@pushkar Do you know any new information when a controller or either a whole M500/M600 is going to be available from Innotrace? I am based in Czech Republic and i would like to swap the stock M500 on my bike for something more powerful as soon as possible. Battery is 36V 630Wh but i have a feeling that the motor is getting weaker after less than 90% of battery charge - feels like there is some sketchiness in the bafang firmware because i have ridden it also during morning in 5 °C when motor was barely warm so it shouldn't be anything heat related.
Bafang M500 and M600 motors
- Thread starter Rob Rides EMTB
- Start date
Please reach out to Innotrace. We are getting our first batch in a couple of months so I am sure they can hook you up by late April.
The torque sensor is in the motor, the speed sensor is external. No chain. The display is a monochrome IIRC.
Afaixeda
Member
Hi mate,
I have a frame E10 and ordered 4 month ago a M600 unlimited speed and 860C screen from CNbikes china.
The engine M600 now models Model Year 2021 are more silent with plastic gear, that is reconfirmed by CNbikes.
I hope to receive the engine M600 shortly and be able to share my experience
Regards
Afaixeda, did you order all 3 items (E10 frame, battery, and motor) from CNbikes?
Afaixeda
Member
Good morning mate,
No, from CNebikes on alibaba only buy a Bafang motor kit M600, this seller gave me the option to buy the motor with the digital display 860C and unlimited speed.
But so far I can not recommend this seller, make the payment on 26/11/2020 and as of today I have not received...the agent contact it have very good atention.
The tracking number that they have provided me does not show any movement, they inform me that in 10 days I will receive it, I hope it will be like that and I can share the information
Regards
I would say realistically it is priced similarly to the current X1 upgrades for the ultra ($500-$700, depending on wattage )- but we are looking at scaling up and reducing our cost to do this. More we can develop, the better we can do on the price.
To my knowledge, besst is also a $200-$250 investment and requires the user to have some experience with programming. The Archon X1 / X2 programming is simple, and very intuitive.
Were hoping to get it done sooner. Just production delays.
To my knowledge, besst is also a $200-$250 investment and requires the user to have some experience with programming. The Archon X1 / X2 programming is simple, and very intuitive.
Were hoping to get it done sooner. Just production delays.
Dear lord, its almost half price of my bike. I have no issues with programming, i tuned cars, gasoline, lpg, wrote applications and now i only like to have possibility to derestrict and restrict a bicycle on-demand - would like not to bump up the power because i would like to keep 250W restriction for legal. Derestricting of speed i need only to have fun on non-public roads (derestrict on non-public is legal in my country), and i have a lot of theme where i live.
How the installation of this looks?
And question about besst - is that possible to move configure the restrictions to be set from display? it was possible as far i know for bbsXX engines.
How the installation of this looks?
And question about besst - is that possible to move configure the restrictions to be set from display? it was possible as far i know for bbsXX engines.
Animalector
Active member
No you can't change the speed from the display. Even with the BESST tool there is no setting to allow this feature.
The speed is changed through the BESST interface in the motor settings tab
Lucky Pete
Member
Is there a walk mode in the M600?
RyeNiel
Member
I don't think so
RyeNiel
Member
Is it safe to spray water to the motor when washing the bike?
If you perform necessary to prevent and manage water infiltration. no problems; i washing mine with karcher (low pressure) without any problems. It is explained some where
Mabman
E*POWAH Elite World Champion
The M600 is actually throttle-able and the reason it has been on my radar since it was introduced 3 years ago. For my own reasons I would not own an eBike without a throttle, and no it is not to preclude pedaling.....makes a very handy walk mode however that needs no secret handshake to get going and doesn't allow for the cranks to go round and round at the same time whacking you in the calf.
CRFan1
Active member
Yes, the M600 has a walk mode but I forget how to make it work because I never use it....
Lucky Pete
Member
Cheers, if you work it out again can you please let me know as I really dont want to run the throttle as hoping to sneak it under the radar...
CRFan1
Active member
Here you go....this is for my X1 with M600 but hopefully it applies for your:
Walking Mode
Repeatedly press Down until the walking mode icon is displayed. Then press and hold Down for 2 seconds and the motor will move the bike along at a walking pace. To stop, release the Down button.
Note: You do not need to use the throttle while using Walking Mode. Doing so may cause the bike to leap out of your grip.
The Unofficial Luna X-1 Enduro Display Manual
An unofficial manual for Luna Cycle’s awesome X-1 Enduro e-bike.
bradland.github.io
Lucky Pete
Member
Thanks CRF!
Similar Threads
-
-
-
-
-
Need firmware for Bafang M620 UART because LVC current ramp down- Started by tocotronix
- Replies: 4