Search results

For Levociraptor in USA you should contact the UK distributor.. check it on www.levociraptor.com

I'm using the HRM from decathlon... It is Bluetooth and ANT+..

In order to use BLEvo with the new MasterMind TCU, you should buy Levociraptor.. Please go to www.levociraptor.com to check it.

Try to install Strava App on the phone and retry to authorize Strava from BLEvo..

Did you try to enter in GPX Import configuration and press the button "Deselect all the GPX"?

If I understood well, for developing an app on the iphone to read the HR data from the watch, I have to implement also the app on the watch.. And this is not planned... sorry for this..

Yes, the Smart Power works on the SL2 motor. Only the speed value is not displayed correctly. You should use GPS data.

Yes you can use the same phone.. You should scan for new bike when you change the battery. Please take care that evenif the battery is switched off, BLEvo will find it so it is better to give the name to the battery..

If the new phone is running Android 12 or later, the folder is not the same... you can see the new folder under "GPX Import" menu...

In the old phone maybe the data was stored under /BLEvo/.. You can try to copy all the files inside this folder on the new phone..

If you see the green connector I think Levociraptor will work correctly with the Tero bike... Please contact at [email protected] for more details..

There are some picture and link here https://blevo.forumfree.it/?t=77109351&st=45

A few days ago I released version 3.12.5 of BLEvo for Android. Here the changes introduced - Added audio message for enabling/disabling Crash detection (very useful for understanding when to put the bike down without activating the crash detection) - Added audio prompt for high power (>900...

The distance is get from the bike. If the data is not updated means that the bike doesn't send the distance. To avoid the issue you can use the GPS data in the configuration menu..

Please remove any calibration of the DEM. In the pictures posted, there is the calibration with DEM activated..

This happen only when the TCU doesn't restore the de restricted value.. In some firmware version can happen

I found the link where explain how to use another App on Karoo device. I think it is not so difficult to do.. I use the King Kong 2 mini in Portrait mode and it is not so bad, so maybe also Karoo device can be good.. Maybe the screen is too small (3.2" vs 4")..

The very strange thing is that the consumed battery is not the "Start" - "End" battery. BLEvo reads the values from the battery and report it.. Maybe I have to check the CSV file to understand better.. Can you send it to [email protected] with copy/paste of this message? Thanks.

This is an old model of the Levo/Kenevo without the TCU, so maybe you can unlock the speed for this bike with BLEvo... you cannot use Levociraptor on these bikes..

I saw that in some batteries the value given is greater than 700wh... I should check if I can understand where is the configuration..