Velduro Rogue 170/165 mullet Enduro with DJI

cozzy said:
I guess that will be without a shock. Also hope thats vat inclusive. Annoyingly uses trunnion so my 230x65 ohlins or ext shocks won't fit. Nor my oneup droppers as they are 34mm rather than the 31mm seat tube on this.
Looks like we will get the full picture though within a month or so.
Click to expand...

I’m more inclined to believe the price now after seeing that Trek is offering the new Fuel+ as a frame only at £4400.
 
⚡ EMTB Pro Go Pro — Living Intelligence Reports, exclusive discounts & ad-free Up to 25% off Peaty's, PEMBREE, Magicshine & more · Ad-free browsing · Pro badge See the deals →
Suns_PSD said:
I personally like this bike a lot more than the E-Druid and I'm going to have to place it on my very short list: The Regulator CX, the Spectre, & the Velduro. All 3 standout to me in unique ways, but this one really hits the most points.

This thing is a really intriguing prospect.
Click to expand...
The only thing that has me a little worried about the Rogue is the chatter I'm reading about the rattle of the Avinox motor in the Crestline threads. Having owned a Wild with the new Gen 5 motor I don't know if I can go back to having a rattle box motor.
 
cozzy said:
Interesting article on the company and bike development.

spokemagazine.com

DISRUPTORS FROM DOWN UNDER - Spoke Magazine

SPOKE talks to Kiwi company Velduro Bikes about developing the DJI-powered Rogue, why they're offering a frame-only option, and how they're beating the big players on price.
spokemagazine.com spokemagazine.com
Click to expand...
interesting, the wheel path extends quite a bit more when run as a mullet, maybe the chainstay length at sag is not as short as i thought:

1756152732967.png
 
jbrown15 said:
The only thing that has me a little worried about the Rogue is the chatter I'm reading about the rattle of the Avinox motor in the Crestline threads. Having owned a Wild with the new Gen 5 motor I don't know if I can go back to having a rattle box motor.
Click to expand...
If you have a gen 5 wild why on earth do you need to change? Just for decadence purposes?
 
Plummet said:
If you have a gen 5 wild why on earth do you need to change? Just for decadence purposes?
Click to expand...
I work in the industry, I get new bikes every 10-12 months. We're looking at becoming a dealer for Velduro so I'd like to try one. I like trying brands we sell so that I can give honest opinions on them. We sell Cannondale, Transition, Orbea, AmFlow, Forbidden and looking at selling Velduro bikes now that they have a Canadian distributor.
 
jbrown15 said:
I work in the industry, I get new bikes every 10-12 months. We're looking at becoming a dealer for Velduro so I'd like to try one. I like trying brands we sell so that I can give honest opinions on them. We sell Cannondale, Transition, Orbea, AmFlow, Forbidden and looking at selling Velduro bikes now that they have a Canadian distributor.
Click to expand...
You need to receive the handle
"Bike slut"......
 
Heard the uk stock won't be here till march 2026, so winding the excitement levels down a few notch's till then.
Not really an issue as i don't ride over winter anyway.
 
cozzy said:
Heard the uk stock won't be here till march 2026, so winding the excitement levels down a few notch's till then.
Not really an issue as i don't ride over winter anyway.
Click to expand...
How come? That's when Eebs really come into their own, Especially in the UK
 
Highland Wheels said:
How come? That's when Eebs really come into their own, Especially in the UK
Click to expand...
Dont like getting cold, wet and ruining my bike! Mtb is a summer hobby for me.
People say it's always raining here, it really isnt and being retired im not limited to weekends.
 
Haha fair enough, I'd go insane if I stopped riding through the winter because it got a bit colder and wetter. Although up here in Scotland it's like thag year round really 😂
 
sethimus said:
there will be at least one @ testRIDE Lenzerheide, anything you guys want me to ask them/take photos?
Click to expand...
Take plenty of pics please 😊
If you can check it will definitely take a mechanical derailleur (and dropper). Im led to believe it can, but have only seen wireless sram stuff fitted.
Maybe query them on their sizing recommendations? The reach numbers appear short for suggested height.
Have a good test ride 👍
 
sethimus said:
there will be at least one @ testRIDE Lenzerheide, anything you guys want me to ask them/take photos?
Click to expand...
  1. Weigh the bike and provide size and build spec, if possible.
  2. Pay attention to idler design and build as this can be a wear point and and source of noise.
  3. In general, pay attention to noise with the bike. How much do you think is attributed to idler/chain versus motor noise.
  4. Another anecdotal sampling of DJI/Avinox motor noise would be appreciated (pedalling vs. downhill), as it seems motor noise is all over the map depending on motor labelling, bike design, and other intangibles. This may be one area where the Rogue high-pivot/idler design may help out with noise, reduced pedal-kickback and chain-whip.
  5. Pay attention to rear suspension lateral flex. The swing arm is actually mounted fore of the seat tube, which implies that is longer than some other designs. This should produce a more stable instant center, but the linkage bearings will take on extra load.
  6. Comments on riding dynamics are welcome. It would be good if you had experience with other high-pivot bikes to compare to other HP bikes that typically have greater axle path growth. If not, then try to tease out the bikes intrinsic performance in technical climbs, corners, downhill, jumps, etc.
  7. If you've owned or auditioned a DJI-powered bike, then you should be able to differentiate the performance of the bike on its own design merits. Otherwise, you will likely be overwhelmed by the DJI motors characteristics flooding your perception of the bike. Most of us already know what DJI brings to the table (vicariously for most of us), so I'm looking what this bike specifically provides. Maybe you can detune the motor before your ride for this reason.
 
slickrock said:
  1. Weigh the bike and provide size and build spec, if possible.
  2. Pay attention to idler design and build as this can be a wear point and and source of noise.
  3. In general, pay attention to noise with the bike. How much do you think is attributed to idler/chain versus motor noise.
  4. Another anecdotal sampling of DJI/Avinox motor noise would be appreciated (pedalling vs. downhill), as it seems motor noise is all over the map depending on motor labelling, bike design, and other intangibles. This may be one area where the Rogue high-pivot/idler design may help out with noise, reduced pedal-kickback and chain-whip.
  5. Pay attention to rear suspension lateral flex. The swing arm is actually mounted fore of the seat tube, which implies that is longer than some other designs. This should produce a more stable instant center, but the linkage bearings will take on extra load.
  6. Comments on riding dynamics are welcome. It would be good if you had experience with other high-pivot bikes to compare to other HP bikes that typically have greater axle path growth. If not, then try to tease out the bikes intrinsic performance in technical climbs, corners, downhill, jumps, etc.
  7. If you've owned or auditioned a DJI-powered bike, then you should be able to differentiate the performance of the bike on its own design merits. Otherwise, you will likely be overwhelmed by the DJI motors characteristics flooding your perception of the bike. Most of us already know what DJI brings to the table (vicariously for most of us), so I'm looking what this bike specifically provides. Maybe you can detune the motor before your ride for this reason.
Click to expand...
I can reply to some of this!

Idler is stainless steel not aluminum
so should be all good, also confirmed 126 links so just one chain.

One interesting thing I noticed is the rear ends are quite fat towards the hub side of the chain stays and seat stays, like a bowed out design, looked sturdy! I rode a medium at 90kg and 6’3 and was feeling pretty solid, not much flex.

Chainstays length felt really nice, but didn’t get much time on bigger jumps to really suss how axle path felt, smaller jumps it felt really nice! The rear end was so supple though with the fox float X2, felt so good downhill, very plush, like a coil, and felt stable even when too small for me! Though first time on high pivot, so couldn’t speak to other bikes rear end growth, like Druid ebike with crazy chain stay lengths.

Anything else I’d be kind of guessing on, and felt light jumping around! noticeable compared to my current 24.5kg ebike. But unsure of actual weight and size makes a difference to how that feels. They say 22kg-ish.
 
Last edited:
so i could only test an m bike, felt similar to the forbidden druid i also tested, albeit weight is gonna be a bit more i guess, the testbikes weight was claimed at 22.5kg, but with unrealistic exo tires. so more like 24ish with proper tires and coil shock. swiss distribution will sell also the framekit, price will be 4499 chf (8.1% vat incl.) available early 26
 
I think this yellow looks sick, like the Trek Fuel exe 9.9 when it came out. I have just come from like 2 black ebike frames in a row, so it could just be wanting a contrast, but I'm curious what people think of this colour? would go well with Ohlins too.
1756865169609.png
velduro yellow.jpg
 
sethimus said:
so i could only test an m bike, felt similar to the forbidden druid i also tested, albeit weight is gonna be a bit more i guess, the testbikes weight was claimed at 22.5kg, but with unrealistic exo tires. so more like 24ish with proper tires and coil shock. swiss distribution will sell also the framekit, price will be 4499 chf (8.1% vat incl.) available early 26
Click to expand...
Thanks for interesting tidbits, but can you hit us with a bit more detail here? You are probably one a few people on the planet that has ridden both of the only high-pivot DJi models on the market. This is exactly the bake-off I'm interested in:
  1. What size was the Druid you tested and was it the Core or the Lite?
  2. You say the bikes feel similar, but in what exact ways? The Druid has longer rear-center and shorter rear travel and longer front-center. The Rogue has longer swingarms and longer instant center, but shorter axle path at the high-pivot. I would have expected more differences based on some reviews coming out on the Druid so far.
  3. How about motor rattle? Did one sound quieter than the other?
  4. Any noise issues at the idler gear between the the two?
  5. Can you tease out performance in corners, technical uphills, and downhills? (trying to stay away from Loam Wolf Bingo terms like playfulness and poppiness). The Rogue is really more of an enduro rig than the e-Druid. Wondering how much this comes into play with your riding experience on this bike.
 
Alex NZ said:
I think this yellow looks sick, like the Trek Fuel exe 9.9 when it came out. I have just come from like 2 black ebike frames in a row, so it could just be wanting a contrast, but I'm curious what people think of this colour? would go well with Ohlins too. View attachment 167313View attachment 167312
Click to expand...
The ultimate Tonka Toy / DeWalt Power Tool color. Remarkably more striking in this rendition. Begs what other colorways can be selected.
 
slickrock said:
Thanks for interesting tidbits, but can you hit us with a bit more detail here? You are probably one a few people on the planet that has ridden both of the only high-pivot DJi models on the market. This is exactly the bake-off I'm interested in:
  1. What size was the Druid you tested and was it the Core or the Lite?
  2. You say the bikes feel similar, but in what exact ways? The Druid has longer rear-center and shorter rear travel and longer front-center. The Rogue has longer swingarms and longer instant center, but shorter axle path at the high-pivot. I would have expected more differences based on some reviews coming out on the Druid so far.
  3. How about motor rattle? Did one sound quieter than the other?
  4. Any noise issues at the idler gear between the the two?
  5. Can you tease out performance in corners, technical uphills, and downhills? (trying to stay away from Loam Wolf Bingo terms like playfulness and poppiness). The Rogue is really more of an enduro rig than the e-Druid. Wondering how much this comes into play with your riding experience on this bike.
Click to expand...
it was raining shit tons so i only took the velduro on the blue flow half up the mountain for a 10min ride, the forbidden i had longer and was riding it outside the park on a slow enduro track with wet slick rocks. was a s3, can’t really compare them, both felt too short. i thought the velduro was rattling a bit but only on a few harder compressions as it was a blue flow so again hard to judge. all the noise was drained out by the rain rattling on my helmet…

both had those shitty mavens on and unfamiliar bad setuped suspension thats way worse than what i am used to
 
That's a banging colour but it'll clash with my orange forks. :cry:
 
You must log in or register to reply here.
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    672K
    Messages
    41,496
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top