Ok so I have a shimano groupset and a sunrace cassette 12 speed with a Microspline freebody and when I bought the bike from the store they gave me a spare sram cassette which I was told will fit. Question is will it fit as that seems a bit odd that sram fits in shimano.
Spec is sram AM CS...
Ok so I usually wear tracky bottoms with my golf waterproof trousers over the top but the hem is totally knackered as it gets caught in the chain. I have seen these, they are cheap so don’t expect much but I just need something water repellant really. Anyone had any good experiences with any of...
If I have the shimano mt410 hub which after searching has the microspline fixing, I also have the thru axle pictured and want to buy new wheels the
Nukeproof Horizon Pro Rear Wheel 148mm Boost 148mm x 12mm
Will everything fit back together is my question?
Ok so I noticed the rear tyre losing pressure slightly, it was getting low in terms of grip so I bought a new tyre same brand (maxxis) but got assegai instead. Changed the valves as well and cleaned it all and put in new sealant and it’s still doing it, I then sprayed a soapy solution around the...
Hi all, Ok so hope v4 vs current brakes shimano m420.
Not going to lie main reason of thinking about these other than anything else is looks, I am a tart.
Question 1
I assume they will be much better than my current setup? In terms of performance.
Question 2
If I refer to them in terms of...
Hi all, Ok so hope v4 vs current brakes shimano m420.
Not going to lie main reason of thinking about these other than anything else is looks, I am a tart.
Question 1
I assume they will be much better than my current setup? In terms of performance.
Question 2
If I refer to them in terms of...
Ok so firstly there is the expense, tubed is the cost of an inner tube so say £5, tyre levers £5 and a pump £10. Tubeless is valves at £25, sealant £15, rim tape £15, tyre pump £50. So after all that is it worth it? None of my mates bother with it, they get a puncture, they change the tube and...
Ok so had my first puncture today on my tubeless maxxis minion dhr. It was right in the centre and fairly big which the sealant didn’t seal so, I have plugged it and got it back up with my co2 shot. My question is, is it safe to ride from now on or should I buy a new one? Co2 has been replaced...
Hi guys, ok so bought a co2 inflator as I run tubeless and thought if I get. Big picture and plug it I can re inflate it. So I take it that it’s a emergency thing only? I ask because I bought in hast thinking it’s a good idea to just use that but reading into it maybe not. So it loses pressure...
Ok so I have m4100 shimano brakes with the attached dropper post lever, is this possible to take off completely and use a clamp style lever? Want to change out for a wolf or pnw one.
So just thought after seeing Robs video on wrapping his i bike I wanted to get mine done. Seeing as the Orbea has neon matte paint I wanted to protect it. Ordered the full kit which as 35 odd pieces in it, I must have put on at least 3/4 of it some I didn’t feel the need to put on. I found the...
Ok so this tends to happen after a while of usage. It works absolutely fine then after a while it freely goes up but doesn’t want to go down. The collar clamp isn’t over tight and the post isn't right at the bottom of its limit so doesn’t appear to be too tight on the cable. Any thoughts on why...
Ok so my mate and I have the same bike wild fs H30 same year 2021 I have xl he has large but we have different Spec I.e I have race face wheels he has Orbea ones. We both shimano decore brakes but he has 1 finger levers and different calipers. Is that normal?
Ok, so has anyone else had this problem? When fitting the battery it is a tight fit and seems to squeeze on the 2 lower cables near the connection point effecting the dropper post and gears.