2024 Strive:ON
- Thread starter Rob Rides EMTB
- Start date
Jackwithoneye
Member
i ordered a new chain yesterday, i've counted about 118 links on my actual chain size M Strive On.
So i ordered a 128. Whatever, if i miscounted, i'll align with the old one and fit it to the right length
Thanks, will get a 126x link chain then
maramouse
Active member
Are Mountain Bikes Faster Downhill? | MTB VS eMTB
After riding a non-electric mountain bike for the first time in six years, Steve Jones wondered if a traditional MTB could outpace an eMTB downhill. While the e
www.embn.com
Hi guys I am thinking of buying a strive on underdog.
I have read this post from beginning to end and it’s been so helpful!
I know this must be a drag and I am sorry for asking but if anyone could give their personal opinion on frame size I would really appreciate it.
I am thinking of a medium ( I am 175cm )
I have read this post from beginning to end and it’s been so helpful!
I know this must be a drag and I am sorry for asking but if anyone could give their personal opinion on frame size I would really appreciate it.
I am thinking of a medium ( I am 175cm )
I would definitely go with a medium.
I'm 184cm and my large feels perfect.
A lot of the reviews suggest sizing down when you're between sizes but I'm glad I didn't as I think a medium would've been too small.
Stephan-Qc
New Member
Last uptade !
maramouse
Active member
today in Finale Ligure Base Nato, I saw Mr Rob in "ingegnere trail", very wet day but super fun with this bike
maramouse
Active member
beatiful bike, but please chenge the original terrible rotors disc
Stephan-Qc
New Member
Step by Step
Tieff
Active member
If you have HOPE brakes you should also use the HOPE rotors. Have you seen the HOPE rotors (especially the floating ones)? Have a look, then you know what's wrong about the (SRAM) rotors....
CrispyDesigns
Active member
I found the OEM rotor on the front to be very flexible and noisy. I swapped to a thicker Galfer rotor and it was way better. No more flex and noise on descents and also much, much quieter under braking too
Was this the green CFR model? If so yeah me too. SRAM HS2 2mm thick 220mm rotor going on.
maramouse
Active member
The SRAM Centerline rotors were the worst that SRAM has built, in fact they have now been replaced by the HS2, the main defects are noisy, on long descents they heat up too much and bend easily, a jewelery braking system and poorly made discs.
Jackwithoneye
Member
just to let you know, that the Fox X2 has a common reliability problem for years. It's called cavitation (squeeeeech noise, coming from the shock where air is mixing with the oil, which alterates the good functioning of the shock ). It's supposed to be fixed on 2024 models.
If, like me, you have a 2023 model on your Strive On (you can check on fox site with the shock's serial number), even if, like me, you don't have any problem with the shock (yet?), you're eligible for an upgrade of your shock with the 2024 updated components.
You'll have to contact your fox service center, and check with them for the upgrade under warranty.
i've done it, and they're making no problem as they are aware of the problem.
You'll certainly have to provide the serial number, the bike's invoice, and send the shock to them. Depending on how busy they are, it can take from 1 week, to 1 month (don't do it in june, it could ruin your summer rides
)
If, like me, you have a 2023 model on your Strive On (you can check on fox site with the shock's serial number), even if, like me, you don't have any problem with the shock (yet?), you're eligible for an upgrade of your shock with the 2024 updated components.
You'll have to contact your fox service center, and check with them for the upgrade under warranty.
i've done it, and they're making no problem as they are aware of the problem.
You'll certainly have to provide the serial number, the bike's invoice, and send the shock to them. Depending on how busy they are, it can take from 1 week, to 1 month (don't do it in june, it could ruin your summer rides
)thanks, I was wondering about this and might just try my luck here in Switzerlandjust to let you know, that the Fox X2 has a common reliability problem for years. It's called cavitation (squeeeeech noise, coming from the shock where air is mixing with the oil, which alterates the good functioning of the shock ). It's supposed to be fixed on 2024 models.
If, like me, you have a 2023 model on your Strive On (you can check on fox site with the shock's serial number), even if, like me, you don't have any problem with the shock (yet?), you're eligible for an upgrade of your shock with the 2024 updated components.
You'll have to contact your fox service center, and check with them for the upgrade under warranty.
i've done it, and they're making no problem as they are aware of the problem.
You'll certainly have to provide the serial number, the bike's invoice, and send the shock to them. Depending on how busy they are, it can take from 1 week, to 1 month (don't do it in june, it could ruin your summer rides
- Thread starter
- #1,249
Mars2
Active member
Intresting bike
Mars2
Active member
Does anyone know what is the Q factor of the E-thirteen crank on our bike.
Want to order shorter crank but i'm on job trip so can't look at my bike.
Thanks
Want to order shorter crank but i'm on job trip so can't look at my bike.
Thanks
CrispyDesigns
Active member
Yep. Same model. The stock rotors are fine as far as stopping goes but the noise under braking and the rubbing when off the brakes on descents is off putting to me
Seems just the Shimano 220 is flimsy. I’ll keep the rear for now as it’s quiet.
Tieff
Active member
Strive and the bolder field!
Let's go!
One + mountain... and it's lunch time!
Hope that your battery latch survived this!
That's perfect... what is it called?
Stephan-Qc
New Member
My Strive is finish now !
Friday I share you more pics on BikePark
Friday I share you more pics on BikePark
I also swapped to Galfer 223mm x 2,0mm rotors (front and rear) because of noisy Shimano rotors.
Those Galfers are quiet.
Similar Threads
-
-
-
-
-
What bike?? Canyon strive cfr on underdog vs orbea wild h20 upgrade suspension- Started by ekickonoldscott
- Replies: 1