Levo Gen 3 Changing cranks - non Speciaized offset

[mintyjim]

Yo.
I’ve just bought a 2023 Levo carbon after 4 years on a trek rail.
I had some PINND short cranks on the Rail that, technically, fit the Levo but have a different offset.
What will the effect be messing with the offset like that? What am I going to experience? PINND weren’t interested in answering my question sadly.
Cheers

 

[sam_pinnd]

Hello James,

I'm sorry your question wasn't answered.
With the offset from specialized motor the motor centreline is off the frame centreline.
Therefore cranks with a different offset either side are required to correct.
We are working on these and they aren't far from release (next couple months)
In the meantime if you used your original PINND cranks then the centre of your stance would be off the frame centreline by 4mm towards the drive side.

Hope this helps.

 

[the202]

Hello James,

I'm sorry your question wasn't answered.
With the offset from specialized motor the motor centreline is off the frame centreline.
Therefore cranks with a different offset either side are required to correct.
We are working on these and they aren't far from release (next couple months)
In the meantime if you used your original PINND cranks then the centre of your stance would be off the frame centreline by 4mm towards the drive side.

Hope this helps.

Hi Sam_pinnd,

You mentioned "We are working on these and they aren't far from release (next couple months)". I'm curious, who is "We"? I recently swapped out my Specialized OEM cranks (Praxis Offset) for a set of SRAM XO (Brose) cranks, and as you mentioned, created a 4mm divergence. For me, the difference has been negligible but I'm always interested in other options. I believe Hope Tech makes a Levo specific crankset but it's not within my budget at the moment.

For anyone interested, here is a comparison photo of the Praxis (middle two) and SRAM cranks (outer) side by side. One other note, the SRAM XO and GX (Brose) cranks are identical other than the finish (and price).

 

[sam_pinnd]

Hi Sam_pinnd,

You mentioned "We are working on these and they aren't far from release (next couple months)". I'm curious, who is "We"? I recently swapped out my Specialized OEM cranks (Praxis Offset) for a set of SRAM XO (Brose) cranks, and as you mentioned, created a 4mm divergence. For me, the difference has been negligible but I'm always interested in other options. I believe Hope Tech makes a Levo specific crankset but it's not within my budget at the moment.

For anyone interested, here is a comparison photo of the Praxis (middle two) and SRAM cranks (outer) side by side. One other note, the SRAM XO and GX (Brose) cranks are identical other than the finish (and price).
View attachment 140198

By we I mean PINND: Collections

 

[the202]

By we I mean PINND: Collections

Ah, gotcha'. Wow, you guys have some neat stuff!

 

[tehviking]

This is great news! I love my 145 pinnd cranks on my fuel EXe and have been waiting for someone to make Levo-friendly short cranks. After getting tossed OTB on a pedal strike on my Levo I’m motivated to drop some coin on the shortest cranks I can get my hands on, and the Pinnd stuff is top notch.

 

[tehviking]

@sam_pinnd Is there a place I can go to subscribe for updates on this? I’m there day one of availability.

 

[the202]

@sam_pinnd, I’m in agreement with @tehviking , I would appreciate any info regarding a release date. And – just in case you’re looking for design suggestions – I think a Levo-specific (160mm Brose) Gold-ish/Copper/Kashima/Kash Money crankset would be the perfect flagship item for launch . In the meantime, I gave in to temptation, and ordered a PINND Top Cap and Spacer set - they look awesome and they're on their way to Windrixville.

 

[the202]

Go PINND!

 

[James_MTB]

We are working on these and they aren't far from release (next couple months)

@sam_pinnd Did you finish this project? I can't see anything on your website.
Thanks

 

[sam_pinnd]

Hi James, we are upgrading our manufacturing capabilities which has put a bit of a delay on things

 

[James_MTB]

Hi James, we are upgrading our manufacturing capabilities which has put a bit of a delay on things

Thanks for the update.

Approx ETA, Q1 next year?

 

[sam_pinnd]

Check back in 4 weeks!