noise

  1. slickrock

    MS2 vs M2 Motor Rattle and other Intangibles

    There's been a whole lot of reviews discussing the performance superlatives of the M2S motor, as the flagship successor to the M1. Yet there's been pray little chatter about the base M2 motor. It seems even the base model of a number of bike makers only offer the M2S, and those few that do...
  2. A

    Levo Gen 3 Levo g3 clicking noise

    Hey guys, I have a problem with my Specialized Turbo Levo G3 Expert. I’m getting a creaking/clicking sound when I compress the shock beyond 30%. I’ve already tried a different shock with New mounting hardware, different linkage, replaced all the bearings, put foam over the cables inside the...
  3. Shandeew

    Turbo Levo Brose 1.3 Grinding Noise

    What do you guys think could be the cause of this grinding noise on my Turbo Levo 2018 bike ? It's coming from inside the motor, only when using pedal assist. No noise when backpedaling, and when the assist is turned off there is zero noise. It starts about 20 minutes into the ride, and from...
    • Shandeew
    • Thread
    • belt brose noise specialized turbo levo
    • Replies: 4
    • Forum: Brose
  4. alpineworld

    "toc toc" sound coming from new PW-X3

    Hi all, I am riding a brand new Raymon Hardray E 7.0 with the Yamaha PW-X3, just bought it last week. I want to understand if a noise I hear is normal or not. The concern is due to the fact that for the first 20-30km it did not make this noise (maybe I didn't notice it?). The noise is coming...
  5. ABMichal

    Cube with performance CX 4.gen

    Hi, i still have a problem with creaking crank arm?! Well my bike was creaking a lot and i have checked bolts on motor and they seem fine (even though i f*cked one small bolt). Well i kinda found out that the creaking comes from the crank arm bolt, yesterday i have torque it somehow and well it...
    • ABMichal
    • Thread
    • bosch crank crank arm crank arm bolt creak noise squeak
    • Replies: 0
    • Forum: Bosch
  6. MarcusTwice

    Other SOLVED: Specialized Levo (2018) Brose 1.2 Motor - Clunk Noise

    I own a 2018 Specialized Levo Hardtail and has been a joy with zero problems until now. Unfortunately it has developed a ‘clunk’ when pedaling under load in the highest gear (small cog). Please take a look at the movie, as I need advice… https://youtube.com/shorts/mk8VYzW8zZw Thanks for...
  7. Comparing noise from 8 emtb motors

    Comparing noise from 8 emtb motors

    We’ve taken a closer look, or rather listen, at 8 of the motors we’ve ridden lately. This is a comparison of full power emtb motors, yet one of the contenders is the small and mild TQ HPR50 motor. This is the most silent motor we’ve ever ridden, so we included it as a benchmark. Sure, it’s a tad...
  8. Tim1023

    Why do my disc brakes keep becoming contaminated?

    Since I've had the bike, I've repeatedly had problems with screaming brakes. I've come to the conclusion that it's simply contamination. On the rear brake, I put this down to careless washing on my part transferring crap from the drive train. Both front and back brakes have similar problems...
  9. Scaff

    2020 E-Sommet Headset/fork creaky cracking noise

    Anyone know what this could be, bike only 1 month old, happened after cleaning it first time using normal cleaning technique, no jet wash etc... makes cracking noise when you stoppie or on impact, I've taken fork out and cleaned up bearings and regreased and still the same hopefully the vid...
    • Scaff
    • Thread
    • crack creak e-sommet esommet noise vitus
    • Replies: 3
    • Forum: Vitus
  10. R

    Shimano e8000 knocking noise

    Afternoon all, On a ride this morning and about 10 miles into the 30 mile ride after some shredding on local trails I noticed this knocking noise. Lifted the rear wheel (motor still on) and just span it using my hand not turning the pedal and on every revolution it made a knock. Did the same...
  11. C

    YT Decoy Pro Race annoying noise - solved!

    Hi all. I'm new to this forum... at least as a "supplier" of cases and solutions... and normally I am a "consumer"... or a "spy" to get some comments and solutions. Ok! I ride a 2019 YT Decoy ProRAce, equipped with e13 wheels, hubs and cassette. Probably many of you, if not all have experience...
  12. Bearing Man

    Yamaha motor full overhaul video

    After starting with the Bosch motors we have just completed a Yamaha PW motor strip and overhaul. And, I have finally sourced the grooved bearings, seals and O-rings, now all available on my site. We are currently working on the Impulse-2, Panasonic and Brose. Much more content will be added...
  13. Downsman

    2017 Levo FSR jangling noise from back of bike at speed

    I have a 2017 Levo FSR purchased 4 months ago, which has had an irritating noise since new. Above about 15mph, a jangling noise is evident from the rear of the bike. At first I thought it was from the motor, but am now reasonably certain it is from something striking the brake rotor. The black...
Back
Top