
Cheers @VWsurfbum I have a leisure lakes just down the road in Bury, so I’ll be having a chat I think.
In the process of converting my e160 S into a bespoke e160 RSX.....so this phase is the rear shock (Float X Perf Elite).
Also, swapped the dropper lever out as the stock Whyte is not good for me.....also got the pistons on the Hope E3's upgraded to the latest iteration.....
Also, swapped the dropper lever out as the stock Whyte is not good for me.....also got the pistons on the Hope E3's upgraded to the latest iteration.....
Toaster spot on for pannini and a quich. Wrap in tin foil save a bit of washingI'm currently looking at the portable power bank (thanks to this forum) a toasty maker (thanks to this forum) and a night away (thanks to this forum)
I haven't even received my bike yet from YT and i got this baby waiting for it.
Tubby G
❤️🔥 Hot Stuff ❤️🔥
Trying out a Mazza on the rear after ripping a hole in my Double Down DHR
(Yes I know nothing aligns but don’t care.
)
(Yes I know nothing aligns but don’t care.
)
I got one if them a week ago and also a Emartello saves battery power it says on box so must be true. Not fitted it yet. Just be another tyre to me. They all don't seem to last very long before the grip seems to go.Trying out a Mazza on the rear after ripping a hole in my Double Down DHR
(Yes I know nothing aligns but don’t care.
View attachment 134857
Tubby G
❤️🔥 Hot Stuff ❤️🔥
I’ve been out for a ride in the slop today and it was good. Doesn’t match my front Assegai at all, especially as it has a grey tan wall, but heh ho I won’t lose sleep about it
I had a tan wall one it didn't last long at all before the grip got poorer
Semmelrocc
E*POWAH Master
A fresh pair of 510s for the coming season.
Match the tan wall tyres
Ark
Active member
mine doesn't seem that good either. the cable keeps slipping or something.
Never occurred to me that I could just get a new lever, hopefully one that feels better to press.
oof not that cheap are they, might get a hope one in red
Last edited:
JStrube
Active member
what a bonus!
So that fits a levo levo . My Praxis look pretty crapSo after much research and wondering..I've taken the plunge and decided to get the Mincing sorted..I've struggled so hopefully I'll now be that guy at work with the walk
Hope 155s not cheap at £175 but Hope do it right..lovely quality
View attachment 134982 View attachment 134983
Semmelrocc
E*POWAH Master
Some fresh "jewelry" for the coming season. Not as fancy as a XX1, but a decent bargain for sub 80 €.
Harry Vandsome
Member
A sibling 
Tyjay
Member
Zeb ultimates A2
Now then should I do I lower leg service before fitting in Saturday
And does anyone know of this is basically the same as maxima plush light? The spec is nearly the same
Thanks
Now then should I do I lower leg service before fitting in Saturday
And does anyone know of this is basically the same as maxima plush light? The spec is nearly the same
Thanks
Last edited:
I got my first full fork service last year well overdue. All gobbledygook to me but i was told a few settings / things were not as they should have been. So your not as OCD as you like to think. EnjoyZeb ultimates A2
Now then should I do I lower leg service before fitting in Saturday
And does anyone know of this is basically the same as maxima plush light? The spec is nearly the same
Thanks
View attachment 135413
Tyjay
Member
A
ot of forks come over greased or under oiled. So was debating wether to do lower leg before riding
ot of forks come over greased or under oiled. So was debating wether to do lower leg before riding
I did when I got my Zeb A2
Tyjay
Member
Cheers mate think I will as well
A New pair of WYB STI30s and inner tubes because after 5 attempts at sealing the rear I gave up .
But running Eddie currents so pinch flats isn't going to be a thing.
Also a e-stop magura rear brake and Galfer purple pads.
Just need to find a Fabric tool bottle .
But running Eddie currents so pinch flats isn't going to be a thing.
Also a e-stop magura rear brake and Galfer purple pads.
Just need to find a Fabric tool bottle .
Tip given to me by a mech at a LBS. Get a cheap large dustbin (I got one from Homebase) and put a large bin bag inside it. Then pull off the lower fork legs over the dustbin then the oil drops into the dustbin. Didn't bother to check how much grease was in them, but what there was was concentrated in lumps, probably through storage.
Blimey, you can get a a litre of Castrol 0w30 for less from Halfords!Zeb ultimates A2
Now then should I do I lower leg service before fitting in Saturday
And does anyone know of this is basically the same as maxima plush light? The spec is nearly the same
Thanks
Super Deluxe Ultimate (Upgraded)
(Upgraded)
So after much research and wondering..I've taken the plunge and decided to get the Mincing sorted..I've struggled so hopefully I'll now be that guy at work with the walk
Hope 155s not cheap at £175 but Hope do it right..lovely quality
View attachment 134982 View attachment 134983
Well after trying the new Hope mincer megastar cranks I can confirm I didn't notice any difference
So not really a good investment but they do look good so an absolute bargain
Similar threads
EMTB Forums
Latest articles
-
The lightweight Canyon Neuron:ONfly CF is here!
Finally, Canyon is out with their first mid-assist, lightweight emtb...- Knut Nes
- 6 min read
- Views: 1K
- Reaction score: 5
- Comments: 4
-
New Sight VLT and Range VLT joins the 2024 Norco lineup
How many full-power emtbs have been launched this year? Yeah, Merida...- Knut Nes
- 2 min read
- Views: 4K
- Reaction score: 2
- Comments: 2