Share your current mileage on your Rise
- Thread starter LeMec
- Start date
<400 but in my defence i've not had it that long and am a busy boy
bike 2 has 0 on it.... but it's only getting shipped this afternoon.
bike 2 has 0 on it.... but it's only getting shipped this afternoon.
cookie70
Active member
6700 km in just under 2 years got the dreaded E010 fault couple of weeks ago, awaiting word from the dealer 
For the most part its been awesome, just issues with creaking suspension/motor that has been problematic to completely solve.
For the most part its been awesome, just issues with creaking suspension/motor that has been problematic to completely solve.
I can resolve the creaking... just not forever6700 km in just under 2 years got the dreaded E010 fault couple of weeks ago, awaiting word from the dealer
For the most part its been awesome, just issues with creaking suspension/motor that has been problematic to completely solve.
Creak creak, strip-down the suspension/linkages/etc re-torque the little tool, bit of grease on the spacers and bolt heads, put back together, silence. Ride, ride, ..... creak..... repeat. At the end of the day it's a 15 minute job tops.... so hardly a massive thing.
I'm going to fit the 23-24 2 piece linkage next time i strip it down and see how that does instead.
mtbrdan
Member
5118 miles with a motor swap back in November and a swingarm replacement as well.
Pics!Day after I started this thread… I check my Rise for an ongoing creak, and turns out that I have a major crack in the lower chainstay….. that will teach me to post something like this
Hopefully the warranty process is pretty quick.
- Thread starter
- #11
mtbrdan
Member
Super common failure.
Richridesmtb
Member
Int
Interested to hear what the clicking noise turns out to be. My motor has clicked for quite some time. I keep riding it.
3 weeks later, FOC warranty replacement motor has just arrived at my main dealer2500 miles/4000km
2yrs 4mth
It's been faultless, but...
Just dropped it off at dealer for diagnostics due to E01020 errors
Quite pleased as it was over 4 months outside of warrantyHowever, as it's a stock new EP8 motor it doesn't have the Orbea RS firmware already on it.
Dealer will be getting Orbea to remotely flash this onto the new motor, and only then are they stating I'll get 2yrs warranty on it.
No indication/feedback on the actual cause of the motor failure
Last edited:
NorthernBloke
Member
E1010 failure on first after approx 4000 km, replaced under warranty, second one going strong (touch wood) after 2000km
I am doing circa 2000km per year and after three years only the original frame, suspension, dropper, front wheel and brake levers remain.
Everything else has been replaced going from XTR to XT along the way.
Great bike but once fully paid off not sure I'd go with Orbea again
I am doing circa 2000km per year and after three years only the original frame, suspension, dropper, front wheel and brake levers remain.
Everything else has been replaced going from XTR to XT along the way.
Great bike but once fully paid off not sure I'd go with Orbea again
BiGJZ74
E*POWAH Master
I had the same issue, I filed my warranty claim and also sent pics of my spindles (e13 cranks fell off early in ownership.) Frame and Motor being replaced. Sending bike out tomorrow. 2600miles on my Rise H15
Last edited:
mikegarf
Member
M10 - 2000miles @ 2 years old. No issues so far. Hope it stays that way now that the warranty has ended. 
ebsocalmtb
Well-known member
2,900mi / 4,666km and still on my first motor. I have been through 2 speed sensors and still get occasional speed sensor error codes. Motor seems to limit power and acts a bit weird occasionally. Hoping to get one more season out of it and then fire sale the bike.
westcoastmtbr
Active member
1800 miles. Change of motor due to update error over a year ago. All good since and enjoying ti!
How'd you get them to replace the motor? My wife's Rise, at just a couple of months over 2 years was making a lot of noise and Shimano won't do anything. We were quoted $1100 for a new motor.3 weeks later, FOC warranty replacement motor has just arrived at my main dealer
However, as it's a stock new EP8 motor it doesn't have the Orbea RS firmware already on it.
Dealer will be getting Orbea to remotely flash this onto the new motor, and only then are they stating I'll get 2yrs warranty on it.
No indication/feedback on the actual cause of the motor failure
My local Orbea dealer is also a Shimano service centre, and they spoke direct with the UK Shimano distributor/importer and they "just did it"?? I hadn't even bought the bike from that dealer!
I've had mine since the 15th March and have 880km on there now... Less than i'd thought. I've got more on the manuals for sure.
