Changing display...need assistance.

[MOTO13]

I bought a 2021 Husqvarna HC7. It has the stock shimano E5000 non-blue tooth display. I want to convert to the SC-E8000 display, but need to know what wiring I will need to do this.

 

[flash]

Check if you have a 5000 or 5003. Same display, different wiring. Will make a big difference to what parts you need.

If you have an EP8 motor you can't connect the e8000 display. Even if you could the BT on this display is limited. You want the newer e800 display and the e800 left switch. details here...

https://si.shimano.com/api/publish/storage/pdf/en/sm/E-BIKE_CAT/SM-E-BIKE_CAT-000-ENG.pdf

Gordon

 

[Spiff]

If you have an EP8 you need display SC-EP800, it has color and BT. This display and EP8 use the new cables EW-SD300 which are thinner than the old ones EW-SD50, and not compatible.

There are adapters to convert from EW-SD300 to EW-SD50, they are the Shimano EW-AD305

 

[MOTO13]

Thanks for the information again guys. I thought it was the sc-e8000 display. Apparently there is an sc-e800 display and I misunderstood this. One less zero. My bad. I called Wheel and Sprocket. Matt is going to install this for me when the new display comes in a week or two. He is pretty much the EMTB guru for them. They are also a Shimano warranty and expert service dealer. I will relay this information to Matt. Thanks again.

 

[Jeremybub]

I’ve been looking at doing this upgrade on the HC7, please keep us post on the total cost of the upgraded unit when You have it complete, thanks

 

[MOTO13]

I will. The stock display I believe is a e5000. I need the sc-EM800 model to be compatible with the EP8 motor from my understanding. Hopefully this goes smoothly.

 

[eMullet]

Also Shimano Steps SC-E7000 Display works with EP8 and it's has bluetooth. The Spectral CF7 come with EP8 and that display.

 

[Spiff]

Also Shimano Steps SC-E7000 Display works with EP8 and it's has bluetooth. The Spectral CF7 come with EP8 and that display.

But connectors are not compatible with EP8 cables and will require adapters

 

[eMullet]

OK so they are installed by Canyon, nice to know. I replaced with EW-EN100 and that works also it also needs the adapter?

 

[Spiff]

OK so they are installed by Canyon, nice to know. I replaced with EW-EN100 and that works also it also needs the adapter?

Yes. It is required to use adapters, if you pull some cable out of the frame you will see a thinner cable and an adapter that connects both cables.