• Warning!!

    Riding a tuned or deristricted EMTB is not a trivial offence and can have serious legal consequences. Also, many manufacturers can detect the use of a tuning device or deristricting method and may decline a repair under warranty if it was modified from the intended original specification. Deristricting EMTB's can also add increased loads for motors and batteries. Riding above the local law limit may reclassify the bike as a low-powered bike, requiring insurance, registration and a number plate.

    Be aware of your local country laws. Many laws prohibit use of modified EMTB's. It is your responsibility to check local laws. Ignoring it, has potential implications to trail access, and risk of prosecution in the event of an accident.

    UK Pedelec Law

    Worldwide Laws

    We advise members great caution. EMTB Forums accepts no liability for any content or advice given here. 

STUnlocker (ex Shimano STEPS Unlocker) Android & Windows App for derestriction/market change and etc

⚡ EMTB Pro Go Pro — Living Intelligence Reports, exclusive discounts & ad-free Up to 25% off Peaty's, PEMBREE, Magicshine & more · Ad-free browsing · Pro badge See the deals →
Ah I see, my firmware is too new. Thanks for that. Is there an app update coming that will support speed settings on the 8000 with the latest firmware or should I roll back at my own risk of course
 
I bought the $0.99 app

May I get few answers before I buy premium version?

1. Is it possible to increase speed limit to 40 km/h?
I read on this forum that it can be done by changing the wheel size. So, when the display shows 25 km/h it is actually doing 25 mph or 40 km/h

2. Do you plan to hack the FW 4.7.x or is it very difficult and going forward you plan to support available country settings and wheel sizes?
 
You can change country settings to US on any FW including the latest ones.
US + 1300mm will give you around 42km/h

Pivot said:
I bought the $0.99 app

May I get few answers before I buy premium version?

1. Is it possible to increase speed limit to 40 km/h?
I read on this forum that it can be done by changing the wheel size. So, when the display shows 25 km/h it is actually doing 25 mph or 40 km/h

2. Do you plan to hack the FW 4.7.x or is it very difficult and going forward you plan to support available country settings and wheel sizes?
Click to expand...
 
vadII said:
You can change country settings to US on any FW including the latest ones.
US + 1300mm will give you around 42km/h
Click to expand...

I upgraded to Premium App version and I am delighted!

The App is well designed, connect to the bike without any gymnastics, settings easy to change and save.

I have a follow-up nob question. My front wheel is 29”, rear is 27.5”.
Is the US + 1300mm still correct for the front 29” and rear 27.5”?
 
Pivot said:
I upgraded to Premium App version and I am delighted!

The App is well designed, connect to the bike without any gymnastics, settings easy to change and save.

I have a follow-up nob question. My front wheel is 29”, rear is 27.5”.
Is the US + 1300mm still correct for the front 29” and rear 27.5”?
Click to expand...
Yes, no matter what is your wheel size if you want the maximum speed and don't care about the display speed.
 
Oh, I see... I am not that bothered with absolute max we can wring-out of the bike. I am more concerned about usability and practicality.

Anyway, is it fair to conclude that since 100km/h = 62.1371 mph, we can multiply our current wheel circumference by 0.621371, to get our speedometer on the bike, to display the actual speed in mph (just ignore the km/h suffix)? A side effect is your speed-governer is uplifted from 25km/h to 25mph.

It is a clever life-hack, which I read on this forum, but I can’t find the source to give full credit.
 
Pivot said:
Oh, I see... I am not that bothered with absolute max we can wring-out of the bike. I am more concerned about usability and practicality.

Anyway, is it fair to conclude that since 100km/h = 62.1371 mph, we can multiply our current wheel circumference by 0.621371, to get our speedometer on the bike, to display the actual speed in mph (just ignore the km/h suffix)? A side effect is your speed-governer is uplifted from 25km/h to 25mph.

It is a clever life-hack, which I read on this forum, but I can’t find the source to give full credit.
Click to expand...
By changing region to usa you will get 32mph displayed as 32kph :)
 
Pivot said:
Oh, I see... I am not that bothered with absolute max we can wring-out of the bike. I am more concerned about usability and practicality.

Anyway, is it fair to conclude that since 100km/h = 62.1371 mph, we can multiply our current wheel circumference by 0.621371, to get our speedometer on the bike, to display the actual speed in mph (just ignore the km/h suffix)? A side effect is your speed-governer is uplifted from 25km/h to 25mph.

It is a clever life-hack, which I read on this forum, but I can’t find the source to give full credit.
Click to expand...
I think AZ Rick came up with that idea.....and it works great!!
 
terb said:
I think AZ Rick came up with that idea.....and it works great!!
Click to expand...

Tx terb for the reference. So I have tested AZ Rick’s idea and I optimised it to my bike.

It turns out that 1388mm circumference gets me the correct mph value on km/h display.

I had it verified by my wife driving behind me in a car, although we know that car speedometers are not perfect either.

Anyway, I am happy now
 
Hi Vadll

I see on ppl saying using the app to downgrade to v4.3.2 for e8000

Do you have any instructions or guide on how to do this?

I already have you app and the premium license thanks

Also if I have any issues with my back and want to revert everything back to default, what is the best way of resetting all my settings? Thanks
 
I settled on the US region setting and my original wheel circumference.

Having tested diff configurations, I decided that 32km/h is ideal for my use as in the woods I ride up to 20km/h and on the road I cruise at ~28km/h.

I can see the merit of higher speed on a road-bike, but on an eMTB, anything above 30km/h is cool, but totally unnecessary.

Happiness continues
 
Pivot said:
I settled on the US region setting and my original wheel circumference.

Having tested diff configurations, I decided that 32km/h is ideal for my use as in the woods I ride up to 20km/h and on the road I cruise at ~28km/h.

I can see the merit of higher speed on a road-bike, but on an eMTB, anything above 30km/h is cool, but totally unnecessary.

Happiness continues
Click to expand...

Just changed to US settings today and like you suspect this will be perfect for EMTB riding.
 
Great app by the way. In additional to the derestriction it has helped me answer questions about the ETube app that are not immediately obvious.
 
hi everyone,
i'm new here :D

can someone help me, i have some questions about some settings
i have a DU-6100 motor, now i want to change the region to usa for 32km/h
will this damage the motor or void the waranty?


BTW
nice app well done,
 
matti1207 said:
hi everyone,
i'm new here :D

can someone help me, i have some questions about some settings
i have a DU-6100 motor, now i want to change the region to usa for 32km/h
will this damage the motor or void the waranty?


BTW
nice app well done,
Click to expand...
I have been using the STUnlocker app now for 6 months on a E7000 motor (60Nm), which is in US mode and have had no issues.
As far as void the warranty, any modification software or hardware wise will void the warranty.
If you use the app and don't go crazy with the assit setting and wheel circumference for top speed you shouldn't have any issues.
 
matti1207 said:
hi everyone,
i'm new here :D

can someone help me, i have some questions about some settings
i have a DU-6100 motor, now i want to change the region to usa for 32km/h
will this damage the motor or void the waranty?


BTW
nice app well done,
Click to expand...

US setting is a legitimate config, so no risk of damage, otherwise there would be carnage in the US market.

Warranty, probably yes, unless you can keep it quiet and don’t give the dealer/manufacturer an opportunity to void it.
 
Pivot said:
US setting is a legitimate config, so no risk of damage, otherwise there would be carnage in the US market.

Warranty, probably yes, unless you can keep it quiet and don’t give the dealer/manufacturer an opportunity to void it.
Click to expand...
Thank you for the info,
Another question, do u know what the max assist is for a 6100? Now standard is it 191% on high

Grts
 
My E7000 max assist is 238%, the E8000 has a max assist 300%, don't know if you can change the max assist on the Shimano motor. The max assist maybe a hard set base on motor model.
 
Max assist is FW depended. On E8000 with 4.6.1 you can set up to 400% and 600W
On E7000 with 4.3.1 it is possible to set 300%+ of assist
 
vadII said:
Max assist is FW depended. On E8000 with 4.6.1 you can set up to 400% and 600W
On E7000 with 4.3.1 it is possible to set 300%+ of assist
Click to expand...
Just so I have it right, my E7000 is running fw 4.4.0 and max assist is 238%, but if I can back date the fw to 4.3.1 I can get max assist of 300% ?
 
vadII said:
Max assist is FW depended. On E8000 with 4.6.1 you can set up to 400% and 600W
On E7000 with 4.3.1 it is possible to set 300%+ of assist
Click to expand...
Ty for the info,
U know the assist % for a e6100? Or is it simular to a e7000?

Ty for you time
 
So, increasing from 25km/h to 42km/h is not "derestricting"? Ok...

PUMPDAD said:
Just downloaded your app and it states that everything works on 4.8.0 except the derestricting which is is on 4.3.2?
Click to expand...
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    671K
    Messages
    41,259
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top