I also dont find it to buyinteresting, but how we can order (invalid in site) ?
I also dont find it to buyinteresting, but how we can order (invalid in site) ?
it seem we can find it on aliI also dont find it to buy
On mine, I put some cable ties around the cables where they exit above the motor. The motor is a tight fit and you will kinda need to pull the cables off to one side as the motor is inserted.How did you guys manage the cables runing through the frame? I have not built the complete bike yet, just inserted all the cables (not sure how you say in english, bowdens maybe? (for rear derauiller) and brake hoses and when pulling the rear fork all the way up, both brake hose and derauiler cable move through the entire frame all the way up to the headtube. I can screw those holders behind the battery to hold the cables in place, but would this be ok in the long run?
Thanks.You can save on the cranks by using Bosch gen 4 cranks. Many options of different length out there. Also not sure,but I think m500/m600 spider should fit m620. Please correct me if I am wrong as I don't own an m620 myself
No, dont fit.Thanks.
Any first hand info from someone, if these chainrings, intended for Bosch gen4, would also fit bafang m620 perhaps:
UNITE COMPONENTS Chainring Direct Mount Bosch Gen 4 | Graphite Black, 63,03 €
UNITE COMPONENTS Chainring Direct Mount Bosch Gen 4 | Graphite Black The still relatively young British brand Unite has taken up the cause of producing 99%r2-bike.com
Thanks!
Hey thanks for the reply, I'm not entirely convinced the battery compartments are the same size on the e10 vs e22 though. A user in this thread was able to make a 14s4p 21700 battery that mounted in place of the stock one and retained the stock mounting mechanism which looked like it took a fair amount of space up. My thought was that if I removed that hardware I would gain more room. Your battery does look pretty tight though. How do you mount the bottom cover to your frame without the battery stuff?Two answer some of your questions:
I have built a soft case battery for dengfu E10 size Large which by the looks is identical to the one of e22. I am convinced that 14s4p is the absolute maximum you can fit there without cutting the frame. Even fitting that battery was not easy, I had to push it in millimeter by millimeter.. the available compartment length is under 44cm.
Also had to be careful with BMS height and choose 10mm tall instead of 15mm. I am attaching some photos to give you an idea.
As for the waterproofness of the frame, you will definitely need to work on that, mostly around the battery cover but also cable ports. I used some black silicon, but mostly relying on having the pack waterproof.
Now I also want to ask you why do you want to use an external controller and will it have pedal assist? The stock controller gives around 1700w peak which imo is plenty for an ebike. You might also want to check custom Innotrace controller.
View attachment 103631 View attachment 103632 View attachment 103633
Thanks for the reply, your post about this battery originally was one of the reasons I was considering doing it. And like you say, when I'm mostly on the street and the trails near me are only up to blues so nothing to serious. And I do think the Innotrace x1 would overall be fine for me but the price tag here in the USA means I could get a really nice feature packed external powerful controller and save a lot of money, just makes more sense for me to go that route. Can you confirm the max length with the stage removed and just to confirm you have a large frame?View attachment 103642
My friend said this is his E10 frame inside direct from dengfu. So no stages. And I have to say the stages inside the e22 are realy tight and small so I rly dont think it make a differenz when you remove it. Also when you ride mostly street.
okay, I'm an idiot - its fineHey Folks
Sorry I've not been around, I got struck down with COVID and haven't been doing much of anything recently...
Anyway, I’ve finally got my battery back from the builders today, with great excitement I plugged it in.
Bike powers up, brake sensors show on display etc, battery voltage reading correctly etc, but I’m getting no power from the motor.
I’m suspecting that I got a duff controller in the motor, but any tips for trouble shooting would be appreciated.
Cheers
What battery do you have? I've just squeezed a 20Ah 52v battery into my E22...I know that I am littering the thread, but I just finished my e22 build with the innotrace motor and I have to say it really is amazing! The power is insane, even at pas levels 1 or 2, and when you press the throttle it just floors the seat and accelerates to 50 kmh almost no matter in which gear you have it
But it also floors the battery, the consumption was insane, probably because we were all pushing it hard on the first runs. So the next build should be e55 frame with custom battery.
I designed and printed my own case:I bought it from dingtai batteries on aliexpress. It is in the original case, 52V, cca 17Ah, 40A.
You made yours yourself or you bought it somewhere?
I want one super bad but i am terrified that they will mess up my shipping to usa. i just feel so uncomfortable with their german website since payments are not credit card? and usa is not in the drop down shipping menu. anyone have any advice?I know that I am littering the thread, but I just finished my e22 build with the innotrace motor and I have to say it really is amazing! The power is insane, even at pas levels 1 or 2, and when you press the throttle it just floors the seat and accelerates to 50 kmh almost no matter in which gear you have it
But it also floors the battery, the consumption was insane, probably because we were all pushing it hard on the first runs. So the next build should be e55 frame with custom battery.
I thought USA customers have to buy through wattwagons or something. And pay double. Some kind of deal.I want one super bad but i am terrified that they will mess up my shipping to usa. i just feel so uncomfortable with their german website since payments are not credit card? and usa is not in the drop down shipping menu. anyone have any advice?
This was my understanding as well, try to order one on innotrace's site and USA isn't listed as a shipping location. Maybe they will do it if you send an email?I thought USA customers have to buy through wattwagons or something. And pay double. Some kind of deal.
I got an invoice from them after debating through email about the parts, so there is definetly not necessery to make an order via online shop, so give it a try with an email with what you need together with shipping.This was my understanding as well, try to order one on innotrace's site and USA isn't listed as a shipping location. Maybe they will do it if you send an email?
The World's largest electric mountain bike community.