Strive77
Member
Just outside of Chorley near Rivington. This pic is Great Hill, all easy riding distance.
Nip over from Van for a ride.
My Decoy Leaning on Stuff
- Thread starter Jpzeroday
- Start date
Nip over from Van for a ride.
Singletrackmind
Well-known member
Awesome ride on hero dirt today at Anderson Truck Trail @sandieocalifornia. Suspension on Decoy is really dialed in. Push ELEVENSIX coil shock and DSD Runt on Fox 38 fork really makes the duck shine!
Chrysaor
Active member
Relatively dry day in Brittany
Strive77
Member
Top of Garburn pass decent in the Lake District today. Full on Lakeland rocky dh
Chrysaor
Active member
Waiting for a lighter spring, new tires for wet conditions and a 1.5degrees angle headset
Mouse Jockey
Member
My dog and a duck. Points if you guess the location.
Mouse Jockey
Member
I know where you are.
Yesterday was more hero dirt. Got to take advantage of it here in SoCal. 
militantmandy
Well-known member
Conditions here are all time prime. I absolutely love this bike!
Mouse Jockey
Member
Rode up Cannell Plunge - Mix of Hike a Bike using "walk" mode and just lifting 50 pounds over rocks, and Boost mode and Trail mode.
Skylar and I made it to the top at just under 10 miles. Range showed I had 17 more miles to go in trail mode and 7 more miles to go in Boost. It was another 14 miles to Sherman pass. We turned around and went back down 4,600 foot pure DH descent. 20 miles of that type of riding is my limit. And Skylar's. We were D-U-N. Done. Bike handled it great.
Skylar and I made it to the top at just under 10 miles. Range showed I had 17 more miles to go in trail mode and 7 more miles to go in Boost. It was another 14 miles to Sherman pass. We turned around and went back down 4,600 foot pure DH descent. 20 miles of that type of riding is my limit. And Skylar's. We were D-U-N. Done. Bike handled it great.
skinipenem
Member
Leaning
His_Turdness
Active member
My Duck at the docks.
Don't have any mountains or even big hills anywhere near me, but my neighborhood fishing docks aren't too shabby for a lean. After running the dog for a good 10k I took a quick ride through nearby trails. The ride would've been super quick if it wasn't for the constant roots. Really need to get the coil shock to make the bike faster through that terrain. Stopped for the sunset and fresh sea air. Always a good pic by the sea.
Don't have any mountains or even big hills anywhere near me, but my neighborhood fishing docks aren't too shabby for a lean. After running the dog for a good 10k I took a quick ride through nearby trails. The ride would've been super quick if it wasn't for the constant roots. Really need to get the coil shock to make the bike faster through that terrain. Stopped for the sunset and fresh sea air. Always a good pic by the sea.
Chrysaor
Active member
Escaping the crowd at les portes du soleil by riding on the Swiss side where the lifts are already closed !
Range anxiety the whole day but I’ve done a little bit more than 1500m elevation in eco with one battery so all good
Range anxiety the whole day but I’ve done a little bit more than 1500m elevation in eco with one battery so all good
Sapientiea
Active member
did you wrap or paint it?
I wrap it! ...and i have change the fork Liryk with RS Zeb ultimate 3.0. The coil it was painted.
Sapientiea
Active member
I like it
Where did you get the wrap parts from? And did you apply the wrap yourself?
Last edited:
skinipenem
Member
Looks awesome!
This is what I used!I like it
Mat Metalic Mov GLS MC003 - Folii Autocolante Auto - Oferta
Cauti un autocolant auto de calitate? Mat Metalic Mov GLS MC003 este o folie auto speciala, rezistenta si durabila! Preturi avantajoase!
accesoriiautobrasov.ro
And for cut the folia:
Fir Wrapcut 3mm x 60m GLS WRP3 - Kit Aplicare Folie Auto
Fir Wrapcut 3mm x 60m GLS WRP3 - IN STOC - Vezi stocul nostru de produse de aplicare a foliei auto! Preturi avantajoase! Contacteaza-ne!
accesoriiautobrasov.ro
Everything you see on my bike I made myself! I worked for about 7 hours. I used the cutting wire to cut the foil from the bicycle straight and with edges.
Sapientiea
Active member
This is what I used!
Mat Metalic Mov GLS MC003 - Folii Autocolante Auto - Oferta
Cauti un autocolant auto de calitate? Mat Metalic Mov GLS MC003 este o folie auto speciala, rezistenta si durabila! Preturi avantajoase!
And for cut the folia:
Fir Wrapcut 3mm x 60m GLS WRP3 - Kit Aplicare Folie Auto
Fir Wrapcut 3mm x 60m GLS WRP3 - IN STOC - Vezi stocul nostru de produse de aplicare a foliei auto! Preturi avantajoase! Contacteaza-ne!
Everything you see on my bike I made myself! I worked for about 7 hours. I used the cutting wire to cut the foil from the bicycle straight and with edges.
Thanks for the info, I will have a look to see if I can also do this
Strive77
Member
Leaning up at two lads Rivington Lancashire UK
Chrysaor
Active member
Close to Fennematt in Les Vosges, France
