What did you buy your ebike this week?

⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
Nomad1 said:
I'd go with a ratch system but, that does cost more money and you may feel it's not worth it or simple not feel the need to
Click to expand...
I've been thinking of doing just this, but went with this as a quick option (and only £10) while I look into converting.

That said, when I looked into it in the past, I couldn't see all that many upsides to a ratchet system?
 
jimbob said:
I've been thinking of doing just this, but went with this as a quick option (and only £10) while I look into converting.

That said, when I looked into it in the past, I couldn't see all that many upsides to a ratchet system?
Click to expand...
I can tell you simple put it just works better
 
Hello, i recently treated my bike to a set of zeb ultimates, an excellent fork, with best damping that i have had.
20230729_140519.jpg
 
GX AXS kit for my Levo.
Because i "almost had to": new cable housing assembly apparently is impossible to do without dropping motor down.
No way to put new housing in place. Two hours i tried.

So i ride singlespeed until AXS arrives.😁
 
Kimmoi said:
GX AXS kit for my Levo.
Because i "almost had to": new cable housing assembly apparently is impossible to do without dropping motor down.
No way to put new housing in place. Two hours i tried.

So i ride singlespeed until AXS arrives.😁
Click to expand...
Cable housing is dead easy to push though on a Gen3. However nice upgrade 👍🏼
 
Christurbo said:
Cable housing is dead easy to push though on a Gen3. However nice upgrade 👍🏼
Click to expand...
Apparently i had just bad luck; i've heard that is easy on a Gen2 also.

But on my Levo it was pretty tight to pull old one out. At that moment when i pulled it out i knew i was in deep troubles.😁

New cable housing was just impossible to push thru. Maybe there's somekind of dent or something on that nylon tube which runs above motor. 🤷‍♂️
 
RustyMTB said:
Now look here young man. You've been around long enough to know you can't just leave it at that.
Click to expand...
Well in truth what I've bought is a build slot.

A build slot for a Orbea Wild M-Team Custom 2024 build, custom colour and a few spec changes.
Once i get the rough delivery date I'll start with the wheel build and see what additional Bling to purchase. I must admit I forgot I had AXS on the Heckler, and apparently I'll miss that, I'm not so sure?
 
Oury locking grips, a tubeless tire repair kit, a 12 speed master link, some 20g CO2 cartridges, and a floor stand.
 
Pedaling Innovations Catalyst One pedals (black), bought from US web site and saved 25% (maybe got lucky because no duty/VAT charged). Huge platform, now tuned with less (10 each side instead of 18) but longer pins (supplied with pedals). Take a bit of getting used to but absolutely game changers, especially downhill! Can keep feet flat instead of effectively standing on tiptoe IYSWIM. Also dropped seat 25mm so lowered CoG when seated.
 
Last edited:
Borrowed that exact kit off a mate to do my frame bearings last week. Worked like a charm.
 
steve_sordy said:
Does it count oi it was a gift?

If so, this is what my elder daughter bought me. I've always wanted one, but could never justify one as I wouldn't use it very often. Zoom in to see all the bearing sizes it will do.

View attachment 122100
Click to expand...
Not quite the same, but similar theme… I got this today.

I’ve ordered the Industry Nine Hydra toolkit, some pawls, springs and bearings from my LBS to go with it. Probably won’t need any of them for a year… but I like to be prepared!!

IMG_4965.jpeg
 
Just installed the Schwalbe Big Betty in the rear and Magic Mary up front. Gonna give these a try. i
I was running the Continental Kryptotals front and rear. I liked the way they rode, but didn’t like their durability. If these aren’t good, I’ll go back to Maxxis.

25B37A84-FDAE-4217-A3E2-93CAE869182E.jpeg 2885B665-5490-4A1F-A820-AC1E3A370718.jpeg 19F909BC-2C0B-4A95-94F8-2A852B2C05F9.jpeg
 
Cell4soul said:
Just installed the Schwalbe Big Betty in the rear and Magic Mary up front. Gonna give these a try. i
I was running the Continental Kryptotals front and rear. I liked the way they rode, but didn’t like their durability. If these aren’t good, I’ll go back to Maxxis.
Click to expand...
MM/BB is good combo. Spesh Cannibal+Eliminator T7/T9 is better though. Both are better combos than Maxxis. At least in Finnish woods.
 
Last edited:
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    669K
    Messages
    40,886
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top