Recent content by jallabanan

  1. J

    Kenevo Gen1 Kenevo Comp 2020 - engine bearings?

    The weird thing is, I don't think they have opened anything. I presume they probably recognize the sound from previous cases. Btw. I bought the bike 2 years and 3 weeks ago, so warranty is out anyway?
  2. J

    Kenevo Gen1 Kenevo Comp 2020 - engine bearings?

    Great, thanks. Very likely some water has gotten inn there, as I live in a very wet area.
  3. J

    Kenevo Gen1 Kenevo Comp 2020 - engine bearings?

    Thanks, but didn't really answer my question; do you know if there is any chance of catastrophic failure if I don't change them, if they are worn down?
  4. J

    Kenevo Gen1 Kenevo Comp 2020 - engine bearings?

    Hi, A very slight cracking sound is coming from the crank on my Kenevo Comp 2020, mostly when it hasn't been used in a while. Bike shop tells me it's the "engine bearings" that needs a change. Problem is they are having issues with getting parts, and I've planned a eMTB holiday in a week+...
  5. J

    Kenevo Gen1 Fox float 38 Factory Grip 2 29" 180mm, 44 rake - will it fit Specialized Kenevo Comp 2020?

    https://www.ridefox.com/family.php?m=bike&family=38 I am pretty sure it will, just want to make sure before I press "Buy it now" :D Thanks!
  6. J

    Kenevo Gen1 Turning on issues - pushed in connector pin? (Kenevo 2020 Comp)

    Thanks! I'll try and clean it up properly. English is not my first language; can you please explain "chamfered face"?
  7. J

    Kenevo Gen1 Turning on issues - pushed in connector pin? (Kenevo 2020 Comp)

    Hi, I am having some issues when turning on my Kenevo 2020 Comp. More specifically, randomly it won't turn on, but it stays on if it does. I just noticed one of the pins in the Rosenberger connector was pushed in a little - or worse, a bit of it broke off. If it's just pushed in, is there...
  8. J

    Mission Control app not connecting - Kenevo 2018

    I am shamelessly going to bump this. Anyone with ideas?
  9. J

    Mission Control app not connecting - Kenevo 2018

    Hi, The Mission Control app will no longer connect to the bike. It just says "Connecting" - and then disconnects immediately Look at this video: Dropbox - Screen_Recording_20200408-154052.mp4 - Simplify your life Phone is Samsung Galaxy S10 / Android. Location service is on and approved for...
  10. J

    Dropper question

    Hi guys. Just a quick dropper question. Will this one fit in 170mm (505mm) on my 2019 Kenevo? I honestly just need some quick and cheap replacement...I know it kinda sucks, I just don't have a lot of money right now. Crankbrothers Highline 3 Telescopic Seat Post Ø34,9mm black | Gode tilbud...
  11. J

    Kenevo Gen1 Official 2020 Kenevo Owners Thread

    Hi guys. Just a quick dropper question. Will this one fit in 170mm (505mm) on my 2019 Kenevo? I honestly just need some quick and cheap replacement...I know it kinda sucks Crankbrothers Highline 3 Telescopic Seat Post Ø34,9mm black | Gode tilbud hos bikester.no Thanks!
  12. J

    Shorter Crank Arms on Levo / Kenevo?

    Never mind. Just had to use more power?
  13. J

    Shorter Crank Arms on Levo / Kenevo?

    Ok, stupid question coming up. Which one of these do I turn to remove the arm? Outer or inner? I've tried to turn the inner one, and it loosens, but only for half a turn, and it's completely tight again?
  14. J

    Kenevo rear wheel bolt coming loose

    Quick update. I believe @dutchi had the correct answer here. It turns out the nuts (there are two of them, one black and one chrome) on the hub itself were loose, creating space between the cassette and the rim itself, leaving less space for the bolt. This was not very obvious, even though...
  15. J

    Kenevo rear wheel bolt coming loose

    Thanks guys! Can anyone please take a picture similar to the first one i posted, or even better, measure the axle like I did? I'm thinking perhaps the bike shop messed up and put in a (shorter) axle from a different Specialized bike?
Top