Will blevo always show the correct total distance of the motor? Or will it only start tracking correct distance from the day I bought blevo?
The Official BLEvo Thread
- Thread starter Rob Rides EMTB
- Start date
- Status
@PaoloBLEvo is it possible to add acceleration adjust and shuttle mode to eco trail and turbo modes so they can be adjusted differently for each mode?
The total distance is stored in the motor, not in the App. If the the speed is hacked this value is wrong. What BLEvo does is to adjust this value in function the speed hacked, but can be wrong because it depends from when the speed was hacked..
It is already in the TODO list..
Okay, I thought that was the case then.
I'm not sure when mine was hacked so will have to use BLevo to track from now on then
I input my correct circumference and will be going for a ride of 60kms today to test out again. Thanks!Maastricht
E*POWAH Master
Hi Paolo,
Thanks for all the updates!
I watched the video and via auto translate I understood about 70%. I think I only missed the part where you imported all my tinder matches as waypoints? My wife will going to miss me for long time this summer.
Last edited:
Maastricht
E*POWAH Master
Previous post was just a joke Paolo!Hi Paolo,
Thanks for all the updates!
I watched the video and via auto translate I understood about 70%. I think I only missed the part where you imported all my my tinder matches as waypoints? My wife will going to miss me for long time this summer.
View attachment 9522
The GPX tracks I used here are official mtb tracks in the southern part of The Netherlands. They are distributed by our tourist agency. Our tourist agency likes to add a lot of waypoints like bars, restaurants, hotels, etc. As you can see below the new BLEvo "hide waypoints function" works extremely good:
So here you only have left all the start and end points of each route. This new function offers me a lot of value while I am now very easily able to start for example on the orange route then jump to the red route where they touch each other and so on and so on. With my new Levo I already see that where I normally rode one track with my non assisted bike, I now easily ride two trails.
Thanks for your support and keep up with all the good work!
neils
Well-known member
Will Landscape option become available for iOS? (iphone X latest updates applied)
Thanks
wildsau2
Active member
we
we all live in the us ?
Thanks for the feedback.
Enjoy your ride with music..
Yes you get correct tracking when you use BLEvo and change speed limit.
I just watched it in Italian - couldn’t understand a word but it sounded very relaxing and looked good
Maastricht
E*POWAH Master
You can use the following settings but these are only available when watching Youtube via a computer but NOT via the Youtube app on a mobile device:
Left of Youtube icon select settings button, then select subtitels -> arrow to right and then choose automatic translate into your prefered language:
For example english:
Now subtitles are automatically translated:
Last edited:
Just bought my Kenevo 2019 ...well 2018 . and thought MC was a load of crap and really disappointed .
so now i have paid for BLEvo and only at this moment want to just get a little extra speed 35kph .
I use my own garmin 1030 , a seperate speed sensor and cadence sensor on the crank .
so am i correct in saying it wont matter what the wheel size is set to in MC app i will get the correct speed and cadence ?
I'm not fussed for power meter readings as cadence does a virtual reading of that . and i only ever use power readings for when im out on the road bike or my home trainer .
I bought the keneveo for pure fun only not to be serious .
Brilliant app by the way and love how you can set your own 3 user settings.
Thanks
so now i have paid for BLEvo and only at this moment want to just get a little extra speed 35kph .
I use my own garmin 1030 , a seperate speed sensor and cadence sensor on the crank .
so am i correct in saying it wont matter what the wheel size is set to in MC app i will get the correct speed and cadence ?
I'm not fussed for power meter readings as cadence does a virtual reading of that . and i only ever use power readings for when im out on the road bike or my home trainer .
I bought the keneveo for pure fun only not to be serious .
Brilliant app by the way and love how you can set your own 3 user settings.
Thanks
How much can BLEvo control “Acceleration” on the 2019 Levo with TCU v. 2.019?
I have a 2018 Levo and am considering getting a 2019 model in order to take advantage of the new 700WH battery. My early 2018 model runs battery firmware v. 2.22.3 that allows setting Acceleration from Eco to Race. I like using the higher Acceleration levels in Mission Control and with BLEvo. Specialized “dumbed down” the Acceleration with Infinite Tune v. 2.23 so max Acceleration was fixed at the Eco level (presumably for safety/liability reasons).
My question is whether BLEvo overrides Specialized’s Acceleration control and allows settings similar to those in v 2.22 (i.e., up to the old Race value). The Acceleration slider bar is shown on the BLEvo Settings page with v. 2.019, but I’m not sure whether the range is similar to that of v. 2.22 or whether it has a maximum value similar to v. 2.23 (Eco) and only goes down from there.
Paolo? Anyone who has made the comparison?
Thank you!
I have a 2018 Levo and am considering getting a 2019 model in order to take advantage of the new 700WH battery. My early 2018 model runs battery firmware v. 2.22.3 that allows setting Acceleration from Eco to Race. I like using the higher Acceleration levels in Mission Control and with BLEvo. Specialized “dumbed down” the Acceleration with Infinite Tune v. 2.23 so max Acceleration was fixed at the Eco level (presumably for safety/liability reasons).
My question is whether BLEvo overrides Specialized’s Acceleration control and allows settings similar to those in v 2.22 (i.e., up to the old Race value). The Acceleration slider bar is shown on the BLEvo Settings page with v. 2.019, but I’m not sure whether the range is similar to that of v. 2.22 or whether it has a maximum value similar to v. 2.23 (Eco) and only goes down from there.
Paolo? Anyone who has made the comparison?
Thank you!
Sorry but I don't understand very well your question..
The Levo 2018 has the firmware battery x.22 or x.23.. the new version of Mission Control doesn't change the acceleration value due to safety reason. BLEvo can do only with firmware x.22. If you open mission control, the value is restored to ECO.
In the Levo 2019, the acceleration is totaly different. You can have a percentage from 0 to 100% with BLEvo. In mission control you can have only 6 values in step of 20%.
And I don't remember if the TCU 2.019 handles correctly this value. The TCU 2.025 for sure does it.
It this what you want to know?
The Levo 2018 has the firmware battery x.22 or x.23.. the new version of Mission Control doesn't change the acceleration value due to safety reason. BLEvo can do only with firmware x.22. If you open mission control, the value is restored to ECO.
In the Levo 2019, the acceleration is totaly different. You can have a percentage from 0 to 100% with BLEvo. In mission control you can have only 6 values in step of 20%.
And I don't remember if the TCU 2.019 handles correctly this value. The TCU 2.025 for sure does it.
It this what you want to know?
Thank you, Paolo. I apologize for not making myself clear.
Is BLEvo “100% Acceleration” on the 2019 Levo the same as “Race Acceleration” on the 2018 Levo with firmware v. 2.22.x?
Or, is BLEvo “100% Acceleration” on the 2019 Levo the same as the default acceleration on the 2018 Levo with firmware v. 2.23.x using Mission Control?
(I believe this default value is equivalent to “Eco Acceleration” on earlier firmware versions.)
Basically, what I want to know is whether I will be able to set the Acceleration on the 2019 Levo to give the same rapid responsiveness as when I set Acceleration to “Race” in Mission Control with v. 2.22 or to “Power” using BLEvo with v. 2.22 on my 2018 Levo.
If it ever stops raining here in “sunny” Southern California I hope to be able to test ride the 2019 Levo and compare Acceleration and responsiveness with my 2018 Levo. I really like the tunability of v. 2.22 with BLEvo, and I am hesitant to give that up.
ayyyee paolo! i finally BLEvo’d today! superfun. all the data displayed so nicely, i just tried basic setting, but it felt great. haven’t synced my polar yet for heartrate, or tried smartpower but layout is great. i have a 2017 with .23 - i set my wheel circumference the way you said. thank you sir? good times... cheers! salud! ?
Sorry but I don't have the Levo 2019, and I cannot compare the 2 acceleration system. Maybe someone already did this comparison.
Hi BLEvo guys, are you riding with BLEvo and the new navigation system? What you think? Are there some improvements to do? For sure, yes... let me know..
weather has been terrible here in cali. will have some feedback for you after this weekend for sure.
i got my display arranged nicely. will sync my polar chest strap today.
i’ve used the street map to see where i am, but will try to nav on trails tomorrow? thanks paolo!
LevoLover7
Member
well - ok, and when does Paolo finally get the hack, that with FW 6.1.0 and 19b you can adjust the wheels size with BLEvo as usual, as with the 2018 model? Or is it really technically impossible? I can not believe it, nowadays everything is hacked. Did not follow the topic anymore.
Sorry to bother, I know you said that the mileage on the MOTOR in mission control is not right if speed is hacked. So do I need to limit it to 25kmh to get it right or just have the right circumference set in BLevo? Also, does blevo track total mileage since downloading it?
Gogogordo
Member
It
I like how you can "play" your route and see how the bike performed throughout your ride.
Excellent work maestro!!
It seems to be working good Paolo!
I like how you can "play" your route and see how the bike performed throughout your ride.
Excellent work maestro!!
Thanks, but the navigator system is another thing.. it is the map shown during the ride where you are able to follow a GPX with the waypoints used for navigation indication.. what you are talking is the map of the tour after the ride... if I understood well..
The total mileage is stored in the motor and if the speed limit is hacked, the value will be wrong.. but during the ride, BLEvo will show the right values... speed and km..
Hi Paolo, thanks for the reply. I understand this point from a previous question. I was wondering whether Blevo tracks your "new" total distance somewhere? I know it tracks your distance per ride but is there a total counter somewhere?
No.. the total counter is not present in BLEvo.. I don't want to add it because it could be wrong.. it is better to use Strava for tracking the total km..
- Status
