SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

[TCFlowClyde]

My latest iteration: Version 3 with Zeb buttercup up grade. Truly buttery.

 

[TCFlowClyde]

And without the trail dirt ... "The purplinator" isn't for everyone. But most importantly, I'm luv'n the custom bling!

 

[calvintys]

19.5kg with 480wh + cushcore + pedal + coil + fox38

 

[brbr]

19.5kg with 480wh + cushcore + pedal + coil + fox38

View attachment 134516 View attachment 134517

Nice!
Carbon wheels?

 

[calvintys]

Nice!
Carbon wheels?

my wheelset front n back should be around 1.7KG.. using OEM rim with sapim CXray spoke dt swiss 350

 

[brbr]

I thin I should do less than 18kg for my wife! But commuter bike, not enduro

 

[calvintys]

I thin I should do less than 18kg for my wife! But commuter bike, not enduro

My frame carbon has been upgraded to light weight and battery casing also carbon...

 

[brbr]

My frame carbon has been upgraded to light weight and battery casing also carbon...

Nice! I don’t asked for the carbon casing, regular 480 48v.
But with a revelation which weights 1.8kg and a sidlux which is around 250gr, that should be light!

 

[calvintys]

Today got a new fork install so i give a full blast on rock garden n i think i hit some rock. The BB its too low for ebike.

 

[Myalteregohamish]

And without the trail dirt ... "The purplinator" isn't for everyone. But most importantly, I'm luv'n the custom bling!

View attachment 134509 View attachment 134510 View attachment 134511 View attachment 134512

Ask Linda if they can make you a matching truck.

 

[patdam]

Today got a new fork install so i give a full blast on rock garden n i think i hit some rock. The BB its too low for ebike.

View attachment 134545

how many height you have ? personally 350mm is the minimum

 

[TCFlowClyde]

Ask Linda if they can make you a matching truck.

View attachment 134595

Wow! Look at that undercarriage lift purple bling! Shiny!

Personally, I would've just gone one simple purple Cobra stripe up the middle on the hood and just kept it matte black solid.

I would've kept my frame solid (really faded) but the violet skulls are light reflective when I ride at sunset and cross tarmack roads for better visibility... hopefully!

 

[brbr]

And without the trail dirt ... "The purplinator" isn't for everyone. But most importantly, I'm luv'n the custom bling!

View attachment 134509 View attachment 134510 View attachment 134511 View attachment 134512

The day I switched my revelation for the Zeb ultimate charger 3, I literally exploded my best time on my favorite track, kom on the Strava emtb segment

 

[TCFlowClyde]

The day I switched my revelation for the Zeb ultimate charger 3, I literally exploded my best time on my favorite track, kom on the Strava emtb segment

Nice. I'm just trail riding but I was worried the buttercups were a little gimmicky for my riding style. My sense so far is that it they seem to add more suppleness over the RC2 damper/air spring!

 

[brbr]

Nice. I'm just trail riding but I was worried the buttercups were a little gimmicky for my riding style. My sense so far is that it they seem to add more suppleness over the RC2 damper/air spring!

Yeah, super smooth feeling !

 

[Myalteregohamish]

Today got a new fork install so i give a full blast on rock garden n i think i hit some rock. The BB its too low for ebike.

View attachment 134545

You running 27.5 in the back?

 

[atkk]

Ship finally arrived stateside. You guys remember how long it took to clear customs?

I think my frame was on the same ship, and it was delivered today in northern California, it showed up in the fedex tracking on friday.

 

[92se-r]

I think my frame was on the same ship, and it was delivered today in northern California, it showed up in the fedex tracking on friday.

Yah it was wild, ship arrived in LA on the 14th. Delivered yesterday

 

[calvintys]

How to activate Bafang M820 Walk mode.

Bafang M820 walk mode by holding the down button while pushing bike.

youtube.com

 

[calvintys]

You running 27.5 in the back?

no i am running full 29er. Yesterday got another hit on the guard. The guard look terrible now. I been using loctite 406, seen to be strong holding it.

 

[un..inc]

Linda is back in office since today...
I asked her kindly to include a second guard to my order and she was fine with it.

 

[calvintys]

Anyone try to stick a layer of this to prevent it from breaking into pieces.

 

[patdam]

Anyone try to stick a layer of this to prevent it from breaking into pieces.

View attachment 134774

I use thick (3mm) transparency self-adhesive film under the top tupe and more thin (1mm) on all other part of he frame (swing arm, seat tube/top tube and flap upper swingarm articulation)

 

[calvintys]

Nice aluminium plate, i am thinking of it too. Will get myself a tig machine soon.

 

[92se-r]

Powered up mine for the first time tonight. I seem to have the wrong firmware, it says the speed limit is 15.5mph. Any others seen this? Also my go+ app doesnt seem to allow me to change any settings other than mph or kmh. Do i have the wrong app?

 

[92se-r]

Also did you guys get grommets for where the main triangle exits and where the rear triangle enters? I just have 2 rectangle holes there with no grommets

 

[calvintys]

I use thick (3mm) transparency self-adhesive film under the top tupe and more thin (1mm) on all other part of he frame (swing arm, seat tube/top tube and flap upper swingarm articulation)

View attachment 134775
View attachment 134776

Bro what the thickness of your aluminium plate for motor caver

 

[patdam]

2mm, too thin if you plan to hit rocks. Mine is just done to protect motor from stone projection. i have also interfaced a little peace of hard rubber. The rear part is 3D printed support.

 

[calvintys]

2mm, too thin if you plan to hit rocks. Mine is just done to protect motor from stone projection. i have also interfaced a little peace of hard rubber. The rear part is 3D printed support.

Nice job bro, i just notice your 3D printed support, can share me the file. [email protected]... Thanks bro

 

[92se-r]

Ugh, anyone serviced their bearings before? Im trying not to force the linkages apart but i am having a hard time separating them to check for grease in the bearings. I have had issues with chinese frames in the past with no grease in bearings.