Hows everyone getting on with their New AMflow

A

avman

Member
Joined
May 24, 2021
Messages
50
Reaction score
16
Location
hull
i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the issue.
 
⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
You better get back on that 5 hour round trip again this is what is putting me off buying one no one near me is selling them plus no small frame sizes
 
Thats unlucky. Maybe they will send you the new motor via post if you are happy to fit yourself.
 
Oh no thats not good, hopefully will get sorted quickly. Mine arrived on saturday and had a great shakedown ride on Sunday on local trails. Loved the way it rode, coming from an Orbea Rise had a similar handling feel. The Power though is just immense, I will definitely dial down in the settings soon.

Hope you get yours sorted. Its the first failure I have heard of so far
 
Almost everything is made in China nowadays or overseas but that doesn't matter that much as long as customer support is equal to western world standard. DJI tick these boxes with drones but can they hold the flag for their ebike motors? We shall see aas this is sustained alot by the PRC.
 
Polar said:
If you didn't see it look around in your house and you'll probably see most parts of your stuff is made in....😉
Click to expand...
Not really, my washer and dryer are old Leandra Matt units that can be maintained (15+) years old, USA, the microwave is a 20 year old unit made in the USA, the fridge is made in Mexico as well as the stove and the water heater. I find it cheaper to buy and maintain quality items rather than buy and replace cheap crap. Anything made in mainland China is made by slave labor. Slave labor is not known for its quality.
 
avman said:
i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the issue.
Click to expand...
Hi dear customer, we are sorry to hear about the issues you are experiencing with your bike. We understand how frustrating this must be, especially after such a long trip to pick it up.

To help us diagnose and resolve the problem as quickly as possible, could you please send an email with the video of the motor issue to our support team at [email protected]? Our team will be able to assist you remotely and provide the necessary troubleshooting steps.

Additionally, to ensure we can connect with you promptly, please mention in your email that you were referred from the EMTB Forums.

Thank you for your patience and understanding. We are committed to resolving this issue for you as soon as possible.
 
mustclime said:
Not really, my washer and dryer are old Leandra Matt units that can be maintained (15+) years old, USA, the microwave is a 20 year old unit made in the USA, the fridge is made in Mexico as well as the stove and the water heater. I find it cheaper to buy and maintain quality items rather than buy and replace cheap crap. Anything made in mainland China is made by slave labor. Slave labor is not known for its quality.
Click to expand...
Maybe dont browse an Amflow Forum if you are that negative towards the bike. Many have purchased and will be coming here to share ideas/problems & tips. You may be right, the quality may end up being crap, but then again it may not. My first ebike had 5 Motor failures within the 1st year and that wasn’t made in China ( Bosch).
 
Nick_V said:
Maybe dont browse an Amflow Forum if you are that negative towards the bike. Many have purchased and will be coming here to share ideas/problems & tips. You may be right, the quality may end up being crap, but then again it may not. My first ebike had 5 Motor failures within the 1st year and that wasn’t made in China ( Bosch).
Click to expand...
If you killed 5 Bosch units in one year, the problem might be you. Back in the 70’s when I raced bmx there were kids that took pride in braking any and all frames just to prove it could be done. Is That how you are riding e bike or are you storing you it in the bottom of a pond?
 
mustclime said:
If you killed 5 Bosch units in one year, the problem might be you. Back in the 70’s when I raced bmx there were kids that took pride in braking any and all frames just to prove it could be done. Is That how you are riding e bike or are you storing you it in the bottom of a pond?
Click to expand...
Slight typo, was 5 Motors in 5 years, with Bosch a new warranty started with each new one, The final Motor has lasted 4 years and is still going strong. Not stored in a Pond but ridden in wet Uk weather. first 2 developed play in bearings, 2nd 2 had water ingress. No the problem isn’t me, have owned others ( Yamaha PWx2 & Shimano ep8) and had no similar problems
 
mustclime said:
If you killed 5 Bosch units in one year, the problem might be you. Back in the 70’s when I raced bmx there were kids that took pride in braking any and all frames just to prove it could be done. Is That how you are riding e bike or are you storing you it in the bottom of a pond?
Click to expand...
Can you guys meet up somewhere and fuck already? All this flirting is getting lame.

D
 
Nick_V said:
Slight typo, was 5 Motors in 5 years, with Bosch a new warranty started with each new one, The final Motor has lasted 4 years and is still going strong. Not stored in a Pond but ridden in wet Uk weather. first 2 developed play in bearings, 2nd 2 had water ingress. No the problem isn’t me, have owned others ( Yamaha PWx2 & Shimano ep8) and had no similar problems
Click to expand...
Indeed and agree with you. Bosch failed after 800 miles, washed & rinsed by hand weekly, dried, polished, cover removed and excess dirt removed every 2 weeks with mini hoover and stored in my warm, dry 3rd bedroom every night. I ride in eco/tour, follow all recommended seal servicing and battery maintenance etc etc - it happens right, no matter how careful we are.
 
avman said:
i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the
Click to expand...

avman said:
i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the issue.
Click to expand...
A 5 hour round trip,
avman said:
i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the issue.
Click to expand...
5 hour round trip, did you not test ride it before returning home?
 
mustclime said:
Not really, my washer and dryer are old Leandra Matt units that can be maintained (15+) years old, USA, the microwave is a 20 year old unit made in the USA, the fridge is made in Mexico as well as the stove and the water heater. I find it cheaper to buy and maintain quality items rather than buy and replace cheap crap. Anything made in mainland China is made by slave labor. Slave labor is not known for its
Click to expand...
 
I've heard of two bikes with shit bearings ,and I have seen 3 bikes with dimple below the screen. And ripples in the carbon on the top tube.
 
DS. said:
I had it with a new canyon the bike would turn on but the motor wouldn’t work so sent it back it’s a hassle when the dealer is not near you this is why I ride a Levo
Click to expand...
I been hear a lot of story about LEVO , not turning and water inside motor after 1000km. I even seen 3 levo break in one week. How do you say about it. It all basically just luck. My friend LEVO SWORK broke after 1 week and his problem its non stop until he is planning to sue Specialized for it.
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    668K
    Messages
    40,735
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top