BT-E8036 Battery connector - Are replacements available?

[Wookie_73]

Hi
The connector on the battery has developed a fault.
Looks like the internal tabs which push against the spade connector in the frame have been damaged. Leading to some overheating and further damage of the connector on the battery.
I only realised this was happening as the bike cut out on me on a ride today.
I was wondering if anyone knew of a source of these connectors so I can fit a new one.

Hope someone can help.

 

[Ryzo]

Hi Wookie_73,

Did you find a replacement part? I've got the same problem

 

[cream]

No manufacturer will sell individual battery parts(internal). Which is a total waste, especially in those cases where the battery is perfectly fine but the connector is faulty. Your best bet is to find a faulty battery with a good connector. It's the same as BT-8035 and older BT-8014 (not 100%sure). In any case, if you find a good connector, you also need to replace the frame mount (that is also damaged).

 

[Avgooch]

I’ve had the same problem with the bike shutting off. Just looked at the terminal and found one of the plates has come off.