Search results for query: *

I noticed of the three motor bolts two seem to be made of aluminum and seem like standard bolts somewhat available on Aliexpress and do not have issues with the m820 housing as far as sticking or reactions. The third bolt (10x90mm) is not as easily found on AE and is made of, I think, steel and...

Great report, thanks. Mine ordered similarly. For those doing the own painting, about how hard would it be to disassemble the frame 'as delivered' to componet parts for sanding, etc. Beautiful bike!!!

I got a closeup drawing of the seat tube for depth measurements. No pics, no geo. chart but was told 500mm reach which is all I had asked about and that was for the XL.

One would think that, but here we are. Got my CEF50 on the market and ordering new parts so I am 'all in' as they say. Jim has been very responsive with technical details and a few drawings as I want a longish dropper post and Arcos headset and will be doing my own painting. Wish I could do...

Same here - can't wait :)

Push down on both pedals at same time with both feet and all your weight with pedals at 9 o'clock and 3 o'clock then gently with top of one foot spin them 180 degrees and agree repeat push down. If they don't move or speak you can rule out pedals and crank arms. And this is how they should be...

These are the two axles I have bought for my V2 Size XL with Axis UHD Transmission. They both work perfectly. I got the longer one because I wanted to adjust the Transmission distance from the hub using a washer to two to fine tune shifting. Eventually I just went back with the shorter axle...

Thank you for your contribution. Could you tell us why you like this 43v firmware you are sharing here? I am tempted to make it my first attempt at flashing my 43v CEF50. But honestly am very happy with everything as it is. What do you like or dislike with this firmware? I DIY'd a 12p3s...

These (both top and bottom) are exactly what I ordered last summer for my CEF50 and they work perfectly though I did gently tap out the stock bottom bearing cup to use the one that came from Acros. The nomenclature is confusing.

Error 30 is loose cable. Make sure there is plenty of slack in the cable near the headset.

Great build and photos so far, keep it up! LightCarbon is clearly a premium member of this space, but for taller riders just not an option. I do wish it were economically viable (Jim if you're listening - I've never met a tall person who was poor :) as I would die for a LC930.

Clipping trees is the World's way of telling you that you're alive :). Rental 760, stem and grips here.

Yeah man, I'm always down for a ride and am about to go stir crazy because of the weather. I've done 1-6. I would say that loops 5-6 and onwards should be done first as they require max effort/concentration - for me anyway. I did 6 this summer when new to mountain biking and had just finished...

North Shore is one of the best trails around for sure. Great looking bike!

Nothing from the manu. that I am aware of but every 2,500km seems to be mentioned most. There is at least one very detailed instruction set located here. I didn't use the finer needle bearing grease, just used the recommended aviation grease - Mobil 28 - on everything. The motor seemed just a...

Re-grease if at or near service interval. I did mine only a few 100 km's from new using instructions from here and can not say it changed much but 1) now have piece of mind, 2) know that occasional sounds aren't anything serious and 3) assured it is properly greased.

My CEF50 has no perceptible flex with me 170lbs/6'4" and I have nearly maxed out the 170mm/165mm travel the best I can do around here in Dallas. I can't help you on the battery questions as I make my own but do not think Bafang makes batteries for different bike brands - just their motors...

I am running a HEPPE L183 M12x1.0 TL30 thru axle into my SRAM GX Tramission. I would not run anything longer as the end of the axle almost bottoms out in the Transmission retaining bolt.

My 12speed Sram GX Transmission cassette (XS-1275) needed the chain stain slightly 'polished' to make room for the chain otherwise it would hit the stay and make a noticeable sound.

My bad, I forgot there are two different forums for the routing of the cables. I used Acros NON-INTEGRATED. I have no experience with integrated cables. Sorry again but wish you best of luck.