Ep801 & stunlocker

[squeegee]

Ok so it’s not in the app yet. Hopefully soon.

Texano999 already confirmed minimax with PCE02 is working, torque and power adjustments on EP801. Top speed requires license 119 euros, derestriction of EP801 not confirmed...yet.

 

[Eethon]

Texano999 already confirmed minimax with PCE02 is working, torque and power adjustments on EP801. Top speed requires license 119 euros, derestriction of EP801 not confirmed...yet.

I’ve just asked, the app does not adjust top speed at present. You can however pay to have the top speed raised by taking it to them in Germany or via Remote Desktop on your pc. That Remote Desktop tuning comes with a licence key for the app. If you have to put the firmware back to standard (for warranty etc) you would then have to pay for the remote tuning again (at a slightly lower price) that is unless they implement the speed adjustment on the app by then.

So it is possible with the SM-pce02 cable on a bespoke basis but the app does not support it yet.

 

[squeegee]

I’ve just asked, the app does not adjust top speed at present. You can however pay to have the top speed raised by taking it to them in Germany or via Remote Desktop on your pc. That Remote Desktop tuning comes with a licence key for the app. If you have to put the firmware back to standard (for warranty etc) you would then have to pay for the remote tuning again (at a slightly lower price) that is unless they implement the speed adjustment on the app by then.

So it is possible with the SM-pce02 cable on a bespoke basis but the app does not support it yet.

Interesting. I wonder if there is some kind of security or device on their end preventing them from integrating the top speed for EP801 in their software, or some kind of legal ramifications. Power and torque no problem but top speed no? Seems strange.

A planetary gear on rear hub/speed sensor could be a short term fix, not sure if those are available for EP801 or not

 

[Eethon]

Interesting. I wonder if there is some kind of security or device on their end preventing them from integrating the top speed for EP801 in their software, or some kind of legal ramifications. Power and torque no problem but top speed no? Seems strange.

A planetary gear on rear hub/speed sensor could be a short term fix, not sure if those are available for EP801 or not

I think it’s more a matter of keeping it secret. They can do it but can’t do it in a way that won’t stop someone copying their method.

 

[texano999]

I think it’s more a matter of keeping it secret. They can do it but can’t do it in a way that won’t stop someone copying their method.

It is possible to increase speed on ep801 but still not completelly improved in minimax …will come.. right NOW they can do Connecting from remote using several tools

 

[Shutter11]

Ep801 tuned successfully power and torque with minimax and pce801 .

I am new to all this. I had an older Rise that I increased the torque on with ST Unlocker. Are you saying I can do that on my new 2023 if I get a Shimano SM-PCE02-B3 Di2 PC Linkage Device and use Minimax??? I only have the little left Sl600 remote. DO I unplug the cord from it and plug into the PCE02???? I only care about my torque not speed.

 

[texano999]

I am new to all this. I had an older Rise that I increased the torque on with ST Unlocker. Are you saying I can do that on my new 2023 if I get a Shimano SM-PCE02-B3 Di2 PC Linkage Device and use Minimax??? I only have the little left Sl600 remote. DO I unplug the cord from it and plug into the PCE02???? I only care about my torque not speed.

NOW you can do with emax app

 

[Shutter11]

NOW you can do with emax app

Ok. I have Emax as well. I still need the SM-PCE02-B3 Di2 PC Linkage Device?

 

[texano999]

Ok. I have Emax as well. I still need the SM-PCE02-B3 Di2 PC Linkage Device?

Con emax app you can do with Bluetooth

 

[Shutter11]

Con emax app you can do with Bluetooth

I tried Emax Mobile it connected to bike, read the bike info but both setting areas are grayed out.

 

[texano999]

I tried Emax Mobile it connected to bike, read the bike info but both setting areas are grayed out.

You need to push the button get bike information

 

[Shutter11]

You need to push the button get bike information

Thank you. It appears my license is not working but they are helping me. Cross your fingers and hopefully tomorrow I get a 85nm bike!!!

 

[texano999]

Thank you. It appears my license is not working but they are helping me. Cross your fingers and hopefully tomorrow I get a 85nm bike!!!

License not needed for torque and power change

 

[Shutter11]

License not needed for torque and power change

I have an android and that software was licensed. Android currently does not do it. When I wen to iOs it goofed it up and froze the app. It is all fixed now and my bike is tweaked.

 

[Ozone08]

I have an android and that software was licensed. Android currently does not do it. When I wen to iOs it goofed it up and froze the app. It is all fixed now and my bike is tweaked.

Did you de-restrict with the app yourself or did you do a remote session?

 

[crucible]

I use windows version of STunlocker with a license. I connect to the bike at the EW-E100 junction using the PCE02 module. This method avoids all of the firmware issues when using only BT. I am able to customize the "Power and Torque" settings in the screen shot in my previous post, I don't think this is possible using only a BT connection. My question for anyone that might know is will this work on the EP801rs as well on 2023 model Rise? Works perfectly on my 2021 EP8.

I connect as shown below to bike, this is an extra EW-100 I have just for an example

View attachment 120819

I did it with my EP801RS and it works great.

 

[Fane]

Hi guys i'm new on the forum, i have an orbea rise h10 2025 and i just want change the power wh, can i do it with st unlocker?, i'm on the latest ep801 firmware. Thanks !