Check out Page 8:
https://www.sram.com/globalassets/document-hierarchy/service-manuals/rockshox/front-suspension/gen000000005353-rev-c-charger-2-damper-upgrade-kit.pdf
Welcome Dan! I'm here in San Diego as well. The EMTB community is thriving despite the 'rona' and I know some shops will let you demo some bikes still if your looking to test the waters. Check out North of The Boarder or Black Mountain Bicycles
That's correct. But it was the RCT3 with LSC and Open/Pedal/Firm positioning. The HC97 gave me HSC along with LCS and rebound of course. If you plan on going with the HC97 then it doesn't matter what what type of Charger it is as long its Charger 2 or Charger 2.1, it will work for all of them.
I recently switched. Got the push to go eagle after i blew a motor mid trail. I already had a spare derailleur so all i had to do was get the cassette and shifter which i got for less than $200. Well worth it
Its pretty straight forward to install but makes a world of a difference as far as small bump and mid travel support. I have it on my Nomad and Turbo Levo Comp. To me its a no brainer for that shitty ass fork the Levo Comp comes with. Plus, I went with a larger coil to increase my travel from...
All you need to do is swap out the air spring to either 160 or 170mm. I think its around $40USD for the air spring. Or if you really feel squirrely, you can upgrade to an actual coil like the PUSH ACS3 to bump up the travel as well. Just as easy to install but once you go that route its not...
The orange theme looks dope! I have the original sintered pads and I'm curious to how long they will last given the extra weight and all. Good info, thanks!
The 2020 Comps come with the Lyrik Select and Delux Select +. I normally run a coil up front any way so I dropped in a ACS3 and that was enough to get the fork where I wanted it instead of diving and blowing thru the travel to support my fat ass! The ACS3 also bumped up the travel from 150mm to...