Orbea responded that the notch is part of the painting process, and not required. They sent me a video showing them using a flat head and a pick to pry it out. I'll give it a go later on.
I'll email orbea and see what they say, probably goto a shop, the closest one is an hour away unfortunately, I got this one from across the country when they were hard to find. Thanks for the offer, mine's a medium, I imagine they are different than the large.
Correct, I do not have that notch, yes it the non drive side bearing, I already swapped the drive side without any drama. I do have the BearingPro tools and did attempt to press the bearing away from the clip, but didn't feel it shift honestly, you can see from the backside there is no gap from...
I'm having real trouble getting the C clip out of the chainstay, someone else's pic had a little notch to help get it removed, but my '21 M doesn't. I've tried a few picks, a few screw drivers, and even ground down a small screw driver head to try and get above and behind the clip to get it to...
I haven't taken this side out yet, but it looks like if you squeeze the circlip and push the head of the sleeve back into the frame, it should tighten back up.
Lol, this is my friend's bike, get it in the mail! just kidding.
He's going to put ohlins stuff, AXS and nice wheels, cockpit etc, so we'll how light it gets when he's done.
sequentially, if you see battery % on a garmin or similar device, you get 100% of both though, and it will not indicate when it switches between them. You can push the battery level button on the extender to see how much of it you have used though.
I'm about to do this, but have only gotten to the dissemble step. I loosen the screw holding the brake hose in place on the head tube and pushed it into the frame a bit, I could then pull the hose cover out of the chainstay and move it out of the way to get the axle out. I also used a rope to...
Did anyone confirm this yet? I broke another tab, and would like to change to the H style, I can't tell though if maybe the hole is a different size for the different plugs?
Anyone else have a M series charger that looks like this? I think the shop I got mine from sent me a non oem charger. I borrowed my friends charger which looks different and is from a '22, and it works now. Emailed orbea to confirm.
I just got a Extender for my '21 M10, the box says carbon RS '22 model, it works with the bike, but trying to charge it again, it's flashing the LED's for load overload. I only have the stock charger to test, anyone had this? I can borrow a friends charger to try, but my bike charges fine.
For me my M10 with the 540 would be perfect, I assume it's the same +2lbs as stated for the H model difference, but at this point it would really only allow me to keep a water bottle on the bike compared to the range extender, which I just got on a BF sale. They are saying the lightest build is...
E Tube says an update is available, FIRMWARE UPDATES | E-TUBE PROJECT | E-TUBE | E-TUBE PROJECT-US Just says General Big fixes, well I'd be curious as which bugs it fixed honestly. Anyone got more info?
The YT decoy also has this type of headset, but I don't know if it limits more or less than what orbea uses. I wonder if they switched from a 36 to a 38 and never fully checked clearance?
Nope, zero compatibilty, the ebike crank arms are very specific to the motor, you need EP8 compatible arms, I did switch out my E13s to shimano just to be safe, I found them on ebay, I think it was an italian seller: Cranks Arms for EP8 Engine Hollowtech FC-M8150 6 5/16in SH-IFCM8150MX SHIMANO
Sounds like you just need to cut the motor when you approach other people and pedal past silently, if you happen to have the display on your bars, switch it out for the little box with the led's instead. I've literally stopped and talked with other bikers and they were surprised when I told...