Shenzhen Zhaosheng Carbon CEF52 using Shimano EP801 motor

[MrFixit]

Finally, it’s completed. It’s a ‘cheap’ build with used or ‘new old’ kit. I Have only been out for a few non technical rides, it rides well, but I have to put quite a bit of effort in to get the best out of it. It’s noisy compared to either of my Bafang motors (M510/M820). It weighs 23 kilos.

 

[jbc]

Finally, it’s completed. It’s a ‘cheap’ build with used or ‘new old’ kit. I Have only been out for a few non technical rides, it rides well, but I have to put quite a bit of effort in to get the best out of it. It’s noisy compared to either of my Bafang motors (M510/M820). It weighs 23 kilos.

View attachment 186175

How is the battery mount on that frame? Is it just bolts holding it from the bottle cage area like the cef50/cef55 frame?
Im Interested in this build also.

 

[MrFixit]

How is the battery mount on that frame? Is it just bolts holding it from the bottle cage area like the cef50/cef55 frame?
Im Interested in this build also.

The battery is attached to a bracket which is then bolted to the frame

 

[MrFixit]

The battery is attached to a bracket which is then bolted to the frame

View attachment 186192

It’s bolted to the bottle cage area.

 

[MrFixit]

It’s bolted to the bottle cage area.

Be mindful of which shock you fit, I originally intended to fit a Fox Float X P.S Elite 205 x 65mm, but it was hitting the frame, see photo

 

[MrFixit]

How is the battery mount on that frame? Is it just bolts holding it from the bottle cage area like the cef50/cef55 frame?
Im Interested in this build also.

Another thing to consider, I wanted cables externally routed, but was supplied with an ICR headset, the top bearing did not have a seal fitted on one side of it and there was no seal to go under the top cap assembly, not ideal for wet, gritty and muddy conditions often encounter here in the UK. So ensure you are supplied with the appropriate headset.

Can anyone recommend a ZS56/66 headset that won’t break the bank?

 

[mike_kelly]

Another thing to consider, I wanted cables externally routed, but was supplied with an ICR headset, the top bearing did not have a seal fitted on one side of it and there was no seal to go under the top cap assembly, not ideal for wet, gritty and muddy conditions often encounter here in the UK. So ensure you are supplied with the appropriate headset.

Can anyone recommend a ZS56/66 headset that won’t break the bank?

Funn