Levo SL Gen 1 Check your Levo SL

Konanige

Active member
Joined
Feb 29, 2020
Messages
428
Reaction score
339
Location
Mendips
I have sideways play on the crankshaft of my SL, has anyone else found this, is it an issue?
 
⚡ EMTB Pro Go Pro — exclusive discounts & ad-free Peaty's 25% off & more · Ad-free browsing · Pro badge See the deals →
There's a slight bit of gear lash when rotating the cranks on my SL and also on mrs levity's, but nothing I'd describe as "sideways play". As @Fivetones suggested you should cross-post this in the SL Owners thread.

Levo SL Owners Thread - EMTB Forums
 
I put it up as a separate thread so as not to get lost in all the what mudguard, spring, how much does it weigh etc talk. I think this could be a real issue!
 
Not very good with computer tech, if you grab hold of Crank on motor end and pull and push it there is about 1-1.5 mm movement, like on a normal bottom bracket before you preload the bearings.
 
I gave mine a wiggle when passing it in the garage a minute ago.
I pulled my crank too and forth near the bottom bracket with significant force, but have absolutely no play whatsoever in mine.

I can only assume this is what you’re referring to since you can’t post an example?

I probably only have ~100 miles on mine so far though.
 
Popped round to Bicycle Chain W-s-m earlier and spoke to one of the guys from behind glass, he said Spesh say 1-1.5mm play is fine any more and its an issue apparently they have had one failure in the shop so far.
 
I also just waddled on my cranck in the garage. Everything seems normal, no play. I have already driven 600 km.
 
Keep reading
    Browse all

    Similar Threads

    Community Stats

    Since 2018
    669K
    Messages
    40,827
    Members
    Join 30,000+ Riders, it's free!
    Back
    Top