Levo Gen 3 extender

z1ppy

z1ppy

E*POWAH Master
Joined
May 11, 2018
Messages
240
Reaction score
169
Location
West Mids
Hi @TrailwattsUK,
I can see you've added an extender to the Levo Gen 3 bike your selling on your online store, is it the same as the Levo Gen 2 version?
I fancy buying one for my current bike (Levo Gen 2) but plan to move to the Levo Gen 3 at some point and obvious would want to move the extender to the new bike. Is it the same model or is the wiring different? (could it be updated later?)
 
⚡ EMTB Pro Go Pro — Living Intelligence Reports, exclusive discounts & ad-free Up to 25% off Peaty's, PEMBREE, Magicshine & more · Ad-free browsing · Pro badge See the deals →
The harness is completely different in the Gen 3 bikes. Would have to be a fresh loom for the Gen 3 bike if you switch and the stock looms are £249.99 before adding module etc.
 
Cheers for the reply @TrailwattsUK, that‘s a pity as I was under the impression the motor was basically the same as the gen2, I had hoped it would be a straight swap, but life is never straight forwand. Are you selling the Gen3 version of your extended yet, as it’s not listed on your site? (Any sort of price indication?)
 
z1ppy said:
Cheers for the reply @TrailwattsUK, that‘s a pity as I was under the impression the motor was basically the same as the gen2, I had hoped it would be a straight swap, but life is never straight forwand. Are you selling the Gen3 version of your extended yet, as it’s not listed on your site? (Any sort of price indication?)
Click to expand...
I am fitting the system to customers bikes. Depends on location etc regarding price.
 
Do you have a picture of what the harness port looks like when you want to go for a ride without the extender?
 
Gyre said:
Do you have a picture of what the harness port looks like when you want to go for a ride without the extender?
Click to expand...
3D4BA7A7-73A4-4CD7-8CB0-5DB9A6DDC088.jpeg
 
Gyre said:
Many thanks. No plans at this time for a removable extender cable?
Click to expand...
Due to the space within the bike, I could make the link cable removable but you will need to remove the factory battery to access the connector.
 
TrailwattsUK said:
The harness is completely different in the Gen 3 bikes. Would have to be a fresh loom for the Gen 3 bike if you switch and the stock looms are £249.99 before adding module etc.
Click to expand...
Hi can send me the link for the ext ? I’m gen 3. Can it be install by own self ? I’m from Singapore
 
kntr said:
Can you explain?

Does the trail watts battery drain first?
How does the battery percentage read on the TCU?
How do you charge the battery?
Click to expand...
Trailwatts battery load shares between the main battery through discharge cycle.
You will not see the Trailwatts battery as not integrated to firmware (invisible to bike)
Trailwatts battery has its own charger and charge port on battery.
 
TrailwattsUK said:
Trailwatts battery load shares between the main battery through discharge cycle.
You will not see the Trailwatts battery as not integrated to firmware (invisible to bike)
Trailwatts battery has its own charger and charge port on battery.
Click to expand...
Thanks! Sorry so many questions. Hopefully this helps others too.

How much does the complete kit weigh?
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    671K
    Messages
    41,230
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top