Kenevo peak power problem mission control

[Tex]

Hi evertbody had my kenevo for a few months now and loving it, i was playing about with the tuning again this week and for some reason when i change the peak power in either eco, trail or turbo it changes all off them to match, it still lets me change input individually does anybody elses mission control do this

 

[cozzy]

Sounds like an out of date firmware. Mine did this pre update.

 

[Tex]

Cheers cozzy, i ask spesh where and how to get updates never really got an answer but going into dealers on sat he wasnt to keen to have a look dont really think they are interested in ebikes apart from selling them, will see what he comes up with if i could find the software and firmware updates would do it myself, just trying to find another bike to see if its app related or bike related is a nightmare and there is that many variables its hard to troubleshoot without dealer software.

 

[Tex]

Just out interest, what versions of firmware are you on now.

 

[cozzy]

19 expert
motor 5.0.4
battery 2.17.1

 

[Tex]

Mines is
Motor is 5.0.4
Bat is A.16.3
Prob wasnt done when left shop but going into LBS to get firmware updates

 

[Dfriz]

My 19
motor 7.1.1
battery A.17.1

 

[Tex]

Well all sorted now running the latest firmware
motor 7.1.1
battery A.17.1

 

[Skelly]

Well all sorted now running the latest firmware
motor 7.1.1
battery A.17.1

does anybody know what are the latest firmware versions for a 2019 kenevo comp?

 

[Tex]

Bike shop plugged it into pc which syncs with spesh server and auto installs firmware version for kenevo there was only 3 remote, motor and battery so mines should have the latest firmware which is stated in post

 

[Skelly]

Cheers
the info of the mission control app shows me the figures below which are different to those above. Is yours a 2019 comp kenevo?

14.6.3 battery
5.4.0 motor

 

[Tex]

Yip, will go have another look and see and post back

 

[Zimmerframe]

I think A.17.1 has been the latest 19 Kenevo battery firmware for a while.

5.0.4 was the latest motor firmware until a couple of months ago when it jumped to 7.1.1, which had some power delivery refinements (smoother acceleration response).

 

[Skelly]

Cheers
just to add, that I don’t get the option to adjust the acceleration in the app. Is this because the motor is the 1.2e and this isn’t an option or out of date firmware?

 

[Zimmerframe]

Cheers
just to add, that I don’t get the option to adjust the acceleration in the app. Is this because the motor is the 1.2e and this isn’t an option or out of date firmware?

Yup, that's on 2.1 motors .

 

[bhudzallmighty]

Currently purchased a 19 kenevo expert and on motor fw 5.0.4. Just curious, after updating to 7.1.1 did you have any issues with power? Like maxing out at 15A? Would like to have the latest firmware but current have no issues with my current FW other than immunable to set different peak power on each mode on Mission Control

 

[Spicey]

Hi I know this is an old post but I just got KENEVO updated to 7.1.1 and it feels slow, and shit in turbo especially. Did you find out the problem. Thanks.